1. W_AT208.EXE Driver
2. IBMLAN20.TXT File Contents

IBMLAN20.TXT Driver File Contents (W_AT208.EXE)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WaveLAN Software                                              May 26, 1993
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

      INSTALLATION OF WAVELAN NDIS DRIVER ON IBM LAN SERVER 2.0

Required files
--------------
    (1)    NDIS driver WVLAN02.OS2
    (2)    Driver Description file WAVELAN.NIF

Installation Steps
------------------
Reference: Network Administration Manual
           Volume 1: IBM LAN Server 2.0 Planning and Installation
           (starting page 3-12)

    (1)	Go to an active OS/2 Full Screen session.
    (2) Insert Server Install/Diskette 1 into drive A.
    (3) Type "a:laninst"  at the commandline prompt and press ENTER.
    (4) Select "ADVANCED" as the desired type of installation.
    (5) The install script will ask you to insert the
        "Network Adapter Drivers" diskette to load the IBM-certified
        drivers (WaveLAN is not on this diskette [yet]).
    (6) When loading of these drivers has been completed a menu screen with
        the following options appears:

            o   Configure Workstation
            o   Copy additional Network Adapter Drivers
            o   Configuration Complete

    (7) Select the appropriate option  [yes indeed: the middle one].
    (8) You will be asked to identify the full pathname e.g.
                  a:\ibmlan
    (9) The files in this sub-directory of the (copy of the) WaveLAN
        software diskette will then be loaded.
   (10) When the loading is completed the menu, shown above in step 6,
        is displayed again, now select the Configure Workstation option.
   (11) You will note that the name "WaveLAN Adapter" has been
        added to the list of Network Adapter Drivers from which you may
        select your favorite  [ i.e. WaveLAN ].
   (12) While you are at this Configure Workstation option, you may view
        or modify the parameter values for each of the Protocol Drivers
        that you may have added.
   (13) After you have pressed ENTER or clicked on OK, the installation
        script re-displays the menu shown in step 6 above, this time you
        select the Configuration Complete option and let the script
        complete its work.
   (14) When the installation script has finished you would follow the
        suggestion to shut-down and re-boot.
   (15) When the machine starts up, you will see that the WaveLAN driver
        gets loaded via the screen message:
       "WaveLAN NDIS Driver V2.xx
        Network ID = nn nn   Security Feature Disabled"   [or Enabled]

Sample files CONFIG.SYS and PROTOCOL.INI that resulted from a configuration
with two Protocol Drivers (IBM IEEE 802.3 and IBM OS/2 NETBIOS) follow.

<config.sys>

IFS=C:\OS2\HPFS.IFS  /CACHE:64 /CRECL:4
PROTSHELL=C:\OS2\PMSHELL.EXE
SET USER_INI=C:\OS2\OS2.INI
SET SYSTEM_INI=C:\OS2\OS2SYS.INI
SET OS2_SHELL=C:\OS2\CMD.EXE
SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS
SET RUNWORKPLACE=C:\OS2\PMSHELL.EXE
SET COMSPEC=C:\OS2\CMD.EXE
LIBPATH=C:\MUGLIB\DLL;C:\IBMLAN\NETLIB;.;C:\OS2\DLL;C:\OS2\MDOS;C:\;......
 ......C:\OS2\APPS\DLL;C:\ibmcom\dll;
SET PATH=C:\IBMLAN\NETPROG;C:\MUGLIB;C:\OS2;C:\OS2\SYSTEM;C:\OS2\MDOS\WINOS2;....
 ......C:\OS2\INSTALL;C:\;C:\OS2\MDOS;C:\OS2\APPS;
SET DPATH=C:\IBMLAN\NETPROG;C:\IBMLAN;C:\MUGLIB;C:\OS2;C:\OS2\SYSTEM;...........
 ......C:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\;C:\OS2\BITMAP;C:\OS2\MDOS;.........
 ......C:\OS2\APPS;C:\ibmcom;
SET PROMPT=$i[$p]
SET HELP=C:\OS2\HELP;C:\OS2\HELP\TUTORIAL;
SET GLOSSARY=C:\OS2\HELP\GLOSS;
PRIORITY_DISK_IO=YES
FILES=20
DEVICE=C:\ibmcom\lanmsgdd.os2 /I:C:\ibmcom
DEVICE=C:\ibmcom\protman.os2 /I:C:\ibmcom
DEVICE=C:\ibmcom\protocol\LANDD.OS2
DEVICE=C:\ibmcom\protocol\LANDLLDD.OS2
DEVICE=C:\OS2\TESTCFG.SYS
DEVICE=C:\OS2\DOS.SYS
DEVICE=C:\OS2\PMDD.SYS
BUFFERS=30
IOPL=YES
DISKCACHE=512,LW
MAXWAIT=3
MEMMAN=SWAP,PROTECT
SWAPPATH=C:\OS2\SYSTEM 2048 2048
BREAK=OFF
THREADS=256
PRINTMONBUFSIZE=134,134,134
COUNTRY=001,C:\OS2\SYSTEM\COUNTRY.SYS
SET KEYS=ON
REM SET DELDIR=C:\DELETE,512;D:\DELETE,512;E:\DELETE,512;
BASEDEV=PRINT02.SYS
BASEDEV=IBM2FLPY.ADD
BASEDEV=IBM2ADSK.ADD
BASEDEV=OS2DASD.DMD
SET BOOKSHELF=C:\IBMLAN\BOOK;C:\OS2\BOOK
SET EPATH=C:\OS2\APPS
REM DEVICE=C:\OS2\APPS\SASYNCDB.SYS
PROTECTONLY=NO
SHELL=C:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS /P
FCBS=16,8
RMSIZE=640
DEVICE=C:\OS2\MDOS\VEMM.SYS
DEVICE=C:\OS2\MDOS\VMOUSE.SYS
DOS=LOW,NOUMB
DEVICE=C:\OS2\MDOS\VDPX.SYS
DEVICE=C:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=C:\OS2\MDOS\VDPMI.SYS
DEVICE=C:\OS2\MDOS\VWIN.SYS
DEVICE=C:\OS2\MDOS\VCDROM.SYS
DEVINFO=SCR,VGA,C:\OS2\VIOTBL.DCP
SET VIDEO_DEVICES=VIO_VGA
SET VIO_VGA=DEVICE(BVHVGA)
DEVICE=C:\OS2\MDOS\VVGA.SYS
DEVICE=C:\OS2\POINTDD.SYS
DEVICE=C:\OS2\MOUSE.SYS
DEVICE=C:\OS2\COM.SYS
DEVICE=C:\OS2\MDOS\VCOM.SYS
REM CODEPAGE=437,850
DEVINFO=KBD,US,C:\OS2\KEYBOARD.DCP
DEVICE=C:\IBMCOM\PROTOCOL\NETBEUI.OS2
DEVICE=C:\IBMLAN\NETPROG\RDRHELP.200
IFS=C:\IBMLAN\NETPROG\NETWKSTA.200 /I:C:\IBMLAN /N
DEVICE=C:\IBMCOM\PROTOCOL\NETBIOS.OS2
RUN=C:\IBMLAN\NETPROG\LSDAEMON.EXE
RUN=C:\ibmcom\protocol\landll.exe
RUN=C:\ibmcom\protocol\netbind.exe
RUN=C:\ibmcom\lanmsgex.exe
DEVICE=C:\IBMCOM\MACS\WVLAN02.OS2

<protocol.ini>

[PROT_MAN]
 DriverName = PROTMAN$

[IBMLXCFG]
 WAVELAN_nif = WAVELAN.nif
 LANDD_nif = LANDD.nif
 NETBEUI_nif = NETBEUI.nif

;*----------------------------------------------*
;*------------- PROTOCOL SECTION ---------------*
;*----------------------------------------------*

[LANDD_nif]
 DriverName = LANDD$
 Bindings = WAVELAN_nif
 ETHERAND_TYPE = "I"
 SYSTEM_KEY = 0x0
 OPEN_OPTIONS = 0x2000
 TRACE = 0x0
 LINKS = 8
 MAX_SAPS = 3
 MAX_G_SAPS = 0
 USERS = 3
 TI_TICK_G1 = 255
 T1_TICK_G1 = 15
 T2_TICK_G1 = 3
 TI_TICK_G2 = 255
 T1_TICK_G2 = 25
 T2_TICK_G2 = 10
 IPACKETS = 250
 UIPACKETS = 100
 MAXTRANSMITS = 6
 MINTRANSMITS = 2
 TCBS = 64
 GDTS = 30
 ELEMENTS = 800

[NETBEUI_nif]
 DriverName = netbeui$
 Bindings = WAVELAN_nif
 ETHERAND_TYPE = "I"
 USEADDRREV = "YES"
 SESSIONS = 40
 NCBS = 95
 NAMES = 21
 SELECTORS = 5
 USEMAXDATAGRAM = "NO"
 ADAPTRATE = 1000
 WINDOWERRORS = 0
 TI = 30000
 T1 = 500
 T2 = 200
 MAXIN = 1
 MAXOUT = 1
 NETBIOSTIMEOUT = 500
 NETBIOSRETRIES = 8
 NAMECACHE = 0
 PIGGYBACKACKS = 1
 DATAGRAMPACKETS = 2
 PACKETS = 350
 PIPELINE = 5
 MAXTRANSMITS = 6
 MINTRANSMITS = 2
 DLCRETRIES = 5


;*----------------------------------------------*
;*--------------- MAC SECTION ------------------*
;*----------------------------------------------*


[WAVELAN_nif]
 DriverName = WVLAN$
 IOBase = 0x300