*****************************************************************************
Software for WaveLAN/ISA, Version: 3.20 February 5, 1996
*****************************************************************************
WaveLAN/ISA Software comprises drivers, configuration tools and diagnostic
tools. This readme.txt contains information that pertains to this software
but was not available at the time that the User's Guide was printed.
*****************************************************************************
Table of Contents:
1. Installation notes
2. Technical Constraints
3. Currently unsupported functions
4. Technical Support
5. Software versions
*****************************************************************************
1. Installation notes
2. Technical Constraints
2.1. ODI
As the ODI driver is built to include the latest NetWare technologies, it
requires an up-to-date protocol stack. LSL should be version 2.11 or
higher, IPXODI, NETX or the VLMs should be of the same level.
To use new functions in the ODI driver, and to optimize the usage of
conventional memory, using VLMs is recommended.
As this version of the NetWare protocol stack may not yet be available at
your location, we have provided the latest update of this software on the
WaveLAN installation diskette. Execute the file VLMUP.BAT (available in
subdirectory VLM of the diskette and copied to your hard disk during the
install process) to extract all NetWare information. Read VLMUP4.TXT for
information on how to install this software. If you do not have the Novell
VLM stack implemented, run the standard Novell Client Installation program
as provided with your NetWare Operating System before doing this upgrade,
or copy only LSL.COM and IPXODI.COM from these updates.
2.2. NetWare Server drivers
This diskette does not contain NetWare Server drivers. If these drivers
are needed for the WaveLAN/ISA 915 MHz NIC or the Full Size WaveLAN/ISA
2.4 GHz NIC they can be retrieved from our Website or Bulletinboard
(see section 4).
These drivers are available in the AT release 2.08 software. Note that
these drivers are not compatible with the Half Size WaveLAN/ISA 2.4 GHz
NIC.
2.3. OEMSETUP.INF not compatible with IBM DOS Requester
The file OEMSETUP.INF supplied on this disk is suitable for use with
Windows For Workgroups. It can however not be used for IBM DOS Requester.
To install IBM DOS Requester copy OEMSETUP.IBM to OEMSETUP.INF. The disk
is now ready for IBM DOS Requester installation. The file OEMSETUP.OS2 can
be used when installing IBM OS/2 Requester. Copy this file to OEMSETUP.INF
before installing the requester software. To make this disk suitable for
Windows For Workgroups again copy OEMSETUP.WFW back to OEMSETUP.INF.
3. Currently unsupported functions
No NetWare server drivers are available for the Half Size WaveLAN/ISA
2.4 GHz NIC
4. Technical Support
If you encounter problems when installing or using this product or have
questions about our other WaveLAN products, you can reach us at the
addresses listed below. Please use the WaveLAN Driver Problem Report form
where applicable and send it to us by Fax or E-Mail.
This form is available on the WaveLAN diskette as WVLANPRF.TXT (Plain text
format) You can always consult our BBS to see if new versions of the
software are available
Useful telephone numbers:
U.S.A.:
Telephone: +1 800 ATT WAVE
Fax: +1 513 445 5552
The Netherlands:
Telephone: +31 30 6097554
Fax: +31 30 6097552
BBS Line 1: +31 30 6097553
BBS Line 2: +31 30 6039417
E-mail (Internet):
Support@WCND.ns-nl.att.com
World Wide Web:
http://www.ncr.com/product/wavelan
5. Software versions
The following software is provided on this diskette:
DOS ODI Driver:
\WVLAN05.COM version 3.04
\NET.CFG
\WVLAN05.INS
\DRIVER.LST
DOS NDIS-2 Driver:
\MSLANMAN.DOS\DRIVERS\WAVELAN\WVLAN09.DOS version 4.07
\MSLANMAN.DOS\DRIVERS\WAVELAN\PROTOCOL.INI
\MSLANMAN.DOS\DRIVERS\NIF\WVLAN09.NIF
\OEMSETUP.INF
\OEMSETUP.WFW
\OEMSETUP.IBM
OS/2 NDIS-2 Driver:
\MSLANMAN.OS2\DRIVERS\WAVELAN\WVLAN10.OS2 version 4.07
\MSLANMAN.OS2\DRIVERS\WAVELAN\PROTOCOL.INI
\MSLANMAN.OS2\DRIVERS\NIF\WVLAN10.NIF
\IBMLAN\WVLAN10.OS2 version 4.07
\IBMLAN\WVLAN10.NIF
\OEMSETUP.OS2
Miscellaneous utilities:
\UTIL\INSTCONF.EXE version 1.08
\UTIL\IRQ.EXE version 1.08
\UTIL\SETIRQ.BAT
\UTIL\SETCONF.EXE version 1.06
\CPY2HDSK.BAT
\UTL2BOOT.BAT
\UTIL\CONFIG.SYS
\UTIL\AUTOEXEC.BAT
Point to Point Diagnostics:
\UTIL\PTPDIAG.EXE version 4.16
Frequency Select Utility:
\UTIL\WFREQSEL.EXE version 1.16
WavePOINT Access Control Program:
\UTIL\WPACCESS.EXE version 2.34
\UTIL\ACC_HLP.HLP
\UTIL\SYS$ERR.DTA
\UTIL\SYS$HELP.DTA
\UTIL\SYS$MSG.DTA
NetWare VLM protocol stack:
\VLM\VLMUP4.EXE
\VLM\VLMUP.BAT
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.