1. W_AT320.EXE Driver
2. PROTOCOL.INI File Contents

PROTOCOL.INI Driver File Contents (W_AT320.EXE)

;PROTOCOL.INI entry for the WaveLAN Communications Adapter (OS/2 driver).
;
;Type		= NDIS
;Title		= "WaveLAN NDIS 2 Driver"
;
;Tag		= AT_Address
;Display	= "Adapter I/O Base Address"
;Type		= HexNum
;Set		= 0x300, 0x390, 0x3E0, 0x3C0
;Default	= 0x300
;This parameter identifies the I/O Base Address used by the WaveLAN PC-AT
;adapter.  The value selected must match the I/O Base Address that is set by
;the hardware switches on the WaveLAN PC-AT adapter.
;This parameter is for use on ISA machines only. An error will be generated if it 
;is used together with PCMCIA_Socket, MCA_Slot or Config_Address
;
;Tag		= Station_Address
;Set		= 0x02,0x00,0x00,0x00,0x00,0x00 - 0xFE,0xFF,0xFF,0xFF,0xFF,0xFF
;Default	= None
;This parameter identifies the Local MAC Address for ; which this station is 
;configured. The ;second digit of the first byte should be 2, 6, A or E.
;
;Tag		= NWID
;Display	= "WaveLAN Network ID"
;Type         	= HexNum
;Set		= 0x0100 - 0xFFFF
;Default	= None
;This parameter sets the Network ID. It will overrule, but not change, the 
;value stored on the card.
;
;Tag		= Encryption_Key
;Display	= "Encryption Key"
;Set		= 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 -
;		  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
;Default	= 0
;This parameter enables encryption and sets the WaveLAN encryption key if non-zero. 
;In case zero is specified encryption will be disabled.
;
;Tag		= Domain_ID
;Display	= "Domain ID"
;Set		= 0x0000 - 0xFFFF
;Default	= 0x0001
;This parameter enables roaming, and specifies the Domain ID of the roaming
;coverage area. It must match the Domain ID of your access points. Absence
;(or a zero value) of the parameter disables roaming.
;This parameter is ignored for PC-AT and PC-MC adapters.
;
;Tag		= Beacon_Key
;Display	= "Beacon Key"
;Set		= 0x0000 - 0xFFFF
;Default	= 0
;This parameter specifies the Beacon Key your access points use to encode the
;WaveLAN Network ID (NWID) carried in the Beacon messages. It must match the
;Beacon Key used by access points.
;This parameter is ignored for PC-AT and PC-MC adapters.
;
;Tag		= Station_Name
;Display	= "Station Name"
;Set		= Ascii
;Default	= None
;This parameter specifies the station's name, which can be displayed by the 
;Point-to-point diagnostics tool.
;
DriverName 	= WVLN10$
AT_Address	= 0x300
Domain_ID 	= 0x0001
Beacon_Key 	= 0
Encryption_Key 	= 0

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.