;------------------------------------------------------------
;
; Copyright (C) 1994
; Interphase Corporation, Dallas, TX 75234
; All Rights Reserved
;
; Author:
; Sameer Nanda (06/11/97)
;
;------------------------------------------------------------
;------------------------------------------------------------
;
; OEMSETUP.INF file for the Interphase ATM PCI driver.
;
;------------------------------------------------------------
[Identification]
OptionType = NetAdapter
AsigOptionType = NetTransport
[PlatformsSupported]
PCI
[Options]
IP5515
;************************************************************
; CONSTANTS FOR USING DIALOGS
;************************************************************
[FileConstants]
;
; File names, etc.
;
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
;
; EventLog Message File
;
;NetEventDLL = "%SystemRoot%\System32\netevent.dll"
NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\ip5515si.sys;%SystemRoot%\System32\drivers\asig.sys"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
; Product Info
;
Manufacturer = "Microsoft"
ProductMajorVersion = "0"
ProductMinorVersion = "1"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
;
; Software
;
ProductSoftwareName = "Ip5515si"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\ip5515si.sys"
NetRuleSoftwareType = "ip5515siSys ndisDriver ip5515siDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """Ip5515siSys"" yes no container"
NetRuleSoftwareClass = {"ip5515siDriver basic"}
NetRuleSoftwareBindable = {"ip5515siDriver ip5515siAdapter non exclusive 100"}
;
; Hardware
;
ProductHardwareName = "Ip5515si"
NetRuleHardwareType = "ip5515si ip5515siAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"ip5515siAdapter basic"}
;
; Registry Key
;
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
ElanName = ""
AtmAddr = "4700790000000000000000000000A03E00000100"
; 1577 Stuff
ArpIPAddress = "127.0.0.1"
ArpIPMask = "255.255.255.0"
; Asig values
AsigSoftwareType = "transport"
AsigProductSoftwareName = "Asig"
AsigProductSoftwareImagePath = "\SystemRoot\System32\drivers\asig.sys"
AsigSoftwareType = "transport"
AsigNetRuleSoftwareType = "asig netBiosTransport"
AsigNetRuleSoftwareClass = {"netBiosTransport"}
AsigNetRuleSoftwareUse = $(AsigSoftwareType)" yes yes"
AsigNetRuleSoftwareBindForm = """Asig"" yes yes simple"
AsigProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(AsigProductSoftwareName)"\CurrentVersion"
AsigParamKeyName = $(!NTN_ServiceBase)"\"$(AsigProductSoftwareName)"\Parameters"
AsigOption = "ASIG"
[GeneralConstants]
; Set this value to enable debug messages.
;!DebugOutputControl = 1
;
; Program flow control variables.
;
from = ""
to = ""
;
; Return codes; Exit_Code is set to one of these
;
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
; Number of Client = 4
; Added one more client for 1577 (from 3 to 4)
;ClientMaxUnit = 4
ClientMaxUnit = 16
;ClientMaxUnit = 3
; Number of Client = 8
MaxLesNumber = 7
Slash = "\"
ExitState = "Active"
OldVersionExisted = $(FALSE)
AsigOldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
IPAddress01 = {""}
IPAddress11 = {"10.1.1.2"}
IPAddress21 = {"10.1.1.3"}
IPAddress31 = {"10.1.1.4"}
IPAddress41 = {"10.1.1.5"}
IPAddress51 = {"10.1.1.6"}
IPAddress61 = {"10.1.1.7"}
IPAddress71 = {"10.1.1.8"}
IPAddress81 = {"10.1.1.9"}
IPAddress91 = {"10.1.1.10"}
IPAddress101 = {"10.1.1.11"}
IPAddress111 = {"10.1.1.12"}
IPAddress121 = {"10.1.1.13"}
IPAddress131 = {"10.1.1.14"}
IPAddress141 = {"10.1.1.15"}
IPAddress151 = {"10.1.1.16"}
IPAddress161 = {"10.1.1.17"}
IPAddress02 = {""}
IPAddress12 = {"10.1.2.2"}
IPAddress22 = {"10.1.2.3"}
IPAddress32 = {"10.1.2.4"}
IPAddress42 = {"10.1.2.5"}
IPAddress52 = {"10.1.2.6"}
IPAddress62 = {"10.1.2.7"}
IPAddress72 = {"10.1.2.8"}
IPAddress82 = {"10.1.2.9"}
IPAddress92 = {"10.1.2.10"}
IPAddress102 = {"10.1.2.11"}
IPAddress112 = {"10.1.2.12"}
IPAddress122 = {"10.1.2.13"}
IPAddress132 = {"10.1.2.14"}
IPAddress142 = {"10.1.2.15"}
IPAddress152 = {"10.1.2.16"}
IPAddress162 = {"10.1.2.17"}
IPAddress03 = {""}
IPAddress13 = {"10.1.3.2"}
IPAddress23 = {"10.1.3.3"}
IPAddress33 = {"10.1.3.4"}
IPAddress43 = {"10.1.3.5"}
IPAddress53 = {"10.1.3.6"}
IPAddress63 = {"10.1.3.7"}
IPAddress73 = {"10.1.3.8"}
IPAddress83 = {"10.1.3.9"}
IPAddress93 = {"10.1.3.10"}
IPAddress103 = {"10.1.3.11"}
IPAddress113 = {"10.1.3.12"}
IPAddress123 = {"10.1.3.13"}
IPAddress133 = {"10.1.3.14"}
IPAddress143 = {"10.1.3.15"}
IPAddress153 = {"10.1.3.16"}
IPAddress163 = {"10.1.3.17"}
IPAddress04 = {""}
IPAddress14 = {"10.1.4.2"}
IPAddress24 = {"10.1.4.3"}
IPAddress34 = {"10.1.4.4"}
IPAddress44 = {"10.1.4.5"}
IPAddress54 = {"10.1.4.6"}
IPAddress64 = {"10.1.4.7"}
IPAddress74 = {"10.1.4.8"}
IPAddress84 = {"10.1.4.9"}
IPAddress94 = {"10.1.4.10"}
IPAddress104 = {"10.1.4.11"}
IPAddress114 = {"10.1.4.12"}
IPAddress124 = {"10.1.4.13"}
IPAddress134 = {"10.1.4.14"}
IPAddress144 = {"10.1.4.15"}
IPAddress154 = {"10.1.4.16"}
IPAddress164 = {"10.1.4.17"}
IPAddress05 = {""}
IPAddress15 = {"10.1.5.2"}
IPAddress25 = {"10.1.5.3"}
IPAddress35 = {"10.1.5.4"}
IPAddress45 = {"10.1.5.5"}
IPAddress55 = {"10.1.5.6"}
IPAddress65 = {"10.1.5.7"}
IPAddress75 = {"10.1.5.8"}
IPAddress85 = {"10.1.5.9"}
IPAddress95 = {"10.1.5.10"}
IPAddress105 = {"10.1.5.11"}
IPAddress115 = {"10.1.5.12"}
IPAddress125 = {"10.1.5.13"}
IPAddress135 = {"10.1.5.14"}
IPAddress145 = {"10.1.5.15"}
IPAddress155 = {"10.1.5.16"}
IPAddress165 = {"10.1.5.17"}
IPAddress06 = {""}
IPAddress16 = {"10.1.6.2"}
IPAddress26 = {"10.1.6.3"}
IPAddress36 = {"10.1.6.4"}
IPAddress46 = {"10.1.6.5"}
IPAddress56 = {"10.1.6.6"}
IPAddress66 = {"10.1.6.7"}
IPAddress76 = {"10.1.6.8"}
IPAddress86 = {"10.1.6.9"}
IPAddress96 = {"10.1.6.10"}
IPAddress106 = {"10.1.6.11"}
IPAddress116 = {"10.1.6.12"}
IPAddress126 = {"10.1.6.13"}
IPAddress136 = {"10.1.6.14"}
IPAddress146 = {"10.1.6.15"}
IPAddress156 = {"10.1.6.16"}
IPAddress166 = {"10.1.6.17"}
IPAddress07 = {""}
IPAddress17 = {"10.1.7.2"}
IPAddress27 = {"10.1.7.3"}
IPAddress37 = {"10.1.7.4"}
IPAddress47 = {"10.1.7.5"}
IPAddress57 = {"10.1.7.6"}
IPAddress67 = {"10.1.7.7"}
IPAddress77 = {"10.1.7.8"}
IPAddress87 = {"10.1.7.9"}
IPAddress97 = {"10.1.7.10"}
IPAddress107 = {"10.1.7.11"}
IPAddress117 = {"10.1.7.12"}
IPAddress127 = {"10.1.7.13"}
IPAddress137 = {"10.1.7.14"}
IPAddress147 = {"10.1.7.15"}
IPAddress157 = {"10.1.7.16"}
IPAddress167 = {"10.1.7.17"}
IPAddress08 = {""}
IPAddress18 = {"10.1.8.2"}
IPAddress28 = {"10.1.8.3"}
IPAddress38 = {"10.1.8.4"}
IPAddress48 = {"10.1.8.5"}
IPAddress58 = {"10.1.8.6"}
IPAddress68 = {"10.1.8.7"}
IPAddress78 = {"10.1.8.8"}
IPAddress88 = {"10.1.8.9"}
IPAddress98 = {"10.1.8.10"}
IPAddress108 = {"10.1.8.11"}
IPAddress118 = {"10.1.8.12"}
IPAddress128 = {"10.1.8.13"}
IPAddress138 = {"10.1.8.14"}
IPAddress148 = {"10.1.8.15"}
IPAddress158 = {"10.1.8.16"}
IPAddress168 = {"10.1.8.17"}
IPMask = {"255.255.255.0"}
IPAddressString = "IPAddress"
IPString = ""
[date]
; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
;
; Check if the platforms requested is supported
;
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
Debug-Output "IP5515: Platform (Bus) NOT Supported!"
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
Debug-Output "IP5515: Language NOT Supported!"
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;
; form a list of all the options and another of the text representing
;
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;------------------------------------------------------------
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
;------------------------------------------------------------
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
else
Debug-Output "IP5515: ERROR: NOT NCPA!"$(!NTN_Origination)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
;
; Assume all is well.
;
set CommonStatus = STATUS_SUCCESSFUL
EndWait
;
; Set up the operation-mode-based variables and gaily welcome
; the user. If the "install mode" variable is improperly set,
; assume this is a new installation.
;
Begin = +
Ifstr(i) $(!NTN_InstallMode) == deinstall
Ifstr(i) $(AsigProductKeyName) == $(!NTN_RegBase)
Debug-Output "ASIG: Cannot remove asig driver by itself."
Shell $(UtilityInf),RegistryErrorString,REF_COUNT_NOT_ZERO
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ASIG: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
Ifstr(i) $(AsigProductKeyName) == $(!NTN_RegBase)
set StartLabel = asigUpgradeSoftware
endif
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set CommonStatus = STATUS_REBOOT
set StartLabel = configureadapter
;
; Cannot configure the software component.
Ifstr(i) $(AsigProductKeyName) == $(!NTN_RegBase)
set StartLabel = asigconfigureadapter
endif
;
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "IP5515: Cannot configure the Ip5515 ATM SVC driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "IP5515: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
set CLUnitNumber = 0
set LesNumber = 0
set CLEnabled = 1
endif
; Setup the default values.
;
set MTUValue = *($(MTUList), 1)
set INTERRUPTValue = *($(INTERRUPTList), 1)
; set BUSValue = *($(BUSList), 5)
Debug-Output "------------------------------------------"
Debug-Output "IP5515: MTUValue (default): "$(MTUValue)
Debug-Output "IP5515: INTERRUPTValue (default): "$(INTERRUPTValue)
; Debug-Output "IP5515: BUSValue (default): "$(BUSValue)
Debug-Output "IP5515: StartLabel: "$(StartLabel)
;
; asig default value
;
set RadioDefault = 2
set RadioIn = {$(RadioDefault)}
set useILMI = 1
set uniRunMode = 1
set debugUME = 0
set debugQ93B = 0
set from = $(fatal)
set to = $(fatal)
;
; Setup the default values.
;
set APIValue = *($(APIList), 1)
Debug-Output "------------------------------------------"
Debug-Output "ASIG: APIValue (default): "$(APIValue)
Debug-Output "ASIG: StartLabel: "$(StartLabel)
Goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
;
; First, check whether the same version of the software exists
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
;
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
;
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
;
; Cannot Install the same software again
;
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "IP5515: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Debug-Output "IP5515: Add adapter CLUnitNumber: "$(CLUnitNumber)
ifint $(CLUnitNumber) == 0
;
; Add a new adapter card?
;
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "IP5515: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
endif
set OldVersionExisted = $(TRUE)
endif
endif
goto adaptersetup
;
; install Asig
;
asiginstalladapter = +
ifint $(AsigOldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto asiginstallproduct
endif
endif
OpenRegKey $(!REG_H_LOCAL) "" $(AsigProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
; Shell $(UtilityInf), VerExistedDlg, $(AsigProductSoftwareTitle),+
; $(ProductVersion)
; ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error: cannot get an error string."
; goto ShellCodeError
; endif
goto end
endif
CloseRegKey $(KeyProduct)
goto asiginstallproduct
asigconfigureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "ASIG: Configuration cannot find component product key"
goto fatalregistry
Endif
Endif
;
; Get the other parameters; they're attached to the service parameters key
;
Debug-Output "ASIG INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ASIG INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "ASIG INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
;
; We don't need the services key, so close it.
;
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set AsigOldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
;
; Get the old values
;
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "debugAPI"
set APIValueIndex = $(ValueData)
endif
EndForListDo
Debug-Output "ASIG: APIValueIndex (from reg): "$(APIValueIndex)
set APIValue = *($(APIList), ~($(APIValues),$(APIValueIndex)))
ifstr(i) $(APIValue) == ""
set APIValue = *($(APIList), 1)
endif
Debug-Output "ASIG: APIValue (from reg): "$(APIValue)
asiginstallproduct = +
; read-syms AsigFileDependentDlg$(!STF_LANGUAGE)
;
; ui start "InputDlg"
;
; ifstr(i) $(DLGEVENT) == "CONTINUE"
; set APIValueIndex = $(C1Out)
;
; Debug-Output "ASIG: (after cont) APIValueIndex: "$(APIValueIndex)
; ui pop 1
;
; else-ifstr(i) $(DLGEVENT) == "BACK"
; set CommonStatus = STATUS_USERCANCEL
; Debug-Output "Action: exit. Bye."
; ui pop 1
; goto end
;
; else
; Debug-Output "Action: unknown. Bye."
; ui pop 1
; goto end
;
; endif
StartWait
ifint $(AsigOldVersionExisted) == $(FALSE)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-OptionAsig"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
set OEM_ABANDON_ON = TRUE
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(AsigProductSoftwareName), +
$(AsigProductSoftwareName), +
$(AsigProductSoftwareDisplayName), $(STF_CONTEXTINFNAME), +
$(AsigProductSoftwareImagePath), "kernel", "TDI", {}, "",+
$(NetEventDLL)
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalRegistry
endif
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
set KeyParameters = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(AsigSoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(AsigProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(AsigProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(AsigProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
set RegistryErrorIndex = $($R0)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
CloseRegKey $(KeyParameters)
goto fatalRegistry
endif
set NewValueList = {{type ,$(NoTitle),$(!REG_VT_SZ),$(AsigNetRuleSoftwareType)}, +
{use ,$(NoTitle),$(!REG_VT_SZ),$(AsigNetRuleSoftwareUse)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(AsigNetRuleSoftwareClass)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(AsigNetRuleSoftwareBindForm)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(AsigOption)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
set RegistryErrorIndex = $($R0)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
CloseRegKey $(KeyParameters)
goto fatalRegistry
endif
Set NewValueList = {{NbProvider,$(NoTitle),$(!REG_VT_SZ),"_nb"}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
goto fatalRegistry
endif
set APIValue = *($(APIValues), ~($(APIList),$(APIValueIndex)))
Debug-Output "ASIG: APIValue (final): "$(APIValue)
Set NewValueList = {{debugAPI,$(NoTitle),$(!REG_VT_DWORD),$(APIValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
goto fatalRegistry
endif
Set NewValueList = {{useILMI,$(NoTitle),$(!REG_VT_DWORD),$(useILMI)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
goto fatalRegistry
endif
Set NewValueList = {{uniRunMode,$(NoTitle),$(!REG_VT_DWORD),$(uniRunMode)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
goto fatalRegistry
endif
Set NewValueList = {{debugUME,$(NoTitle),$(!REG_VT_DWORD),$(debugUME)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
goto fatalRegistry
endif
Set NewValueList = {{debugQ93B,$(NoTitle),$(!REG_VT_DWORD),$(debugQ93B)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
goto fatalRegistry
endif
CreateRegKey $(SoftServiceKey) {"Performance",$(NoTitle),GenericClass} "" +
$(MAXIMUM_ALLOWED) "" KeyPerformance
set NewValueList = {{Library,$(NoTitle),$(!REG_VT_SZ),"Perfctrs.dll"},+
{Open,$(NoTitle),$(!REG_VT_SZ),"OpenNbfPerformanceData"},+
{Collect,$(NoTitle),$(!REG_VT_SZ),"CollectNbfPerformanceData"},+
{Close,$(NoTitle),$(!REG_VT_SZ),"CloseNbfPerformanceData"}}
Shell $(UtilityInf), AddValueList, $(KeyPerformance), $(NewValueList)
set RegistryErrorIndex = $($R0)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
CloseRegKey $(KeyParameters)
goto fatalRegistry
endif
CloseRegKey $(KeyPerformance)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
endif
goto asigwriteparameters
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
; Get the current values of all the parameters
;
configureadapter = +
Debug-Output "IP5515: Cannot configure the Ip5515 ATM SVC driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "IP5515: CONFIG: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
; configure code below never get use
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "IP5515: Configuration cannot find component product key"
goto fatalregistry
Endif
Endif
;
; Get the other parameters; they're attached to the service parameters key
;
Debug-Output "IP5515 INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "IP5515 INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
;
; We don't need the services key, so close it.
;
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set AsigOldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
;
; Get the old values
;
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "ClientMfs"
set MTUValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set INTERRUPTValueIndex = $(ValueData)
; else-ifstr(i) $(ValueName) == "BusType"
; set BUSValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "ClientNumber"
set CLUnitNumber = $(ValueData)
else-ifstr(i) $(ValueName) == "MaxMTU"
set MaxMTU = $(ValueData)
endif
EndForListDo
Debug-Output "IP5515: MTUValueIndex (from reg): "$(MTUValueIndex)
Debug-Output "IP5515: INTERRUPTValueIndex (from reg): "$(INTERRUPTValueIndex)
; Debug-Output "IP5515: BUSValueIndex (from reg): "$(BUSValueIndex)
Debug-Output "IP5515: CLUnitNumber (from reg): "$(CLUnitNumber)
set MTUValue = *($(MTUList), ~($(MTUValues),$(MTUValueIndex)))
ifstr(i) $(MTUValue) == ""
set MTUValue = *($(MTUList), 1)
endif
Debug-Output "IP5515: MTUValue (from reg): "$(MTUValue)
set INTERRUPTValue = *($(INTERRUPTList), ~($(INTERRUPTValues),$(INTERRUPTValueIndex)))
ifstr(i) $(INTERRUPTValue) == ""
set INTERRUPTValue = *($(INTERRUPTList), 1)
endif
Debug-Output "IP5515: INTERRUPTValue (from reg): "$(INTERRUPTValue)
; set BUSValue = *($(BUSList), ~($(BUSValues),$(BUSValueIndex)))
; ifstr(i) $(BUSValue) == ""
; set BUSValue = *($(BUSList), 1)
; endif
;
; Debug-Output "IP5515: BUSValue (from reg): "$(BUSValue)
;
; Put up the adapter configuration dialog.
;
adaptersetup = +
Set from = adapteroptions
adapteroptions = +
ifint $(CLUnitNumber) == 0
; read-syms FileDependentDlg$(!STF_LANGUAGE)
;
; ui start "InputDlg"
;
; ifstr(i) $(DLGEVENT) == "CONTINUE"
; set MTUValueIndex = $(Combo1Out)
; Debug-Output "IP5515: (after cont) MTUValueIndex: "$(MTUValueIndex)
; set INTERRUPTValueIndex = $(Combo2Out)
; Debug-Output "IP5515: (after cont) INTERRUPTValueIndex: "$(INTERRUPTValueIndex)
; set BUSValueIndex = $(Combo3Out)
; Debug-Output "IP5515: (after cont) BUSValueIndex: "$(BUSValueIndex)
;
; ui pop 1
;
; else-ifstr(i) $(DLGEVENT) == "BACK"
; set CommonStatus = STATUS_USERCANCEL
; Debug-Output "Action: exit. Bye."
; ui pop 1
; goto end
;
; else
; Debug-Output "Action: unknown. Bye."
; ui pop 1
; goto end
;
; endif
else
ifstr(i) $(!NTN_InstallMode) == configure
Debug-Output "IP5515: Cannot configure Client: "$(CLUnitNumber)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "IP5515: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
endif
;
; If installing, go create the necessary keys;
; if configuring, they're already open.
;
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
;
; Add Software Component
;
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Debug-Output "IP5515: DoCopy Yes"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "IP5515: DoCopy shell error"
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Debug-Output "IP5515: DoCopy status failed"
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Debug-Output "IP5515: DoCopy user cancel"
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
Debug-Output "IP5515: DoCopy error cannot copy file"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
; At this point:
; $R1 contains the product version key handle;
; $R2 contains the NetRules subkey handle;
; $R3 contains the new Services key handle; and
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
;
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
;
; Create the HARDWARE\Netcard region and its corresponding service
;
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
Debug-Output "IP5515: set OEM_ABANDON_OPTION=\Microsoft\Windows NT\curreentVersion\NetCards"$($R4)
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
;
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
ifint $(CLUnitNumber) == $(ClientMaxUnit)
set DisplayTitleString = $(Client1577String)
else
set-add DisplayClientNumber = $(CLUnitNumber),1
set DisplayTitleString = $(LaneClientString)$(DisplayClientNumber)
endif
; {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)$(CLUnitNumber)},+
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(DisplayTitleString)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
;
; REQUIRED: $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
ifstr(i) $(!NTN_InstallMode) == install
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase) $(!REG_KEY_CREATE_SUB_KEY) KeyProduct
ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find services under CurrentControlSet"
goto fatalregistry
endif
OpenRegKey $(KeyProduct) "" $(ProductSoftwareName) $(!REG_KEY_SET_VALUE) IPHandle
ifstr $(IPHandle) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find driver entry under Services"
goto fatalregistry
endif
OpenRegKey $(IPHandle) "" "Parameters" $(!REG_KEY_ALL_ACCESS) ParamHandle
ifstr $(ParamHandle) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find driver parameter entry under Services"
goto fatalregistry
endif
ifint $(OldVersionExisted) == $(FALSE)
set LinkNumber = 0
set NumberOfAdapter = 1
else
ifint $(CLUnitNumber) == 0
GetRegValue $(ParamHandle),"NumberOfAdapter", NumberOfAdapterInfo
set NumberOfAdapter = *($(NumberOfAdapterInfo), 4)
Debug-Output "OLD NumberOfAdapter "$(NumberOfAdapter)
set LinkNumber = $(NumberOfAdapter)
set-add NumberOfAdapter = $(NumberOfAdapter),1
endif
endif
ifint $(CLUnitNumber) == 0
ifstr(i) $(!NTN_InstallMode) == install
Set NewValueList = {{NumberOfAdapter,$(NoTitle),$(!REG_VT_DWORD),$(NumberOfAdapter)}}
Shell $(UtilityInf), AddValueList, $(ParamHandle), $(NewValueList)
endif
CloseRegKey $(ParamHandle)
CloseRegKey $(IPHandle)
CloseRegKey $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "IP5515: ShellCode error add NumberOfAdapter entry."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
else
CloseRegKey $(ParamHandle)
CloseRegKey $(IPHandle)
CloseRegKey $(KeyProduct)
endif
endif
;
; ControlSet/Services
; PCI Bus Type = 5
;
ifint $(CLUnitNumber) == 0
set MTUValue = *($(MTUValues), ~($(MTUList),$(MTUValueIndex)))
set MaxMtu = $(MTUValue)
Debug-Output "IP5515: MTUValue (final): "$(MTUValue)
set INTERRUPTValue = *($(INTERRUPTValues), ~($(INTERRUPTList),$(INTERRUPTValueIndex)))
Debug-Output "IP5515: INTERRUPTValue (final): "$(INTERRUPTValue)
; set BUSValue = *($(BUSValues), ~($(BUSList),$(BUSValueIndex)))
; Debug-Output "IP5515: BUSValue (final): "$(BUSValue)
;
;LeDebug = 127(0x7f) for all LANE debug ON
; = 123 (0x7b) for all LANE debug ON except LE_READY_DBG
;
ifstr(i) $(!NTN_InstallMode) == install
Set NewValueList = {{NetworkMedium,$(NoTitle),$(!REG_VT_DWORD),3)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+
; {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BUSValue)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),5},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),255},+
; {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(INTERRUPTValue)},+
{DriverState,$(NoTitle),$(!REG_VT_DWORD),0},+
{LinkNumber,$(NoTitle),$(!REG_VT_DWORD),$(LinkNumber)},+
{ClientNumber,$(NoTitle),$(!REG_VT_DWORD),$(CLUnitNumber)},+
{LeDebug,$(NoTitle),$(!REG_VT_DWORD),0},+
{PortChangeDetect,$(NoTitle),$(!REG_VT_DWORD),1},+
{AddressRegistration,$(NoTitle),$(!REG_VT_DWORD),1},+
{RegDiffNetPrefix,$(NoTitle),$(!REG_VT_DWORD),1},+
{SUNIMode,$(NoTitle),$(!REG_VT_DWORD),0},+
{UniRev,$(NoTitle),$(!REG_VT_DWORD),0},+
{FirstEnabledClient,$(NoTitle),$(!REG_VT_DWORD),0},+
{MaxMTU,$(NoTitle),$(!REG_VT_DWORD),1}}
else
; configure
Set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(INTERRUPTValue)},+
{MaxMTU,$(NoTitle),$(!REG_VT_DWORD),$(MaxMTU)}}
; {MaxMTU,$(NoTitle),$(!REG_VT_DWORD),$(MaxMTU)},+
; {ClientMfs,$(NoTitle),$(!REG_VT_DWORD),$(MTUValue)}}
endif
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
; Client != 0
else
Set NewValueList = {{NetworkMedium,$(NoTitle),$(!REG_VT_DWORD),3)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+
; {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BUSValue)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),5},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),255},+
; {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(INTERRUPTValue)},+
{DriverState,$(NoTitle),$(!REG_VT_DWORD),0},+
{LinkNumber,$(NoTitle),$(!REG_VT_DWORD),$(LinkNumber)},+
{ClientNumber,$(NoTitle),$(!REG_VT_DWORD),$(CLUnitNumber)},+
{LeDebug,$(NoTitle),$(!REG_VT_DWORD),0},+
{PortChangeDetect,$(NoTitle),$(!REG_VT_DWORD),1},+
{AddressRegistration,$(NoTitle),$(!REG_VT_DWORD),1},+
{RegDiffNetPrefix,$(NoTitle),$(!REG_VT_DWORD),1},+
{SUNIMode,$(NoTitle),$(!REG_VT_DWORD),0},+
{MaxMTU,$(NoTitle),$(!REG_VT_DWORD),1},+
{FirstEnabledClient,$(NoTitle),$(!REG_VT_DWORD),0},+
{UniRev,$(NoTitle),$(!REG_VT_DWORD),0}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
endif
ifstr(i) $(!NTN_InstallMode) == install
CreateRegKey $(KeyParameters) {"Tcpip",$(NoTitle),GenericClass} "" +
$(MAXIMUM_ALLOWED) "" KeyTcpip
Set IPString = $(IPAddressString)$(CLUnitNumber)$(NumberOfAdapter)
Debug-Output "SSSSSSSSSSSSSSSSSSSSSSSSSS"
Debug-Output "IP5515: IPAddressString "$(IPString)
Debug-Output "IP5515: IPAddressString "$($(IPString))
Debug-Output "SSSSSSSSSSSSSSSSSSSSSSSSSS"
; Set NewValueList = {{IPAddress,$(NoTitle),$(!REG_VT_MULTI_SZ),"$(IPAddressString)$(CLUnitNumber)},+
Set NewValueList = {{IPAddress,$(NoTitle),$(!REG_VT_MULTI_SZ),$($(IPString))},+
{DefaultGateway,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NoEntry)},+
{LLInterface,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NoEntry)},+
{EnableDHCP,$(NoTitle),$(!REG_VT_DWORD),0},+
{UseZeroBroadcast,$(NoTitle),$(!REG_VT_DWORD),0},+
{SubnetMask,$(NoTitle),$(!REG_VT_MULTI_SZ),$(IPMask)}}
Shell $(UtilityInf), AddValueList, $(KeyTcpip), $(NewValueList)
set RegistryErrorIndex = $($R0)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(KeyTcpip)
CloseRegKey $(KeyParameters)
goto fatalRegistry
endif
CloseRegKey $(KeyTcpip)
endif ; ifstr(i) $(!NTN_InstallMode) == install
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "IP5515: ShellCode error add value list."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
ifstr(i) $(!NTN_InstallMode) == install
set-add CLUnitNumber = $(CLUnitNumber),1
set CLEnabled = $(FALSE)
ifint $(CLUnitNumber) <= $(ClientMaxUnit)
Debug-Output "IP5515: CLUnitNumber: "$(CLUnitNumber)
goto installadapter
endif
endif
ifint $(AsigOldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
; goto asigconfigureadapter
goto successful
else
goto asiginstalladapter
endif
endif
goto asiginstalladapter
asigwriteparameters = +
set APIValue = *($(APIValues), ~($(APIList),$(APIValueIndex)))
Debug-Output "ASIG: APIValue (config final): "$(APIValue)
ifint $(AsigOldVersionExisted) == $(TRUE)
OpenRegKey $(!REG_H_LOCAL) "" $(AsigParamKeyName) $(MAXIMUM_ALLOWED) KeyParameters
endif
set NewValueList = {{debugAPI,$(NoTitle),$(!REG_VT_DWORD),$(APIValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(KeyParameters)
goto fatalRegistry
endif
CloseRegKey $(KeyParameters)
EndWait
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
Debug-Output "REMOVE: NTN_RegBase: "$(!NTN_RegBase)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "IP5515: REMOVE cannot find component product key"
goto fatalregistry
Endif
Endif
Debug-Output "IP5515 INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "IP5515 INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
;
; We don't need the services key, so close it.
;
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
;
; Get the old values
;
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "ClientNumber"
set CLUNumber = $(ValueData)
endif
EndForListDo
Debug-Output "IP5515: REMOVE: CLUNumber (from reg): "$(CLUNumber)
ifint $(CLUNumber) == 0
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase) $(!REG_KEY_CREATE_SUB_KEY) KeyProduct
ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "REMOVE: Cannot find services under CurrentControlSet"
goto fatalregistry
endif
OpenRegKey $(KeyProduct) "" $(ProductSoftwareName) $(!REG_KEY_SET_VALUE) IPHandle
ifstr $(IPHandle) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "REMOVE: Cannot find driver entry under Services"
goto fatalregistry
endif
OpenRegKey $(IPHandle) "" "Parameters" $(!REG_KEY_ALL_ACCESS) ParamHandle
ifstr $(ParamHandle) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "REMOVE: Cannot find driver parameter entry under Services"
goto fatalregistry
endif
GetRegValue $(ParamHandle),"NumberOfAdapter", NumberOfAdapterInfo
set NumberOfAdapter = *($(NumberOfAdapterInfo), 4)
Debug-Output "REMOVE: OLD NumberOfAdapter "$(NumberOfAdapter)
set-sub NumberOfAdapter = $(NumberOfAdapter),1
Set NewValueList = {{NumberOfAdapter,$(NoTitle),$(!REG_VT_DWORD),$(NumberOfAdapter)}}
Shell $(UtilityInf), AddValueList, $(ParamHandle), $(NewValueList)
CloseRegKey $(ParamHandle)
CloseRegKey $(IPHandle)
CloseRegKey $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "IP5515: ShellCode error subtract NumberOfAdapter entry."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Remove value list"
goto fatalregistry
endif
set RemoveCount = 0
Split-String $(!NTN_RegBase), "\", CardInfo
set CL_NetCardNum = *($(CardInfo),11)
set CL_RegBase = $(!NTN_RegBase)
clientremove = +
Debug-Output "REMOVE: CL_RegBase: "$(CL_RegBase)
set MNetCard = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards"
OpenRegKey $(!REG_H_LOCAL) "" $(MNetCard) $(MAXIMUM_ALLOWED) CardHandle
ifstr $(CardHandle) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "REMOVE: Cannot find driver CardHandle entry under NetworkCards"
goto fatalregistry
endif
OpenRegKey $(CardHandle) "" $(CL_NetCardNum) $(!REG_KEY_READ) NumHandle
ifstr $(NumHandle) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "REMOVE: Cannot find driver CardNum entry under NetworkCards"
goto fatalregistry
endif
GetRegValue $(NumHandle),"Description", CardDescInfo
set CardDesc = *($(CardDescInfo),4)
Debug-Output "REMOVE: CardDesc: "$(CardDesc)
CloseRegKey $(NumHandle)
CloseRegKey $(CardHandle)
Ifstr(i) $(CardDesc) == $(ProductHardware$(Option)Description)
Ifstr(i) $(ProductKeyName) == $(CL_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(CL_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
ifint $(RemoveCount) < $(ClientMaxUnit)
set-add RemoveCount = $(RemoveCount),1
set-add CL_NetCardNum = $(CL_NetCardNum),1
Debug-Output "REMOVE: CL_NetCardNum: "$(CL_NetCardNum)
set CL_RegBase = *($(CardInfo),1)*($(CardInfo),2)*($(CardInfo),3)*($(CardInfo),4)*($(CardInfo),5)*($(CardInfo),6)*($(CardInfo),7)*($(CardInfo),8)*($(CardInfo),9)$(Slash)$(CL_NetCardNum)
Debug-Output "REMOVE: SET CL_RegBase: "$(CL_RegBase)
goto clientremove
endif
else
Debug-Output "REMOVE: SKIP: cardnum: "$(CL_NetCardNum)
set-add CL_NetCardNum = $(CL_NetCardNum),1
set CL_RegBase = *($(CardInfo),1)*($(CardInfo),2)*($(CardInfo),3)*($(CardInfo),4)*($(CardInfo),5)*($(CardInfo),6)*($(CardInfo),7)*($(CardInfo),8)*($(CardInfo),9)$(Slash)$(CL_NetCardNum)
goto clientremove
endif
Debug-Output "REMOVE: Leccfg NumberOfAdapter: "$(NumberOfAdapter)
ifint $(NumberOfAdapter) == 0
AddFileToDeleteList $(!STF_WINDOWSSYSPATH)"\cellview.cpl"
endif
goto asigremoveadapter
else
; CLIENT != 0
Debug-Output "Unable to remove client "$(CLUNumber)
Shell $(UtilityInf) RegistryErrorString "UNABLE_REMOVE_CONFIGURE_SERVICE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
;
; remove Asig
;
asigremoveadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase) $(!REG_KEY_ALL_ACCESS) AsigKeyProduct
; OpenRegKey $(AsigKeyProduct) "" $(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) ProductHandle
OpenRegKey $(AsigKeyProduct) "" $(ProductHardwareName) $(MAXIMUM_ALLOWED) ProductHandle
ifstr $(ProductHandle) == $(KeyNull)
Debug-Output "NULL Ip5515 handle, remove Asig Handle"
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(AsigProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Debug-Output "NOT NULL IP5515 handle "
GetRegValue $(ProductHandle),"DeleteFlag", DeleteFlagInfo
set DeleteFlag = *($(DeleteFlagInfo), 4)
ifint $(DeleteFlag) == 1
Debug-Output "DeleteFlag == 1"
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(AsigProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Debug-Output "DeleteFlag != 1"
endif
CloseRegKey $(ProductHandle)
endif
CloseRegKey $(AsigKeyProduct)
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
;
; First determine whether we want to do upgrade or update for software
; or hardware component. Then we will determine whether the Mode is
; update or upgrade.
;
; If the same version of the product existed in the registry, we do
; update. Otherwise, we will do a upgrade
;
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Upgrade software component
;
; see whether the same version exist or not
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
Debug-Output "Upgrade: Version: "$(Version)
;
; Update the binaries
;
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
Debug-Output "Upgrade: Filename: "$(!UG_Filename)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
; Upgrade the version number
;
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
;
; do nothing for update
;
ifint $(Version) != $(ProductVersion)
Debug-Output "Upgrade: Version: "$(Version)
Debug-Output "Upgrade: ProductVersion: "$(ProductVersion)
;
; If the major version number is not the same,
; it is major upgrade. So let Upgrade the product
;
;
; make other upgrade change if necessary
;
endif
CloseRegKey $(KeyProduct)
else
;
; Cannot Open software key, goto ERROR
;
goto fatalregistry
endif
else
Debug-Output "IP5515: Do not support hardware update."
Shell $(UtilityInf),RegistryErrorString,OPERATION_UNIMPLEMENTED
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "IP5515: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
; the following code is not execute. DO NOT support hardware
; upgrade for now.
;
; upgrade/update hardware component
; There is no different between upgrade and update for hardware
; component
;
; 3. Change the service section of the hardware. i.e.,
; ParameterName change, value change, etc.
;
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
;
; Get the ServiceKey to change the Start value
; or Type value. Or open Parameters key to
; change the hardware parameters if necessary.
;
CloseRegKey $(ServiceKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
endif
goto asigUpgradeSoftware
asigUpgradeSoftware = +
; ifstr(i) $(AsigProductKeyName) == $(!NTN_RegBase)
OpenRegKey $(!REG_H_LOCAL) "" $(AsigProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
Debug-Output "AsigUpgrade: Filename: "$(!UG_Filename)
ifstr(i) $(!UG_Filename) != ""
install "Install-UpdateAsig"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
Debug-Output "AsigUpgrade: Version: "$(Version)
Debug-Output "AsigUpgrade: ProductVersion: "$(ProductVersion)
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
ifint $(Version) != $(ProductVersion)
Debug-Output "AsigUpgrade: Version: "$(Version)
Debug-Output "AsigUpgrade: ProductVersion: "$(ProductVersion)
endif
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
; endif
goto end
;
; End of Upgrade Software
;
;
; Escape hatches
;
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;
; warning display
;
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
;
; non fatal error display
;
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
;
; Registry is broken
;
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
;
; fatal error display
;
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
;
; Shelling error
;
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
;
; if OEM_ABANDON_ON == TRUE, then remove the registry entries
;
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
;*******************************************************
; INSTALL SECTIONS
;*******************************************************
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
Debug-Output "IP5515: Install-Option: Option: "$(Option)
Debug-Output "IP5515: Install-Option: SrcDir: "$(SrcDir)
Debug-Output "IP5515: Install-Option: STF_WINDOWSSYSPATH: "$(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-AppDll $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-CvConf $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers\etc\atm
endif
ifstr(i) $(DoCopy) == "YES"
;
; Copy files in the copy list
;
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-OptionAsig]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
Debug-Output "ASIG: Install-Option: Option: "$(AsigOption)
Debug-Output "ASIG: Install-Option: SrcDir: "$(SrcDir)
Debug-Output "ASIG: Install-Option: STF_WINDOWSSYSPATH: "$(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-$(AsigOption) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-AppDll $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-UpdateAsig]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-$(AsigOption) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
;
;
[Source Media Descriptions]
1 = "Interphase PCI ATM Driver Disk #1" , TAGFILE = disk1
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-Ip5515]
;1, ip5515si.sys, SIZE=47616
1, ip5515si.sys
[Files-ASIG]
1,asig.sys
[Files-AppDll]
1, CTL3D32.DLL
1, cellview.cpl
[Files-CvConf]
1, cvconf
[LanguagesSupported]
ENG
[OptionsTextENG]
IP5515 = "Interphase PCI ATM Adapter"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "Interphase ATM Adapter Setup for Client 0"
ProductSoftwareDescription = "Interphase PCI ATM Driver"
ProductHardwareIP5515Description = "Interphase ATM Adapter"
ProductSoftwareTitle = "Interphase PCI ATM Driver"
;ProductHardwareIP5515Title = "Interphase ATM Adapter Client "
ProductHardwareIP5515Title = "Interphase ATM "
DisplayTitleString = ""
DisplayClientNumber = 1
LaneClientString = "Interphase ATM LANE Client "
Client1577String = "Interphase ATM 1577 Client/Server"
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
AsigProductSoftwareDescription = "Interphase ATM Signaling Transport"
AsigProductSoftwareDisplayName = "Interphase ATM Signaling Transport"
AsigProductSoftwareTitle = "Interphase ATM Signaling Transport"
AsigFunctionTitle = "Interphase ATM Signaling Transport"
MTUList = ^(MTUChoices, 1)
MTUValues = ^(MTUChoices, 2)
INTERRUPTList = ^(INTERRUPTChoices, 1)
INTERRUPTValues = ^(INTERRUPTChoices, 2)
;BUSList = ^(BUSChoices, 1)
;BUSValues = ^(BUSChoices, 2)
; Asig choice
APIList = ^(APIChoices, 1)
APIValues = ^(APIChoices, 2)
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
APIDisplayList = { "OFF", "ON"}
[FileDependentDlgENG]
DlgText = "Please select values for the following fields:"
Combo1Label = "&MTU Size:"
Combo2Label = "&Interrupt Level:"
;Combo3Label = "&Bus Type:"
DlgType = "MultiCombo"
;DlgTemplate = "WD"
;DlgTemplate = "SINGLE_COMBO"
;DlgTemplate = "UBNDIS"
DlgTemplate = "NE2000"
Label1 = $(Combo1Label)
Label2 = $(Combo2Label)
;Label3 = $(Combo3Label)
Caption = $(FunctionTitle)
Combo1List = $(MTUList)
Combo1Out = $(MTUValue)
Combo2List = $(INTERRUPTList)
Combo2Out = $(INTERRUPTValue)
;Combo3List = $(BUSList)
;Combo3Out = $(BUSValue)
;ComboListItemsIn = {Combo1List, Combo2List, Combo3List}
;ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}
ComboListItemsIn = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO}
HelpContext =
[MTUChoices]
MTU_1 = "1514",1
MTU_2 = "4542",2
MTU_3 = "9232",3
[INTERRUPTChoices]
INTERRUPT_FF = "Auto Detect",255
INTERRUPT_5 = "5",5
INTERRUPT_9 = "9",9
INTERRUPT_10 = "10",10
INTERRUPT_11 = "11",11
INTERRUPT_12 = "12",12
INTERRUPT_13 = "13",13
INTERRUPT_14 = "14",14
INTERRUPT_15 = "15",15
;[BUSChoices]
;BUS_5 = "PCI",5
;BUS_3 = "MCA",3
;
; Asig Choices
;
[AsigFileDependentDlgENG]
DlgText = "Please select values for the following fields:"
;C1Label = "&debugAPI:"
Combo1Label = "&debugAPI:"
;DlgType = "MultiCombo"
DlgTemplate = "SINGLE_COMBO"
;DlgTemplate = "WD"
Caption = $(AsigFunctionTitle)
C1List = $(APIDisplayList)
C1Out = $(APIValue)
ComboListItemsIn = {C1List}
ComboListItemsOut = {C1Out}
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO}
;HelpContext =
HelpContext = $(!IDH_DB_OEMNXPNB_INS)
[APIChoices]
API_0 = "OFF",0
API_1 = "ON",1
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.