NOTE: This directory contains only an OS/2 driver. This driver must be used with the OS\2 requester to establish networking operations. 802.2 Default Frame Type Novell's Ethernet ODI workstation drivers default to the 802.2 frame type. Older Ethernet drivers default to the 802.3 frame type. Only the IPX protocol can use the 802.3 frame type. The change to 802.2 allows compatability with, and greater connectivity to future products. Driver frame types can be changed from default to another frame type by using the FRAME command in the workstation NET.CFG file with a valid "frame type" parameter. Valid "frame types" include: ETHERNET_802.2 ETHERNET_802.3 ETHERNET_II ETHERNET_SNAP When using the OS/2 ODI workstation driver (802.3 frame type) found on this diskette, make sure that your server uses the same frame type. The server LAN driver frame type can be configured by using the FRAME = "frame type" parameter when loading and binding the server driver. For more information on NET.CFG parameters, see "NetWare Workstation for DOS" or "ODI for DOS User's Guide".Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.