otr Token-ring driver for UnixWare 7. Supported adapters: OC-3136 Olicom Token-Ring PCI 16/4 Adapter OC-3137 Olicom Token_RIng PCI/II 16/4 Adapter RF-3140 Olicom RapidFire 3140 Token-Ring 16/4 PCI Adapter RF-3141 Olicom RapidFire 3141 Token-Ring 16/4 PCI Fiber Adapter RF-3540 Olicom RapidFire 3540 HSTR 100 PCI Adapter Configurable options: Line Speed: AUTO-detect the adapter will detect the speed of the ring. 4Mbps 16Mbps 100Mbps for RF-3540 only. Duplex mode: AUTO-detect the adapter will detect the duplex mode from the attachment. Full-duplex The adapter will join in full duplex (TXI). Half-duplex The adapter will join in half duplex (TKP): Macaddress: A blank line denotes the factory address. Any configured address must be a valid local administered address, i.e. it must start with 4000. Frame size: 14..18000 If attached to 4Mbps ring, the framesize is reduced, if necessary, to 4500. Do not configure this higher that any switch in the network. The driver does not support promiscuous mode. Installation from the otr301.pkg file: pkgadd -d otr301.pkg and answer yes when prompted to install the package.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.