************************************************************
************************************************************
*
* Intel® INF Installation Utility
* Installation Read Me
*
* NOTE: This document refers to systems containing the
* following Intel chipsets:
* Intel® 810 Chipset
* Intel® 820 Chipset
*
* Intel® 430TX PCIset
* Intel® 440BX AGPset
* Intel® 440DX AGPset
* Intel® 440EX AGPset
* Intel® 440GX AGPset
* Intel® 440LX AGPset
* Intel® 440ZX AGPset
*
* This document makes references to unannounced products
* being developed by Intel. There are some restrictions
* on how these products may be used, and what information
* can be disclosed to others. Please read the Disclaimer
* section at the bottom of this document, and contact your
* Intel field representative if you would like more
* information.
*
************************************************************
************************************************************
************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************
This document contains the following sections:
1. Overview
2. Contents of the Distribution Package
3. System Requirements
4. Installing the Software
5. Verifying Installation of the Software
6. Identifying the Software Version Number
7. Troubleshooting
************************************************************
* 1. OVERVIEW
************************************************************
The Intel® INF Installation Utility installs to
the target system the Windows* INF files that outline to
the operating system how the chipset components shall be
configured. This is needed for proper functionality of the
following features:
- Core PCI and ISAPNP Services
- AGP Support
- IDE/ATA33/ATA66 Storage Support
- USB Support
- Identification of Intel Chipset Components in
Device Manager
************************************************************
* 2. CONTENTS OF THE DISTRIBUTION PACKAGE
************************************************************
The Intel® INF Installation Utility package contains the
following items:
File
----
INFINST.ZIP
README.TXT
RELNOTES.TXT
VERSION.TXT
The version of the software included in the distribution
package is specified in the file, VERSION.TXT.
After installation, the one or more of the following files
are copied to the <INF Installation Directory> (the target
directory selected during installation - refer to Section 3
for more information).
*** NOTE: Only the files that reference the currently
detected devices are copied to the system.
After installation on a Windows 95* or Windows 98* system,
one or more of the following INF files are copied
to the <Windows>\INF directory:
File
----
810.INF
820.INF
ICHx.INF
ICHxIDE.INF
ICHxUSB.INF
IHOST.INF
IFWH.INF
PIIXXIDE.INF
PIIXXUSB.INF
PIIX4.INF
*** NOTE: Only the files that reference the currently
detected devices are copied to the system.
After installation on a Windows 98* system, one or more of the
following Windows 98 digital signature Catalog files are
copied to the <Windows>\CATROOT directory:
File
----
810.CAT
ICHx.CAT
ICHxIDE.CAT
ICHxUSB.CAT
IFWH.CAT
*** NOTE: Only the files that reference the currently
detected devices are copied to the system.
************************************************************
* 3. SYSTEM REQUIREMENTS
************************************************************
1. The system must contain one of the following Intel
chipsets:
Intel® 810 Chipset
Intel® 820 Chipset
Intel® 430TX PCIset
Intel® 440BX AGPset
Intel® 440DX AGPset
Intel® 440EX AGPset
Intel® 440GX AGPset
Intel® 440LX AGPset
Intel® 440ZX AGPset
2. The one of the following operating systems must be
installed on the system:
Windows 95 4.00.950 (Original Release)
Windows 95 4.00.950a (OSR1)
Windows 95 4.00.950b (OSR2 without USB Supplement)
Windows 95 4.00.950b (OSR2.1 with USB Supplement)
Windows 95 4.00.950c (OSR2.5 with or without USB
Supplement)
Windows 98 4.10.1998 (Original Release)
3. This software has been designed solely for systems
running Windows 95 or Windows 98 with one of the
above Intel chipsets.
4. It is recommended that the kit software be installed on
systems with at least 32MB of system memory.
5. It is recommended that there is sufficient hard disk
space in the <TEMP> directory (typically
C:\WINDOWS\TEMP) on the system to install this software.
Please check with your system provider to determine which
operating system and Intel chipset are used in your system.
************************************************************
* 4. INSTALLING THE SOFTWARE
************************************************************
1. Check the System Requirements. Windows 95 or Windows 98
must be fully installed and running on the system prior
to running this software.
2. Close any running applications. You may experience some
difficulties if you don't do this.
3. Un-zip the InstallShield* installation program files
into a temporary directory.
4. Run the InstallShield installation program, SETUP.EXE.
5. You will be prompted to agree to the license agreement.
If you do not agree, the Installer will exit prior to
extracting any files.
6. The README.TXT and VERSION.TXT files will be copied
to the directory,
C:\Program Files\Intel\InfInst
by default. If desired, change the target directory by
selecting 'Browse.' This directory will henceforth be
referred to as <INF Installation Directory>
7. Follow the screen instructions and use default settings
to complete the setup once the operating system has
rebooted.
8. At this point, the installation of the Intel® INF
Installation Utility is complete.
************************************************************
* 5. VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************
NOTE: This procedure is common to both Windows 95 and
Windows 98 systems.
Run Device Manager to verify correct installation and usage
of the INF files.
1. Click on Start
2. Select Settings
3. Select Control Panel
4. Double click on System icon
5. Click on Device Manager tab
6. Click on View devices by Connection button
7. Click on Plug and Play BIOS
8. Click on PCI
9. Check the descriptions for the following entries:
*** NOTE: If you see PCI standard ISA bridge you will need
restart your system and re-run the software.
For Intel® 810 and Intel® 820 Chipset Based Platforms
Only:
Intel® 82802 Firmware Hub Device
Intel® 82801AA LPC Interface Controller
Intel® 82801AA Ultra ATA Controller
Intel® 82801AA USB Universal Host Controller
Intel® 82801AA SMBus Controller
Intel® 82801AA PCI Bridge
*** NOTE: Depending on the system type, the 'AA' in the
above five lines may be replaced by 'AB'
For Intel® 820 Chipset Based Platforms Only:
Intel® 82820 Processor to I/O Controller
Intel® 82820 Processor to AGP Controller
For Intel® 810 Chipset Based Platforms Only:
Intel® 82810 System and Graphics Controller
-or-
Intel® 82810 DC-100 System and Graphics Controller
For Platforms Containing the Intel® 82371AB Controller
Devices:
Intel® 82371AB PCI to ISA bridge (EIO mode)
Intel® 82371AB PCI to ISA bridge (ISA mode)
Intel® 82371AB Power Management Controller
Intel® 82371AB/EB/MB PCI Bus Master IDE Controller
Intel® 82371AB/EB/MB PCI to USB Universal Host Controller
For Platforms Containing the Intel® 82371EB, 82371MB
Controller Devices:
Intel® 82371EB/MB PCI to ISA bridge (EIO mode)
Intel® 82371EB/MB PCI to ISA bridge (ISA mode)
Intel® 82371EB/MB Power Management Controller
Intel® 82371AB/EB/MB PCI Bus Master IDE Controller
Intel® 82371AB/EB/MB PCI to USB Universal Host Controller
For Platforms Containing the Intel® 82371SB Controller
Devices:
Intel® 82371SB PCI to ISA bridge
Intel® 82371SB PCI Bus Master IDE Controller
Intel® 82371SB PCI to USB Universal Host Controller
For Platforms Containing the Intel® 430TX PCIset Device:
Intel® 82443TX Processor to PCI bridge
For Platforms Containing the Intel® 440BX AGPset,
Intel® 440DX AGPset, Intel® 440ZX AGPset Devices:
Intel® 82443BX/ZX/DX Processor to PCI bridge
Intel® 82443BX/ZX/DX Processor to AGP controller
For Platforms Containing the Intel® 440GX AGPset Devices:
Intel® 82443GX Processor to PCI bridge
Intel® 82443GX Processor to AGP controller
For Platforms Containing the Intel® 440LX AGPset Devices:
Intel® 82443LX Processor to PCI bridge
Intel® 82443LX Processor to AGP controller
************************************************************
* 6. IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************
The version of the software included in the distribution
package is specified in the file, VERSION.TXT.
************************************************************
* 7. TROUBLESHOOTING
************************************************************
It is assumed that the system requirements from Section 3
above have been satisfied.
Issue: System locks up during Device Manager Remove or
during restart.
Solution: System lockup can occur during Restart as a
result of several possible system issues. In
the event of system lockup, restart the machine
and view Device Manager. If devices are listed
properly and system experiences no further
problems, then .INF file restore process was
successful. If devices are not configured
correctly try re-running the procedures outlined
in Section 3.
If this does not fix problems or further
problems are experienced, re-install the
operating system.
Issue: After running the setup program and rebooting the
machine, Windows claims that it cannot find one
of the following files:
ESDI_506.pdr
Solution: Click Browse in the dialog box where this problem
occurs and locate the
<Windows>\System\IOSubsys
directory and click OK. The system should
be able to locate this file in this directory
and continue re-enumerating for the new devices.
Issue: After running the setup program and rebooting the
machine, Windows claims that it cannot find one
of the following files:
UHCD.SYS
USBD.SYS
USBHUB.SYS
Solution: Click Browse in the dialog box where this problem
occurs and locate the
<Windows>\System32\drivers
directory and click OK. The system should
be able to locate this file in this directory
and continue re-enumerating for the new devices.
************************************************************
************************************************************
* DISCLAIMER
************************************************************
Intel is making no claims of usability, efficacy or
warranty.
The INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)
completely defines the licensed use of this software.
************************************************************
Information in this document is provided in connection with
Intel products. No license, express or implied, by estoppel
or otherwise, to any intellectual property rights is granted
by this document. Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products including
liability or warranties relating to fitness for a particular
purpose, merchantability, or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, life saving,
or life sustaining applications.
************************************************************
Intel Corporation disclaims all warranties and liabilities
for the use of this document and the information contained
herein, and assumes no responsibility for any errors which
may appear in this document, nor does Intel make a
commitment to update the information contained herein. Intel
reserves the right to make changes to this document at any
time, without notice.
************************************************************
************************************************************
* Third-party brands and names are the property of their
respective owners.
Copyright © Intel Corporation, 1998-1999
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.