*****************************************************************************
* *
* Microsoft Windows for Workgroups 3.11 Installation *
* for Dayna CommuniCard Family *
* *
*****************************************************************************
Installation Procedures for CommuniCard /E:
(1) Make a directory "\Dayna" then copy the LANEN.EXE from driver
diskette to \Dayna.
C:\>MD \DAYNA
C:\>COPY A:\DOS\LANEN.EXE C:\DAYNA\LANEN.EXE
(2) Reboot the PC with the CommuniCard in the PCMCIA slot
(3) Start Microsoft Windows for Workgroups 3.11
(4) Select "Network Setup" from Program Group "Network"
(5) Select "Drivers..."
(6) Select "Add Adapter..."
(7) Select "Unlisted or Updated Network Adapter"
(8) Type in the path name A:\WFW311 and insert the Installation diskette into
drive A:
(9) Setup the correct interrupt (IRQ) number and base I/O port address. This
should match the assignment to the card.
(10) Setup the correct networking support for Windows and file/printer
sharing options
(11) Restart the PC
(12) Edit the AUTOEXEC.BAT file to add the command
"C:\DAYNA\LANEN /IOP=320 /IRQ=11"
before "NET START".
****************************************************************************
Installation Procedures for CommuniCard PLUS:
(1) Start Microsoft Windows for Workgroups 3.11
(2) Select "Network Setup" from Program Group "Network"
(3) Select "Drivers..."
(4) Select "Add Adapter..."
(5) Select "Unlisted or Updated Network Adapter"
(6) Type in the path name A:\WFW311 and insert the Installation diskette into
drive A:
(7) Setup the correct interrupt (IRQ) number and base I/O port address. This
should match the assignment to the card.
(8) Setup the correct networking support for Windows and file/printer
sharing options
(9) Restart the PC
If you have problems or don't have Card & Socket Services installed on your
machine, try the following:
Under DOS, install PCMCIA software of your choice or add the
following line in CONFIG.SYS before DEVICE=EMM386.EXE:
DEVICE=C:\CARDEN.EXE /COM=n /IO=nnn (Modify path accordingly.)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.