[Version]
Signature="$CHICAGO$"
Class=HDC
provider=%MSFT%
[Manufacturer]
%MfgName%=Microsoft
[Microsoft]
; Use USBMSC IDs
;
; Sigmatel MSCNMMC
%USB\Generic.DeviceDesc%=Generic.install,USB\VID_066F&PID_2010
%USB\Generic.DeviceDesc%=Generic.install,USB\VID_066F&PID_2011
; Add customized devices here
%STUMS\Generic.DeviceDesc%=stumspdr.install,STUMS\DISK
[PreCopySection]
HKR,,NoSetupUI,,1
[DestinationDirs]
; \<WINDIR>\SYSTEM32\DRIVERS
stums.files = 10,System32\Drivers
; \<WINDIR>\SYSTEM\IOSUBSYS
stumspdr.files = 12
[Generic.install]
CopyFiles=stums.files, stumspdr.files
AddReg=stums.addreg
[Generic.install.HW]
AddReg=bulkonly.addreg.HW
[stums.addreg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,STUMS.SYS
; If the device does not correctly indicate which protocol it uses,
; one of the following sections should be added to indicate which protocol
; the driver should use.
; Indicate that the device uses the C/B/I protocol
[cbi.addreg.HW]
HKR,,DeviceProtocol,0x10001,00
; Indicate that the device uses the C/B protocol
[cb.addreg.HW]
HKR,,DeviceProtocol,0x10001,01
; Indicate that the device uses the BULK ONLY protocol
[bulkonly.addreg.HW]
HKR,,DeviceProtocol,0x10001,0x50
HKR,,DeviceType,0x10001,0x00
; Install the port driver
[stumspdr.install]
AddReg=stumspdr.addreg
[stumspdr.addreg]
HKR,,DevLoader,,*ios
HKR,,PortDriver,,stumspdr.pdr
[stums.files]
stums.sys
[stumspdr.files]
stumspdr.pdr
[SourceDisksNames]
1000 = %DiskName%,"",,
[SourceDisksFiles]
STUMS.SYS = 1000
STUMSPDR.PDR = 1000
[Strings]
MSFT="Microsoft"
MfgName="Microsoft"
;---------------------------------------------------------------;
;
; Translated strings appended here during installation after
; determining default language of the host system.
; English
USB\Generic.DeviceDesc="GoChip(TM) USB2.0 Flash Drive Controller"
DiskName="USB Mass Storage Driver Disk"
STUMS\Generic.DeviceDesc="USB Mass Storage Device"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.