********************************************************************
* INTEL CORPORATION PROPRIETARY INFORMATION *
* *
* This software is supplied under the terms of a license agreement *
* or nondisclosure agreement with Intel Corporation and may not be *
* copied or disclosed except in accordance with the terms of that *
* agreement. *
* *
* Copyright (c) 2000 Intel Corporation. All Rights Reserved. *
********************************************************************
Intel(R) Boot Agent (PXE) WMI Provider 1.1
====================================================================
README CONTENTS
===============
1. Overview
2. System Requirements
3. Installation
4. Uninstall Procedure
5. Usage with Applications
6. Supported Standards
7. Known Issues
8. Value tables
1. Overview
============
The Intel(R) Boot Agent (PXE) Windows Management
Instrumentation (WMI) Provider is a set of software modules that
allow WMI-based management applications to manage the PXE
capabilities of Intel(R) network adapters. PXE WMI Provider
uses WMI, a kernel-level instrumentation technology for the
Microsoft Windows platform.
WMI is the middleware layer that allows measurement and
instrumentation information to be collected from kernel mode
data providers, which is then provided to local or remote
user-mode data consumers through the use of a common set of
interfaces (Web-based Enterprise Management called WBEM). WMI
is a data-independent pipeline between the data consumer and
the data provider that makes no assumptions about the format
of the data.
The PXE WMI Provider lets WMI-aware management applications
configure the boot agent on Intel PRO adapters.
WMI-aware management applications using PXE WMI Provider
functionality can configure the pre-boot agent with the
following information:
- Display the setup message
- Prompt time for the setup message
- Legacy OS wakeup support
- Network boot protocol
- Boot order specification
- BIOS boot order specification
- Caption
- Description
- Status text
2. System Requirements
======================
- Intel(R)Set II v4.0 or greater
- Intel(R)Set drivers v4.0 or greater
- Microsoft WMI Core
- Windows* NT4 (SP4) and beyond or Windows 98(SP1 and later) or
Windows 95(OSR 2.0 and later) or Windows Millenium or Windows 2000.
- Intel(R) Boot Agent v3.0 or greater
The WMI Core components are part of the operating system. These
pieces are required for a WMI enabled application to work.
The PXE WMI Provider supports all Intel PCI PRO/100 adapters with
a boot agent that is version 3.0 or greater.
3. Installation
===============
To install PXE WMI Provider, click on the PXE WMI Provider setup program
on the Intel CD. WMI Core components must be installed before PXE WMI
Provider is installed. If PXE WMI Provider does not find the WMI Core
component's registry keys, install fails. If Microsoft WMI Core is not
installed, install it and restart the PXE WMI Provider installer.
The most recently released version of Microsoft WMI Core can be
downloaded from:
http://msdn.microsoft.com/downloads/sdks/wmi/download.asp
4. Uninstall Procedure
======================
To Uninstall PXE WMI Provider:
- From the Control Panel, double click on the Add/Remove
Programs icon.
- On the Install/Uninstall tab, select "Intel(R) Boot Agent WMI Provider".
- Click the "Add/Remove..." button.
5. Usage with Applications
==========================
WMI-based management applications such as WBEM CIM studio and WBEM
Object browser in the WMI SDK can be used to access PXE WMI
Provider functionality both locally and remotely. This applies to
Windows NT 4.0 Systems (SP4 and later) and Windows 2000 systems.
On Windows 95/98 or Millenium operating systems however, you must
carefully configure client systems to allow remote access of PXE WMI
Provider functionality.
To do this, you will need to edit the Windows 95/98 or Millenium
system registry to remotely access PXE WMI Provider functionality on
Windows 95/98 or Millenium systems from Windows NT(*).
**CAUTION**: Editing the system's registry incorrectly can cause
serious problems that may require you to reinstall Windows 95/98
or Millenium. Be very careful when editing the following registry
entries. Back up any important data before beginning this
process. Be aware that enabling DCOM applications to connect
anonymously to your Windows 95/98 or Millenium system may
violate your network's security policies. Consult with your system
administrator before making these changes.
A) Open regedit (Start-Run-regedit) on the Windows 95/98 or Millenium
system, and ensure that the following values are set correctly.
i) HKLM\Software\Microsoft\OLE\EnableDCOM should be set to its
default of "Y".
ii) HKLM\Software\Microsoft\OLE\EnableRemoteConnect should be
changed to "Y".
iii) HKLM\software\microsoft\wbem\cimom\AutostartWin9x should be
changed to "2".
iv) HKLM\software\microsoft\wbem\cimom\EnableAnonConnections
should be changed to "1".
v) Restart the system.
B) Log onto the Windows 95/98 or Millenium system remotely
from a Windows NT 4.0 system or a Windows 2000 system using WBEM
CIM Studio from the WMI SDK.
i) Enter the UNC name of the Windows9x or Millenium system in
the "Machine name" box and click "Connect."
ii) In the WBEM CIM Studio login window, choose "Options" to see
the full set of login choices.
iii) Leave "Login as current user" checked.
iv) Leave "impersonation level" set to impersonate.
v) For "authentication level", choose "None." Click OK.
This should allow you to connect to your Windows 95/98 or Millenium
system remotely.
6. Supported Standards
======================
The PXE WMI Provider implements the CIM specification that was
submitted to DMTF for adoption into CIM 2.3 specification.
7. Known Issues
===============
- Under some circumstances, the process winmngt.exe may not start
on a Windows 95/98 or Millenium system. This results in
a browsing machine being unable to connect to the Windows 95/98 or
Millenium machine.
The browser (CIM Studio or other) may show an error "the RPC server
is unavailable". If pview95.exe shows that winmngt.exe is not
executing, double click the file to begin execution. This may be
fixed permanently by upgrading to a newer version of the WBEM core.
8. Value Tables
===============
BIOSBootSelectionFlag
---- -----------------------------------
0 Use agent boot order
1 Use BIOS boot order
255 Unknown boot type selection
BootOrderFlag
---- -----------------------------------
0 Network first, local second
1 Local first, network second
2 Network only
3 Local only
255 Unknown boot order
NetworkBootProtocolFlag
---- -----------------------------------
0 PXE Protocol
1 RPL Protocol
255 Unknown boot protocol
SetupMenuWaitTimeFlag
---- -----------------------------------
0 2 second wait
1 3 second wait
2 5 second wait
3 8 second wait (valid for Intel Boot Agent v3.x)
254 0 second wait (valid for Intel Boot Agent v4.x)
255 Unknown wait time value
--------------------------------------------------------------
* Other product and corporate names may be trademarks of other
companies and are used only for explanation and to the owner's
benefit, without intent to infringe.
Readme.txt version 08-10-2000
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.