Nov 1995
EZ-2000+ Series Ethernet Card
SCO UNIX LLI Driver Installation
==================================
* Installation for multiple cards *
-----------------------------------
This installation is for LLI drivers of SCO UNIX with TCP/IP v.1.2x.
1). It is allowed to install up to 4 NICs. The following is as an example:
EZ-2000+ *4 or
any combination of 4
2). Support gateway function. ( routing function )
3). Statistic function can be inspected with the following command:
# netstat -i
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Collis
d10e0 1500 192.9.200 unix2 423 0 423 0 0
d22e0 1500 15 unix3 423 0 423 0 0
d20e0 1500 168.8 unix 556 0 890 0 0
lo0 2048 170.23 localhost 180 0 180 0 0
*********************
* Install Procedure *
*********************
The following files will be used in this installation:
Files Contents
----------- ---------------------------------------------------
driver.o EZ-2000+ Series Driver Program
setup EZ-2000+ software setup program
info Used by netconfig
init Used by netconfig
master Used by netconfig
node Used by netconfig
reconf Used by netconfig
remove Used by netconfig
space.c Used by netconfig
system Used by netconfig
1. Login as root user. (On maintenance mode)
2. Put driver diskette in floppy A:(or B:) and use doscp command to copy SCO
UNIX Driver into UNIX's directories.
# cd /
# doscp a:/scounix/setup /setup
(or # doscp b:/scounix/setup /setup)
# chmod +x /setup
# ./setup a:
(or # ./setup b:)
3. #netconfig
Available options:
1) Add a chain
2) Remove a chain
3) Reconfigure an element in a chain
q) Quit Select 1. Add a chain
4. Select top level of chain to Add or q to quit: 1. sco_tcp
(SCO TCP/IP for UNIX)
5. Select next level of chain to Add or q to quit: Select d22e0
Ethernet Driver unit 0
6. Add chain sco_tcp->d22e0 (y/n): type 'y'
Note:
Add chain sco_tcp->d22e0 (y/n)
:
Add chain sco_tcp->d22e1 (y/n)
It depends on card number.
7. Enter number of media mode selection (0 1 2 3 4) [3] or 'q' to quit: n
8. Enter the internet Address of this interface n.n.n.n
9. Enter the netmask for this interface (default 255.255.255.0)
10. Does the interface use a broadcast address of all 1's (y/n) default : y
11. Enter the broadcast address for this interface default: n.n.n.n
12. Are these values correct ? (y/n) y
13. XX Pseudo ttys are currently configured, do you want to:
1) Add Pseudo ttys
2) Remove Pseudo ttys
Select an option or enter q to quit [q] q
14.Available options:
1) Add a chain
2) Remove a chain
3) Reconfigure an element in a chain
q) Quit Select option: q
15. Do you want to relink to kernel now ? y
16. Do you want this kernel to boot by default (y/n) y
17. Do you want the kernel environment rebuilt (y/n) y
18. Reboot unix
# shutdown -y -g0
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.