3SHARE.TXT Driver File Contents (EZ2000p.zip)

                                                                Nov 1995

                         EZ-2000+ Series Ethernet Card
                 Packet Driver for 3Com 3+ Share Installation
                 ============================================

Copyright (c) 1995 by Ether Corporation. All rights reserved.

*******************************************
* Packet Driver Program for 3Com 3+ Share *
*******************************************

The 3Com 3+ Share Driver Program lets you run 3Com 3+ Share on your PC with
the EZ-2000+ Series Ethernet Card.

The following files will be used in this installation:

Files         Description
-----------   -------------------------------------------------------
EZ2000.SYS    Packet driver program for EZ-2000+ Series Card
ETH.SYS       3Com 3+ Share driver program

1. Follow the installation procedure for 3Com EtherLink board.

2. Copy the program ETH.SYS from the Installation Diskette for
   the EZ-2000+ Series Ethernet card to the boot disk/diskette.
   This program will replace the program of the same file name
   (ETH.SYS) when you perform the installation procedure  in
   step 1  above.

3. In the CONFIG.SYS file on the boot disk/diskette, make sure
   you have the following two statements.  The order of these
   two statement must be as shown below.

     DEVICE = EZ2000.SYS <-d> <-w> <packet_int_no>
     DEVICE = ETH.SYS

You may now reboot and start your 3COM workstation.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.28