Nov 1995
EZ-2000+ Series Ethernet Card
NDIS Driver for SUN PC-NFS V5.0 Installation
============================================
[Method 1 -- NDIS Driver]
=========================
When using PC-NFS and LAN Manager networks at the same time, on the screen of
the PC-NFS install program, please select "NDIS" . It works fine with the NDIS
driver included in the subdirectory \NDIS\DOS of the shipping driver diskette.
Please copy the files as shown below into the \NFS directory of your hard disk.
The following files will be used in this installation:
File Description
------------ ----------------------------------------------------------------
NFS-NDIS.SYS PC-NFS Driver Program
EZ2000.DOS NDIS driver program
PROTMAN.SYS MS PROTOCOL MANAGER
NETBIND.EXE MS LAN MANAGER Netbind
About the content of the configuration files, please refer the following.
CONFIG.SYS AUTOEXEC.BAT
ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄ
SWITCHES=/F SET TZ=EST5EDT
DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE
DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g
DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS;
BUFFERS=10,0 C:\LANMAN\NETBIND
FILES=40 SET TEMP=C:\DOS
STACKS=0,0 SET NFSDRIVE=C
LASTDRIVE=G SET NFSPATH=C:\NFS
SHELL=C:\DOS\COMMAND.COM C:\DOS /P SET TN_DIR=C:\NFS\TELNET
DEVICE=C:\NFS\PCNFS.SYS /l40 C:\NFS\PRT *
DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\NET INIT
DEVICE=C:\LANMAN\PROTMAN.SYS /I:C:\LANMAN
DEVICE=C:\LANMAN\NFS-NDIS.SYS
DEVICE=C:\LANMAN\EZ2000.DOS
PROTOCOL.INI
ÄÄÄÄÄÄÄÄÄÄÄÄ
[PROTOCOL MANAGER]
DriverName = PROTMAN$
[EZ2000_NIF]
DRIVERNAME = EZ2000$
[NFS-NDIS]
DriverName = NFSLINK$
Bindings = EZ2000_NIF
To use NDIS driver, the user has to obtain a PC-NFS 5.0 QUIKNDIS diskette.
[Method 2 -- Packet Driver]
===========================
When using PC-NFS without any other NOS at the same time, on the screen of the
PC-NFS install program, please select "OTHER" . It works fine with the PACKET
driver included in the subdirectory \PKTDRV of the shipping driver diskette.
Please copy the files as shown below into the \NFS directory of your hard disk.
The following files will be used in this installation:
File Description
------------ ----------------------------------------------------------------
PDNFS.SYS PC-NFS Driver Program
EZ2000.SYS Packet driver program
About the content of the configuration files, please refer the following.
CONFIG.SYS AUTOEXEC.BAT
ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄ
SWITCHES=/F SET TZ=EST5EDT
DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE
DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g
DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS;
BUFFERS=10,0 SET TEMP=C:\DOS
FILES=40 SET NFSDRIVE=C
STACKS=0,0 SET NFSPATH=C:\NFS
LASTDRIVE=G SET TN_DIR=C:\NFS\TELNET
SHELL=C:\DOS\COMMAND.COM C:\DOS /P C:\NFS\PRT *
DEVICE=C:\NFS\PCNFS.SYS /l40 C:\NFS\NET INIT
DEVICE=C:\NFS\SOCKDRV.SYS
DEVICE=C:\NFS\EZ2000.SYS
DEVICE=C:\NFS\PDNFS.SYS
[Method 3 -- ODI Driver]
========================
When using PC-NFS and NETWARE 3.1x or 4.0 networks at the same time, on the
screen of the PC-NFS install program, please select "ODI" . It works fine with
the ODI driver included in the subdirectory \NETWARE\CLIENT\ODI.DOS of the
shipping driver diskette. Please copy the files as shown below into the \NFS
directory of your hard disk. The following files will be used in this
installation:
File Description
------------ ----------------------------------------------------------------
NFSODI.SYS PC-NFS Driver Program
EZODI.COM ODI driver program
LSL.COM NetWare Link Support Layer
IPXODI.COM NetWare IPX/SPX Protocol
NETX.EXE NetWare Workstation Shell
About the content of the configuration files, please refer the following.
CONFIG.SYS AUTOEXEC.BAT
ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄ
SWITCHES=/F SET TZ=EST5EDT
DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE
DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g
DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS;
BUFFERS=10,0 SET TEMP=C:\DOS
FILES=40 SET NFSDRIVE=C
STACKS=0,0 SET NFSPATH=C:\NFS
LASTDRIVE=G SET TN_DIR=C:\NFS\TELNET
SHELL=C:\DOS\COMMAND.COM C:\DOS /P LSL
DEVICE=C:\NFS\PCNFS.SYS /l40 EZODI
DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\PRT *
DEVICE=C:\NFS\NFSODI.SYS /b2 C:\NFS\NET INIT
IPXODI
NETX
NET.CFG
ÄÄÄÄÄÄÄ
Link driver EZODI
Frame Ethernet_802.3
Frame Ethernet_II
Protocol IPX 0 Ethernet_802.3
If your Novell FILE SERVER is configured to use FRAME=Ethernet_802.3, add a/b2
switch to the line DEVICE=C:\NFS\NFSODI.SYS in your CONFIG.SYS file and add an
entry in your NET.CFG file defining the two frames types.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.