PCMCIA 10/100 Fast Ethernet + 56K Fax/Modem PC Card Netware DOS ODI Driver installation Contents ÄÄÄÄÄÄÄÄ Introduction Getting Started Support Options Copyrights, Trademarks, and Disclaimers Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ The ODI driver program allows you to run multiple protocol stacks and install up to two network adapters in a workstation. This ODI driver supports the Port, Node Address, Protocol and Frame options for creating your own NET.CFG file. For more information on these keywords, please refer to Novell's "NetWare ODI shell for DOS - NET.CFG options". This installation assumes that the PCMCIA drivers are working properly. Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ There are two methods, manual installation (for NW 3.11 wks) and Novell Client install (for NW 3.12 & 4.x) Manual Installation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Copy the LMODI.COM file from this diskette into the Netware client directory containing Novell's LSL.COM, IPXODI.COM and NETx.COM files. Follow Novell's instructions on using ODI programs. You can substitute the LMODI.COM whenever a reference is made to the Hardware Specific Module. A typical ODI workstation startup batch file includes: >LSL ; Link Support Layer Module provided by Novell >LMODI ; Hardware Specific Module >IPXODI ; IPX Protocol Stack Module provided by Novell >NETx ; DOS Shell Support Module provided by Novell >LOGIN Novell Client Installation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Run the NetWare Client Install v1.21 -Get the 4 Client disks from the network administrator or -Run the \NWCLIENT\INSTALL.EXE in a previous installation A message appears on the screen asking you whether or not you want the program to perform modifications on your AUTOEXEC.BAT and CONFIG.SYS files. Answer "Yes". The program then modifies your AUTOEXEC.BAT and CONFIG.SYS files accordingly and creates backup copies. The following message appears: -Install support for MS Windows? (Y/N): Answer accordingly and provide a path if necessary. The program displays the following: -Configure the workstation for backup by a NetWare server running software such as SBACKUP? (Y/N): No Answer accordingly and provide a path if necessary. Select a driver for your network board. From the driver list, select "Other Drivers". Go to the Insert the Driver Disk dialog box and specify the path where the ODI driver and INS files reside. For example: C:\ODI.DOS. Press Enter and select the target ODI driver. Specify the driver's optional settings. Press F10 to save to new configuration. Highlight "Install press here" and press <Enter> to install. The program copies the necessary files for NetWare Client. Continue the installation procedure to completion. Upon completion, a new NET.CFG file will be created in your DOS directory. Typically, this file contains the following lines: Link Driver LMODI PORT 320 INT 11 #FRAME Ethernet_802.3 FRAME Ethernet_802.2 : An ordinary startnet.bat for the ODI workstation performs the following: SET NWLANGUAGE=ENGLISH --Set NetWare 4.X to English language LSL --Link Support Layer Module provided by Nvl LMODI --Hardware Specific Module IPXODI --IPX Protocol Stack Module provided by Nvl VLM --DOS Support Module provided by Novell F: --Change to connected device LOGIN .ADMIN --Login to file server as user ADMIN Run STARTNET to access the Novell network. Support Options ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ We are consistently improving and upgrading our drivers. you are welcomed at any time to browse through our BBS, and download any drivers, utilities and help files. If you still cannot get the LanModem working properly, our technical experts are always ready to help. Please be at your computer, have your LanModem, Drivers Disk, and the following information available: * Version number of CARDEN.EXE or any drivers you are running * The extact text of any error message displayed on your screen * The type of computer * The type of network Copyrights, Trademarks, and Disclaimers ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are rights reserved by Microsoft Corporation All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights reserved by Novell Corporation Further rights reserved to their respective corporationsDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.