oemsetup.inf Driver File Contents (lan.zip)

;
;  Purpose: Netcard setup information file for Windows NT 3.51/4.0
;
;  Author:  Tevin Chen
;
;  Date:    Jan, 2000
;
;


[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    PCI
[Options]
    ; VT3043
    VT3043
[ConnectionChoicesVT3043]
    Connect_0 = "Auto-Negotiation", 0
    Connect_1 = "100BaseTx Half Duplex", 1
    Connect_2 = "100BaseTx Full Duplex", 2
    Connect_3 = "10BaseT   Half Duplex", 3
    Connect_4 = "10BaseT   Full Duplex", 4
;    Connect_5 = "1Mb       Phone Line", 5
[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "VIA Technologies, Inc."
; Driver Version info
; VERSION.... 2.61
ProductMajorVersion     = "2"
ProductMinorVersion     = "61"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

; DEVICE_ID....
; (0x1106 == 4358)
VendorID = 4358


ProductSoftwareName     = "FETNDIS"
ProductSoftwareTitle    = "VIA PCI 10/100Mb Fast Ethernet Adapter [NDIS3] Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\FETND3.SYS"
NetRuleSoftwareType     = "FETSys ndisDriver FETDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """FETSys"" yes no container"
NetRuleSoftwareClass    = {"FETDriver basic"}
NetRuleSoftwareSWBindable = {"FETDriver VT3043Adapter non exclusive 100"}

OptionHelpFile = "FETNDH.HLP"
ProductHardwareName = "FETNDIS"

ProductHardwareVT3043Title = "VIA PCI 10/100Mb Fast Ethernet Adapter"
NetRuleHardwareVT3043Type  = "VT3043 VT3043Adapter"
NetRuleHardwareVT3043Class = {"VT3043Adapter basic"}
AdapterVT3043Type = 5   ;; PCI board
HelpVT3043Id = 30
; DEVICE_ID....
; VT3043 (0x30431106 == 809701638)
VT3043CFID = 809701638

; VT3065 (0x30651106 == 811929862)
VT3065CFID = 811929862


NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
    ifstr(i) $($1) == ""
       goto returnoptions
    endif
    set PlatformList = ^(PlatformsSupported, 1)
    Ifcontains(i) $($1) in $(PlatformList)
       goto returnoptions
    else
       set Status = STATUS_NOTSUPPORTED
       goto finish_ReturnOptions
    endif
    else
    set Status = STATUS_NOLANGUAGE
    goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
    Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
    set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
    set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
    set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
    set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
      Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
           Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
             goto ShellCodeError
           endif
           set Error = $($R0)
           set from = end
           set to = end
           goto nonfatalinfo
      else
           set StartLabel = configureadapter
      endif
   else
    set StartLabel = installadapter
    set OEM_ABANDON_OPTIONS = {}
    set OEM_ABANDON_SOFTWARE = FALSE
    set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
    CloseRegKey $(KeyProduct)
    ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
       Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
           $(ProductVersion)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
           goto ShellCodeError
       endif
       goto end
    else
       Shell $(UtilityInf), CardExistedDlg
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
          goto ShellCodeError
       endif
       ifstr(i) $($R1) != "OK"
           set CommonStatus = STATUS_USERCANCEL
           goto end
       endif
       set OldVersionExisted = $(TRUE)
    endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Goto ShellCodeError
    Else-Ifstr(i) $($R0) == STATUS_FAILED
        Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
           goto ShellCodeError
        endif
        set Error = $($R0)
           Goto fatal
    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
           Goto successful
    Endif
    Set SrcDir = $($R1)
    ; HELP....
    install "Install-Hlp"
    endif
    Goto installproduct
configureadapter = +
   Ifstr(i) $(KeyProduct) == $(KeyNull)
    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) == $(KeyNull)
        Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
       Goto fatalregistry
    Endif
    Endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
    Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
    Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
    set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
    goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
    set ValueItem = $($)
    set ValueName = *($(ValueItem),1)
    set ValueData = *($(ValueItem),4)
    Ifstr(i) $(ValueName) == "ConnectionType"
        set ConnectionIndex = $(ValueData)
    endif
    EndForListDo
    set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
    ifstr(i) $(ConnectionValue) == ""
    set ConnectionValue = *($(ConnectionList), 2)
    endif
adapteroptions = +
    set from = adapteroptions
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
       set ConnectionIndex = $(Combo1Out)
       ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
       set CommonStatus = STATUS_USERCANCEL
       ui pop 1
       goto end
    else
       ui pop 1
       goto end
    endif
    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
    ifstr(i) $(!NTN_InstallMode) == configure
       goto updateparameters
    endif
installproduct =+
    StartWait
    ; DEVICE_ID....
    ; 65535

    ; search device ID for 3043 and 3065
    set AdapterList65 = {}
    set AdapterList43 = {}

    set-div DeviceID = $(VT3043CFID) 65535
    Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
         goto ShellCodeError
    endif

    ifstr(i) $($R0) == {}
         set-div DeviceID = $(VT3065CFID) 65535
         Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)

         ifint $($ShellCode) != $(!SHELL_CODE_OK)
              goto ShellCodeError
         endif

         ifstr(i) $($R0) == {}
              set Error = $(CANNOT_FIND_ANY_CARD)
              set CommonStatus = USER_CANCEL
              set from = end
              goto nonfatal
         else
              set AdapterList65 = $($R0)
         endif
    else
         set AdapterList43 = $($R0)

         set-div DeviceID = $(VT3065CFID) 65535
         Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)

         ifint $($ShellCode) != $(!SHELL_CODE_OK)
              goto ShellCodeError
         endif

         ifstr(i) $($R0) != {}
              set AdapterList65 = $($R0)
         endif
    endif

    ifint $(OldVersionExisted) == $(FALSE)
    Ifstr(i) $(DoCopy) == "YES"
       Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
       Ifint $($ShellCode) != $(!SHELL_CODE_OK)
           Goto ShellCodeError
       Else-Ifstr(i) $($R0) == STATUS_FAILED
           Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
          goto ShellCodeError
           endif
           set Error = $($R0)
           Goto fatal
       Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
           Goto successful
       Endif
       Set SrcDir = $($R1)
    Endif
    install "Install-Option"
    ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
       Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
           goto ShellCodeError
       endif
       set Error = $($R0)
       goto fatal
    endif
    Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName), +
        $(ProductSoftwareName), +
        $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
        $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
        $(NetEventDLL)
    Set OEM_ABANDON_SOFTWARE = TRUE
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
        EndWait
        CloseRegKey $($R1)
        CloseRegKey $($R2)
        CloseRegKey $($R3)
        CloseRegKey $($R4)
        CloseRegKey $($R5)
        goto fatalregistry
    endif
    Set SoftProductKey      = $($R1)
    Set SoftNetRuleKey      = $($R2)
    Set SoftServiceKey      = $($R3)
    Set SoftParameterKey    = $($R4)
    Set SoftLinkageKey      = $($R5)
    set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
               {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
               {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
               {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
               {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
               {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
               {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
        EndWait
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        goto fatalregistry
    endif
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
                {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    CloseRegKey $(SoftProductKey)
    CloseRegKey $(SoftNetRuleKey)
    CloseRegKey $(SoftServiceKey)
    CloseRegKey $(SoftParameterKey)
    CloseRegKey $(SoftLinkageKey)
    Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
        EndWait
        goto fatalregistry
    endif
    endif

    ifstr(i) $(AdapterList65) == {}
            goto InstallAdapter43
    endif

    ForListDo $(AdapterList65)
    set BusNum = *($($),1)
    set DeviceNum = *($($),2)
    set FunctionNum = *($($),3)
        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
            $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        ifstr $($R0) != "NO_ERROR"
            set Error = $($R0)
            goto fatal
        endif
        ifstr(i) $($R1) != "YES"
            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
            ifint $($R4) != -1
            Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
             EndWait
             CloseRegKey $($R1)
             CloseRegKey $($R2)
             CloseRegKey $($R3)
             goto fatalregistry
            endif
;           read-syms FileDependentDlg$(!STF_LANGUAGE)
;           SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
;           ui start "InputDlg"
;           ifstr(i) $(DLGEVENT) == "CONTINUE"
;            set ConnectionIndex = $(Combo1Out)
;            ui pop 1
;           else-ifstr(i) $(DLGEVENT) == "BACK"
;            set CommonStatus = STATUS_USERCANCEL
;            ui pop 1
;            goto end
;           else
;            ui pop 1
;            goto end
;           endif
;           set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
            Set HardNetCardKey      = $($R1)
            Set HardNetRuleKey      = $($R2)
            Set HardParameterKey    = $($R3)
            set AdapterNumber = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                    {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                    {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                    {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                    {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                    {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
             goto ShellCodeError
            endif
            set BusTypeNum = 5
            set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                    {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                    {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                    {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3065CFID)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
            endif

            ; for 3065 registery
            set NewValueList = {{ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),32},+
                        {TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),32},+
                        {ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),32},+
                        {ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                        {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                        {BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {MapRegisters,$(NoTitle),$(!REG_VT_DWORD),32},+
                        {EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+
                        {EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+
                        {ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {ReceivePAUSE,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {OsId,$(NoTitle),$(!REG_VT_DWORD),262144},+
                        {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"}}
; NT_351 = 0x00040000 = 262144(10)
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            endif

            set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
            endif
            set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
            set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
            set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                    {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
            endif
            CloseRegKey $(HardNetCardKey)
            CloseRegKey $(HardNetRuleKey)
            set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                    {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                    {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            CloseRegKey $(HardParameterKey)
        endif
    endif
    EndForListDo

    ifstr(i) $(AdapterList43) == {}
            goto InstallAdapterOK
    endif

InstallAdapter43 =+

    ForListDo $(AdapterList43)
    set BusNum = *($($),1)
    set DeviceNum = *($($),2)
    set FunctionNum = *($($),3)
        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
            $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        ifstr $($R0) != "NO_ERROR"
            set Error = $($R0)
            goto fatal
        endif
        ifstr(i) $($R1) != "YES"
            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
            ifint $($R4) != -1
            Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
             EndWait
             CloseRegKey $($R1)
             CloseRegKey $($R2)
             CloseRegKey $($R3)
             goto fatalregistry
            endif
            ;read-syms FileDependentDlg$(!STF_LANGUAGE)
            ;SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)

; support unattended mode installation under windows NT 4.0 (AJ 03/22/1999)
ifstr $(!STF_GUI_UNATTENDED) != "YES"
            ;ui start "InputDlg"
            ;ifstr(i) $(DLGEVENT) == "CONTINUE"
            ;    set ConnectionIndex = $(Combo1Out)
             ui pop 1
            ;else-ifstr(i) $(DLGEVENT) == "BACK"
            ;    set CommonStatus = STATUS_USERCANCEL
            ;    ui pop 1
            ;    goto end
            ;else
            ;    ui pop 1
            ;    goto end
            ;endif
endif

            ;set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
            Set HardNetCardKey      = $($R1)
            Set HardNetRuleKey      = $($R2)
            Set HardParameterKey    = $($R3)
            set AdapterNumber = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                    {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                    {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                    {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                    {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                    {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
             goto ShellCodeError
            endif
            set BusTypeNum = 5
            set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                    {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                    {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                    {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3043CFID)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
            endif

            ; for 3043 registery
            set NewValueList = {{ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
                        {TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),8},+
                        {ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),32},+
                        {ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                        {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                        {BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {MapRegisters,$(NoTitle),$(!REG_VT_DWORD),8},+
                        {EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+
                        {EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+
                        {ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {OsId,$(NoTitle),$(!REG_VT_DWORD),524288},+
                        {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"}}
; NT_40 = 0x00080000 = 524288(10)
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            endif

            set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
            endif
            set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
            set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
            set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                    {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
            endif
            CloseRegKey $(HardNetCardKey)
            CloseRegKey $(HardNetRuleKey)
            set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                    {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                    {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            CloseRegKey $(HardParameterKey)
        endif
    endif
    EndForListDo

InstallAdapterOK =+

    EndWait
    goto successful
updateparameters =+
    set HardParameterKey    = $($R3)
    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    CloseRegKey $(KeyParameters)
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
    Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    else
    Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
        $(ProductSoftwareName), $(!NTN_RegBase)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    endif
    goto end
UpgradeSoftware = +
     OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
     Ifstr $(KeyProduct) != $(KeyNull)
       Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
           Debug-Output "ShellCode error"
           goto ShellCodeError
       endif
       set !UG_Filename = $($R0)
       install "Install-Update"
       ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           goto fatal
       endif
       SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
       SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
       CloseRegKey $(KeyProduct)
     else
       goto fatalregistry
     endif
     goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
    Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
        $(ProductSoftwareName), $($)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
    Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName), FALSE
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
    goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
    goto $(from)
    else
    goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
    Set Severity = NONFATAL
    Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
    goto $(from)
    else
    goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
    Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
    set OEM_ABANDON_ON = FALSE
    goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
    AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit
[Install-Hlp]
   set STF_VITAL = ""
   AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   ; HELP....
   AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit
[Source Media Descriptions]
    1  = "VIA PCI 10/100Mb Fast Ethernet Adapter [NDIS3] Driver"
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
STF_PLATFORM = Alpha
[Files-Inf]
2,      oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[Files-VT3043]
1,FETND3.SYS , SIZE=999
[Files-Hlp]
1,FETNDH.HLP , SIZE=999
[LanguagesSupported]
    ENG
[OptionsTextENG]
    VT3043  = "VIA PCI 10/100Mb Fast Ethernet Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
           "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription = "VIA PCI 10/100Mb Fast Ethernet Adapter [NDIS3] Driver"

FunctionVT3043Title = "VIA PCI 10/100Mb Fast Ethernet Adapter Setup"
ProductHardwareVT3043Description = "VIA PCI 10/100Mb Fast Ethernet Adapter"

ConnectionList  = ^(ConnectionChoices$(Option), 1)
ConnectionValues = ^(ConnectionChoices$(Option), 2)
NoList  = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText      = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileDependentDlgENG]
DlgText = "Choose the proper cable type for the "+
      "network adapter. Select [Help] for a detailled "+
      "description of the available options of the list."
DlgTemplate = "ADAP_PROTO_COMBO"
DlgType = "Combination"
Caption = $(Function$(Option)Title)
Combo1Label = "&Connection Type:"
Combo1List = $(ConnectionList)
Combo1Out  = $(ConnectionValue)
ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextLim = ""
CBOptionsGreyed = {}
MinHelpId = 10
MaxHelpId = 1140
HelpContext = $(Help$(Option)Id)

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.64