eeprom.txt Driver File Contents (lan.zip)

*****************************************************************************
*                                                                           *
*                            EEPROM Utility                                 *
*                                                                           *
*                           v2.43   Oct. 2000                               *
*                                                                           *
*****************************************************************************

Introduction:
=============

  This document shows you how to use the eeprom utility. This utility runs
under DOS environment.


Contents of the Subdirectory:
=============================

    EEPROM.EXE          The eeprom utility program file.
    EEPROM.CFG          The eeprom utility default configuration file.
    EEPROM.TXT          This file.

Usage:
======

    The eeprom menu consists of four functions:                          
                                                                                
    1.  F1: Create Data File
        You should use this function to create a new EEPROM data file.
        The default value of "Ethernet ID", "Subsystem ID", "Subsystem Vendor ID" 
        and "PHY address" are invalid. Modify them to the valid value and 
        save to a file.
                                                                                
    2.  F2: Open Data File
        If you want to modify an existed EEPROM data file, you could use 
        this function.
                                                                                
    3.  F3: Write to EEPROM
        After the EEPROM data file is OK, you could use this function
        to write the data file into EEPROM.
                                                                                
    4.  Esc: Exit
        Exit this program.                                                                                
                                                                                

Command line usage
==================

Usage: EEPROM [option]
option: -?             This help.
        -h             This help.
        -p[#] filename Program EEPROM with data in filename.
                       # : ( 1 ~ 8 ) card number, could be ignored.
                       p file1.nic : Program file1.nic with first adapter.
                       p4 rpl.nic : Program rpl.nic with 4th adapter.
        -v[#] filename Verify EEPROM with data in filename.
                       # : ( 1 ~ 8 ) card number, could be ignored.
                       p file1.nic : Verify file1.nic with first adapter.
                       p4 rpl.nic : Verify rpl.nic with 4th adapter.
        -f[#] filename Write filename with EEPROM data.
                       # : ( 1 ~ 8 ) card number, could be ignored.
                       f file1.nic : Write file1.nic with first adapter.
                       f4 rpl.nic : Write rpl.nic with 4th adapter.
        -e             Display extened menu item.

Exit status:
        0              Command execution success.
        1              Command execution fail.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.11