BIOS Flashing Steps =========================================================================== 1: Make a DOS boot diskette without autoexec.bat and config.sys files. Copy the PHLASH.EXE, PLATFORM.BIN, and unzipped BIOS image(ex.0404.ROM) files to this diskette. 2: Turn the system off, then boot the system using the boot diskette you just created. Then type PHLASH/MODE=3 0404.ROM(say if you wanna to update to rev. 0404) and press [ENTER]. 3: It will now update the flash BIOS. If flash memory has been successfully programmed, it will ask you to press any key to power off the system. If the system does not off, turn the power off then on. 4: Assuming that you have successfully flashed the BIOS. After the system reboots, hit [F2] to enter the CMOS Setup. At this point, go to "Load Setup Defaults" field at "Exit" sub-menu. Then save and exit Setup. If screen resolution has shrunk after you restart, please reset your display resolution to 1024*768 and color to 16 bit.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.