Netware Client32 Driver
Introduction:
-------------
This document describes the procedure to install the NetWare Client32
driver for 10/100M PCI Fast Ethernet Adapter.
Location of Driver: \CLIENT32\RTSSRV.LAN
Sample Configuration Files:
---------------------------
STARTNET.BAT (Client 32 for DOS will contain):
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\NETSRV.LAN FRAME=ETHERNET_802.2
LOAD C:\NOVELL\CLIENT32\NETSRV.LAN FRAME=Ethernet_802.3
LOAD C:\NOVELL\CLIENT32\NETSRV.LAN FRAME=Ethernet_II
LOAD C:\NOVELL\CLIENT32\NETSRV.LAN FRAME=Ethernet_SNAP
A. Driver Installation Procedures on Clien32 for DOS :
------------------------------------------------------
1.If you have completed installed the Netware Client 32 for DOS, all
you have to do is to modify STARTNET.BAT. Please see the sample
STARTNET.BAT above. If not, Please follow the next step 2 - step 7.
2.Run INSTALL.EXE from Netware Client 32 for DOS diskette 1 (or from
Netware 4.11 CD). When the product manual appears, mark the
"Netware Client 32 for DOS" item, then press <Enter>.
3.Select "OTHER DRIVERS" item from "32-bit Network Board Drivers" menu,
then press <Enter>.
4.Insert 10/100M PCI Fast Ethernet Driver Diskette, then specify the
driver path A: or B:
5.Select "10/100M PCI Fast Ethernet driver", then press <Enter>.
6.Following instructions to complete the Client32 for DOS software
installation.
7.Reboot your machine.
Installation Notes:
-------------------
* Installing Multiple LAN Adapters:
The keyword "SLOT" is provided for multiple LAN adapters in a
single server by the driver RTSSRV.LAN. So, add "SLOT" in LOAD
commands. For example:
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD LSLC32.NLM
LOAD CMSM.NLM
LOAD ETHERTSM.NLM
LOAD NETSRV FRAME=Ethernet_802.2 SLOT=1
LOAD NETSRV FRAME=Ethernet_802.2 SLOT=2
B. Driver Installation Procedures on Client32 for Windows 3.x :
---------------------------------------------------------------
Refer to Content A. On step 2, mark "Netware Client 32 for DOS" and
"Client 32 for Windows". On step 4, specify the driver path like
A:\CLIENT32\RTSSRV.LAN , then following step 3..7 to complete the
installation.
C. Driver Installation Procedures on Client 32 for Windows 95 :
---------------------------------------------------------------
If you have installed the Microsoft Client in your Windows 95 system,
you should remove the adapter object & NDIS 2/3 driver of the
adapter from the Windows 95 system. If you have installed previously
10/100M's NDIS 2/3 driver, you should do the following steps
before installing the Client 32 driver. ( Note: If you never
pluged 10/100M PCI Fast Ethernet adapter into your PC, Procedure C.1
is not necessary. And you just start from Procedure C.2)
C.1 Remove the previously installed adapter object & driver of 10/100M
PCI Fast Ethernet Adapter, if any.
-------------------------------------------------------------------
1. Under Windows 95 system directory C:\WIN95\INF\, you should
delete NETRTS.INF, *.BIN files.
2. Click the "My Computer" icon in the Main Program Group.
3. Click the "Control Panel" icon from My Computer window.
4. Click the "System" icon from the Control Panel window.
5. Click the "Device Manager" item.
6. Click the "Network adapter" item from System window.
7. Click the "10/100M PCI Fast Ethernet Adapter" icon from
System window.
8. Click <Remove> button, then click <OK> button.
9. Close the opened windows.
C.2 Driver Installation on Client 32 for Windows 95 :
-----------------------------------------------------
1. Plug 10/100M PCI Fast Ethernet Adapter into your PC machine.
2. Turn the power on to bootup the Windows 95.
3. Windows 95 will then prompt the "10/100M PCI Fast Ethernet
Adapter" in New Hardware Found dialog box.
4. Following instructions to complete the installation, Window 95
will ask you the proper path of the following diskette:
a. Netware Client 32 for Windows 95 Disk
b. 10/100M PCI Fast Ethernet Adapter Driver Diskette:
Insert the Driver Diskette, then, assign the path to
A:\Client32
c. Windows 95 CD-ROM
-- Edward Liu --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.