1. 40002448_A.zip Driver
2. readme.txt File Contents

readme.txt Driver File Contents (40002448_A.zip)

                  Release Notes PN 93000550_A

                     Device Driver Package
                 for Digi's Async PCI Adapters
                  Version 6.0.04.0, 12/19/2004

                     Microsoft Windows 2000
                      Microsoft Windows XP
                  Microsoft Windows Server 2003

                 Software Package PN 40002448_A
 


  CONTENTS

     1. Introduction
     2. Supported Operating Systems
     3. Supported Products
     4. Additional Notes
     5. History


  1. INTRODUCTION

     This document describes the device drivers that support
     the Digi adaptesr listed below.  The drivers are for use
     with Microsoft Windows 2000, Microsoft Windows XP, or
     Microsoft Windows Server 2003.

     Refer to the following number when searching the Digi
     International Inc. Web site (www.digi.com) or the FTP
     site (ftp.digi.com) for the latest software package:

     40002248_<highest revision letter>


  2. SUPPORTED OPERATING SYSTEMS

     Microsoft Windows 2000
     Microsoft Windows XP
     Microsoft Windows Server 2003


  3. SUPPORTED PRODUCTS

     Digi AccelePort 2p Adapter
     Digi AccelePort 4p Adapter
     Digi AccelePort 8p Adapter
     Digi AccelePort 16p Adapter
     Digi AccelePort C/X PCI
     Digi AccelePort EPC/X PCI
     Digi AccelePort Xem PCI
     Digi AccelePort 4r EIA-422 PCI
     Digi AccelePort 8r EIA-422 PCI
     Digi AccelePort 2r 920 PCI
     Digi AccelePort 4r 920 PCI
     Digi AccelePort 8r 920 PCI
     Digi Neo 2
     Digi Neo 4
     Digi Neo 8
     ClassicBoard PCI 4
     ClassicBoard EIA-422 PCI 4
     ClassicBoard PCI 8
     ClassicBoard EIA-422 PCI 8
     Digi Neo 1

     Note: The Digi Neo 1 will install two COM ports in 
      your system. If you connect a standard cable to the 
      DB25 connector on the adapter, only the first COM 
      port will be usable. You may upgrade the Digi Neo 1 
      to a two port adapter by ordering a cable upgrade 


  4. ADDITIONAL NOTES

     On-line help is available when you install the product.

     See also, the following readme files for notes specific
     to each adapter family:

         readme_xp.txt:   AccelePort 2p, 4p, 8p, and 16p.
         readme_fep5.txt: AccelePort C/X, EPC/X, Xem, and Xr.
         readme_neo.txt:  Neo and ClassicBoards.

     Installation documentation can be found at Digi's Web 
     site, http://www.digi.com, or at Digi's FTP server, 
     ftp://ftp.digi.com.


  5. HISTORY

     Version 6.0.04.0, 12/19/2004 (Rev. A)
     -------------------------------------
     o Combined the multiport serial adapters into a single driver
       package with a new part number: 40002448. The combined package
       has been signed by Microsoft's Windows Hardware Quality Labs
       (WHQL).

     AccelePort 2p, 4p, 8p, and 16p adapters:
     o Fixed a bugcheck that occurred at the end of the WHQL Device 
       Path Exerciser test with an AccelePort 16p in Windows Server
       2003.

     AccelePort C/X, EPC/X, Xem, and Xr adapters:
     o Fixed a bugcheck on shutdown when data remains in the 
       transmit queue.
     o Fixed cancel handling of writes.
     o Fixed a bugcheck screen during cleanup while running RTS 
       toggle.
     o Fix to honor former flow control settings on port open.
     o Fix to allow FEP time to handle DTR signal change before 
       the next request.

     Neo and ClassicBoards adapters:
     o Fixed a bugcheck on resume from hibernate.
  

     History for previous driver releases
     ------------------------------------
     See the following readme files for the history specific to each
     adapter family:

         readme_xp.txt:   AccelePort 2p, 4p, 8p, and 16p.
         readme_fep5.txt: AccelePort C/X, EPC/X, Xem, and Xr.
         readme_neo.txt:  Neo and ClassicBoards.