WINXP.TXT Driver File Contents (NF100.zip)

****************************************************************************
		    Gene Ethernet Controller Provider Inc.     
		       10/100 Mbps Fast Ethernet PCI Adapter              

	      NDIS 5 Miniport Driver For Windows XP Installation
	      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

	   Copyright (C) 2000 Gene Ethernet Controller Provider Inc.     
			     All rights reserved.
****************************************************************************

The driver conforms to the Network Driver Interface Specification (NDIS)5.0,
and used with Microsoft Windows OS.


Contents
--------
    A) Install NDIS5.0 Miniport driver to Microsoft Windows XP
    B) Configure NDIS5.0 Miniport driver to Microsoft Windows XP
	

A)Install NDIS5.0 Miniport driver to Microsoft Windows XP
=========================================================
Importance:
  Because our NDIS5.0 driver had build-in the Windows XP CD. So, here have 2
  way to install the NDIS 5 driver;

  First way: 
     You just plug the 10/100 Mbps Fast Ethernet PCI Adapter into the PCI slot of              
     your machine. Then power on the machine, the system will auto install 
     its driver.

  The other way:
     If you want to use the driver in diskette. First, you must deleted the 
     NETAN983.INF and NETAN983.PNF file at safe mode(Don't plug the NIC into 
     machine). Then shutdown the system and trace the following to install 
     driver.
  1. Plug the 10/100 Mbps Fast Ethernet PCI Adapter into one of the Master PCI               
     slots of your PCI platform.

  2. Turn on the power of PC then boot into Windows XP.

  3. Windows XP will prompt "PCI Ethernet Controller" in "New Hardware 
     Found" dialog box.

  4. Select "Search for suitable driver for your device(Recommand)" from 
     "Found New Hardware Wizard" dialog box, then click "Next" button.

  5. Select "Specify a location" from "Found New Hardware Wizard" dialog box
     , then click "Next" button.

  6. Insert the 10/100 Mbps Fast Ethernet PCI Adapter Driver Diskette in your               
     floppy drive.

  7. Enter the driver pathname, i.e. A:\winXP (or B:\), then click "OK" 
     button from "Found New Hardware Wizard" dialog box.

  8. "Found New Hardware Wizard" dialog box will find inf file.
     i.e. A:\WINXP\NETAN983.INF, then click "Next" button.  

  9. Windows XP will prompt; "ADMtek AN983 10/100Mbps PCI Adapter" in "Found              
     New Hardware Wizard" dialog box, then click "Finsh" button.

 10. Windows XP will prompt "New Connection" Wizard diag box, then click 
     "Next" button.

 11. You can Modify or Add your LAN protocol or LAN Service... form "LAN
     Wizard", and click "Next" button to continue.

 12. Type a name you want for this connection form "LAN Wizard" diag box,
     and click "Finsh" button.

 13. Remove the 10/100 Mbps Fast Ethernet PCI Adapter Driver Diskette from your               
     floppy drive.

 

B) Configuring NDIS5.0 Miniport driver to Microsoft Windows XP
==============================================================
  1. Click the "My Computer" icon in the Main Program Group.

  2. Click the "Control Panel" icon from My Computer window.

  3. Click the "Network and Dial-up Connections" icon from the Control 
     Panel window.

  4. Select "ADMtek AN983 10/100Mbps PCI Adapter" item from "Network" dialog               
     box, then click "Properties" button.

  5. Press "Configure" key.

  6. Click "Advanced" button from "ADMtek AN983 10/100Mbps PCI Adapter Properties"               
     dialog box.

  7. Select the Media Type value (AutoDetect, 10BaseT, 10BaseT Full_Duplex,
     100BaseTX, 100BaseTX Full_Duplex) from "Value" item, then click OK 
     button from "10/100 Mbps Fast Ethernet PCI Adapter Properties" dialog box.              

  8. Click OK button from "Network" dialog box.




Trademarks:
Microsoft Windows XP is a trademark of Microsoft Corporation.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.44