****************************************************************************
10/100Mbps Fast Ethernet PCI Adapter
UnixWare7 Driver Installation
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
****************************************************************************
Installation Procedure
======================
1. Login to UNIX system as supervisor (root) and enter the Maintenance mode.
(Note: Make sure that the current directory is "/"
using UNIX command - pwd.)
Please follow the following steps to copy and install the Driver:
# mkdir /temp
# cd /temp (and inserts the package floppy in the proper drive, i.e. a:)
# mkdir floppy (Please be sure the directory is in /mnt.)
# mount -F dosfs /dev/fd0 /mnt/floppy
(mount the floppy drive for copying drivers. Perhaps you may use the AUI
in the UnixWare 7 OS. Sco Admin-> Filesystem Manager-> Mount-> Add mount
configuration-> Local.)
Note: Prepare the driver diskette without read-only.
# doscp a:/unixware7/nd02x.pkg /temp
# pkgadd -d /temp/nd02x.pkg
2. Run "netcfg". And follow the belowed instructions:
a. Add new LAN adapter ( 10/100Mbps...) after select "Hardware"
in the "Network Configuration Manager".
b. Click "Continue". And add the protocol that your network using.
c. Click "Ok" while disappearred "Configure networking product" dialogue.
d. Exit the "Network Configuration Manager".
3. reboot the UnixWare system.
4. Be sure the NIC loaded. Type-in "ifconfig -a" to check the adapter loaded or
not. (For example: lo0 or net0...)
5. Remove the package driver, please type this instruction.
# pkgrm ND02
# netcfg (Into the "Network Configuration Manager" windows, please select
"Remove network device".)
RECORD OF REVISIONS FOR DRIVER RELEASES
=======================================
Release Number/ Changes
Date
----------------------------------------------------------------------------
V1.01
05/11/1999 New Release
----------------------------------------------------------------------------
V1.2
04/11/2001 1. remove eeprom access
2. set csr18 bit0 = 1
----------------------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.