NWODIDOS.TXT Driver File Contents (ND010w.zip)

   Workstation for DOS ODI Client

   This document describes the procedure to setup the NetWare v3.X , v4.X
   workstation driver for Unex ND01X Ethernet/Fast Ethernet PCI Bus adapter.

   Location of Driver:  \NWCLIENT\DOS\ND01XODI.COM (diskette) or
                        \DRIVERS\NIC\ND01X\NWCLIENT\DOS\ND01XODI.COM (CD-ROM)

   Sample Configuration Files:
         NETX or VLM (VLM's for NetWare 4.x )


         ;  BUSNO NN   --where NN is the PCI bus identifier of the PCI bus
         ;               which connectsto the adapter.
         ;  DEVICENO NN --where NN is the specific PCI BIOS device
         ;                identification number of the specified PCI adapter.
         ; [ or you can use "EtherID" to select a specific ND01X adapter:
         ;  EtherID NNNNNNNNNNNN --Where NNNNNNNNNNNN specify a ND01X
         ;                         adapter's node address.This is only
         ;                         required when more than one ND01X
         ;                         adapters exist on one system.
         ; ]

           FRAME Ethernet_802.2 --Specify frame type
           FRAME Ethernet_802.3
           FRAME Ethernet_SNAP
           FRAME Ethernet_II

         NetWare DOS Requester
         ;  PREFERRED SERVER = NW411

   Setup Procedures for NetWare 3.11/3.12 Client :
      Before you start with the installation process, make sure that
      the  adapter is properly installed and configured. Make sure
      that your NetWare workstation is properly installed.

      1. Copy  ND01XODI.COM from the Unex Driver Diskette subdirectory
         A:\NWCLIENT\DOS to your harddisk.

      2. Create a batch file, or add to your STARTNET.BAT file the commands
         listed above under STARTNET.BAT

      3. Edit the NET.CFG file that you copied over. Edit the file per your
         requirements (see examples above).  If there are two frame types
         listed, whichever frame type is listed first, that is the one that
         the  driver will load.  See above for examples.  The NET.CFG file
         should be in the same directory with the LSL.COM file.

   Setup Procedures for NetWare 4.X Client with vlm:
      The  installation utility  INSTALL.EXE  is  located on NetWare's
      "Workstation for DOS" disk. Run INSTALL.EXE from the Workstation
      for DOS Disk.

      The NetWare Client Install program screen will appear.  You must
      complete each of the questions.  These options are specific to your

      1. Enter the destination directory for the NetWare Client.
         (The default directory is C:\NWCLIENT).

      2. Gives you the option to automatically update the CONFIG.SYS
         and the AUTOEXEC.BAT files or modify them at a later time

      3. Do you wish to install support for MS Windows ? (Y/N)
         (MS Windows Subdirectory: default C:\WINDOWS)

      4. Asks you to select a network driver and provide  configuration
         options.  It uses  the specifications you select to create the
         file NET.CFG. Insert the Unex drivers disk when prompted for
         the driver disk and specify the driver path A:\NWCLIENT\DOS

      5. Press <Enter> to install

      1. Be sure to add LASTDRIVE=Z to your CONFIG.SYS file for the
         network mappings to work properly.

      2. When you have multiple ND01X Adapters on your system:
         Use "BUSNO" and "DEVICENO" KEYWORD in NET.CFG to select which
         adapter to use with your netware client.(or you can use "EtherID")

                                        -- Unex Technology Corporation --

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.05