OEM Scanlogic Release notes for USB2IDE, CompactFlash, SmartMedia, and Combo Date:12/26/00 --------------------------------------------------------------------------- Firmware names: - cide26.bin ; USB2IDE - cf63.bin ; CompactFlash and Micro-drive - ssfdc.bin ; SmartMedia - sfd63.bin ; Combo (CompactFlash + SmartMedia) --------------------------------------------------------------------------- Drivers : usb2ide.sys ver. 2.6 usbmpd.mpd ver. 2.6 --------------------------------------------------------------------------- I- Combo software Rev 0.6: - Support Subclass = 6 for bootable from USB Device(*) - Support Write Protect on MAC - Firmware support two ICONs for WinME and Win2K - Support Standard Low Level Format for SmartMedia - Supports USB BULK Transport Protocol and UFI commands - Supports both Windows and MAC multiple partitions - Supports SmartMedia 2M-128M Bytes Media - Supports CompactFlash 2M Bytes or higher Media - Firmware and driver support both Micro-Drive - Improve transfer Speed for both SmartMedia and CompactFlash - Improved Plug and Play operation - Supports BIOS bootable from Mass Storage Device Class WARNNING: - CAN NOT REMOVE OR INSERT MEDIA WHILE OTHER FLASH ACCESS. - (*) The MAC Driver is using version 20F3. --------------------------------------------------------------------------- II- USB2IDE Sofware Rev in 2.51 - Support Multiple devices - Fix writing for LS120 08/24/00 Rev 2.4 - Supports USB BULK Transport Protocol and UFI commands - Supports both Windows and MAC multiple partitions - Supports BIOS bootable from Mass Storage Device Class 05/30/00 Rev 2.3 - Support Windows 2000 multiple partitions 04/06/00 Rev 2.2 and pior release - New firmware to support more ATAPI/IDE Devices - Improved transfer rate - Improved ATAPI/IDE error handling - Firmware supports MAC OS8.6 and OS9 - Support Multi ports support for Bulk Storage device class. --------------------------------------------------------------------------- III- Update firmware: - You need to remove previous version before run setup.exe USB2IDE: - Connect USB2IDE board to IDE/ATAPI devices - Click [Start]->[Programs]->[ScanLogic]->usb2ide.bat ; IDE/ATAPI solution * - Follow MS-DOS screen to complete update firmware USB2CompactFlash: - Connect CompactFlash board to PC - Click [Start]->[Programs]->[ScanLogic]->compactF.bat ; Single CompactFlash** - Follow MS-DOS screen to complete update firmware USB2SmartMedia: - Connect SmartMedia board to PC - Click [Start]->[Programs]->[ScanLogic]->ssfdc.bat ; Single SmartMedia - Follow MS-DOS screen to complete update firmware Combo: CompactFlash + SmartMedia (CFSM) - Connect Combo board to PC - Click [Start]->[Programs]->[ScanLogic]->combo.bat - Follow MS-DOS screen to complete update firmware Note: * IDE/ATAPI devices include HD, CD-ROM, CD-WR, ZIP, MO, and CLiCK ** This firmware designs for CompactFlash which acts like Floppy Disk --------------------------------------------------------------------------- IV- Drivers The drivers is in the directory C:\Program Files\ScanLogic\USB2IDE\SYS \Win98 ; This is for Win98 and ME \Combo_2K ; This is for Window2000 Combo Device ONLY ------------------------------------- Mass storage Device Drivers include: Win98: - usbdev.inf - usbide.inf - usb2ide.sys - usbmpd.mpd ------------------------------------- WinME: - usbstor.inf ; Microsoft Inf file - usbstor.sys ; Microsoft Mass storage driver. ------------------------------------- Beta version Win2k: - usb2k.inf ; Microsoft Inf file - usbstor2.sys ; Beta version. ---------------------------------------------------------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.