Scanlogic Release notes: Date:1/12/99
-------------------------------------------------------------------------
Jan/12/99 Rev 2.0
Enhancements in 2.0
-Master/Slave autoselection
-IDE and ATAPI in one firmware cide00.BIN
-Improved FW speed, so works at 4X on more machines
-USB device will not appear until Valid, working device attached
Fixes in 2.0
-Added 10Sec delay to remove HDD from MAC without crash
-Fixed ADAPTEC CDcreator 4.0, NERO and WinonCD CDRW software
-Fixed "fdisk" command for create and delete partition
Known problems with 2.0
-Certain ACER CDRW drives have a problem with Cdwrite. This will be
fixed in the next release.
Dec/6/99 Rev 1.4
Fixes in 1.4
- Improved Plug and Play operation
- Improved CDrw performance.
- Improved error handling.
Known problems with 1.4
- Some Netgear network cards (specifically ver 310Tx) have a driver
bug that conflicts with the use of USB in Win98.
Nov/28/99:
- Firmware supports MAC OS9
- Fix on MAC OS8.6 and OS9 boot-up and MAC windows freeze
Nov/26/99:
- Fix >640MB Read/Write hang problem for MO
- Build-in reset circuit.
- Supports >12GB LBA HDD
Nov/24/99:
- Release hardware supports GPIO mode. This mode is true
ATAPI/IDE timming which support more ATAPI/IDE devices.
Oct/27/99:
- New firmware to support HDD and Compact Flash card for
GPIO Hardware.
- Firmware supports OS 8.6
Oct/22/99:
- New release for Multi port support for Bulk Storage device
class.
Oct/14/99:
- New firmware to support HDD and Compact Flash card for
xMEM interface old Hardware.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.