;/*************************************************************************\ ; ** Copyright (C) 1997-2000 Motorola. All rights reserved ** ; ** http://www.motorola.com ** ; ** This file is the installation file for the Motorola SB4100 USB ** ; ** Cable Modem SB 4100 ** ;\*************************************************************************/ [version] Signature = "$Chicago$" Class = Net ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318} Provider = %MOT% Compatible = 1 ; works with Win2K and Win9x DriverVer = 09/15/2000, 1.4.0.0 CatalogFile = net4100.cat ;LayoutFile = layout.inf [Manufacturer] %MOT% = MOTOROLA [ControlFlags] ; Provides limited control on UI dispalys and events during installation. ; Must for any device on an enumerable BUS like USB ExcludeFromSelect = USB\VID_07B2&PID_4100 [MOTOROLA] ; ; Display Name Section DeviceID ;_________________________________________________________________ %ndiscm.DeviceDesc% = ndiscm.ndi, USB\VID_07B2&PID_4100 ; Windows 98 specific entry [ndiscm.ndi] AddReg = ndiscm.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg DeviceID = "USB\VID_07B2&PID_4100" ;LogConfig = DefaultConfig ; Windows 2000 specific entry [ndiscm.ndi.NT] Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI ?? BusType = 15 ; USB AddReg = common.reg, ndiscm.nt.reg ; CopyFiles = ndiscm.nt.CopyFiles ; [ndiscm.ndi.nt.Services] AddService = ndiscm, 2, ndiscm.Service, common.EventLog ;---------------------------------------------------------------------------- ; Win9x id registry sections ; These are not needed by NT [ndiscm.id.reg] HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_4100" ;----------------------------------------------------------------------------- ; common registry entries [common.reg] HKR, Ndi\params\ByteSwapFlag, ParamDesc, 0, "Byte Swap Flag" HKR, Ndi\params\ByteSwapFlag, default, 0, "ByteSwapFlag=0" HKR, Ndi\params\ByteSwapFlag, type, 0, "edit" HKR, Ndi\params\ByteSwapFlag, LimitText, 0, "128" HKR, Ndi\params\ByteSwapFlag, UpperCase, 0, "0" ;----------------------------------------------------------------------------- ; WIN2K (NT) specific [ndiscm.nt.reg] HKR, Ndi, Service, 0, "ndiscm" ; use ndis5 as the upper bound because NT supports it ;HKR, Ndi\Interfaces, DefUpper, 0, "ndis5" ;HKR, Ndi\Interfaces, DefLower, 0, "ethernet" HKR, Ndi\Interfaces, UpperRange, 0, "ndis5" HKR, Ndi\Interfaces, LowerRange, 0, "ethernet" [ndiscm.Service] DisplayName = %ndiscm.Service.DispName% ServiceType = 1 ;%SERVICE_KERNEL_DRIVER% StartType = 3 ;%SERVICE_DEMAND_START% ErrorControl = 1 ;%SERVICE_ERROR_NORMAL% ServiceBinary = %12%\Net4100.sys LoadOrderGroup = NDIS AddReg = TextModeFlags.reg [common.EventLog] AddReg = common.AddEventLog.reg [common.AddEventLog.reg] HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll" HKR, , TypesSupported, 0x00010001, 7 [TextModeFlags.reg] HKR, , TextModeFlags, 0x00010001, 0x0001 ;---------------------------------------------------------------------------- ; Win9x specific ; [ndiscm.flag.reg] ; flag is not needed by NT HKR, Ndi\params\ByteSwapFlag, flag, 1, 20,00,00,00 [ndiscm.9x.reg] HKR, , DevLoader, 0, "*ndis" HKR, , DeviceVxDs, 0, "Net4100.sys" HKR, , EnumPropPages, 0, "netdi.dll,EnumPropPages" ; memphis appears to not support the ndis5 upper range, so use ndis3 HKR, Ndi\Interfaces,DefUpper, 0, "ndis3" HKR, Ndi\Interfaces,DefLower, 0, "ethernet" HKR, Ndi\Interfaces,UpperRange, 0, "ndis3" HKR, Ndi\Interfaces,LowerRange, 0, "ethernet" HKR, NDIS, LogDriverName, 0, "Net4100" HKR, NDIS, MajorNdisVersion, 1, 03 HKR, NDIS, MinorNdisVersion, 1, 0A HKR, Ndi\Install, ndis3, 0, "ndiscm.install" [ndiscm.install] CopyFiles = ndiscm.9x.CopyFiles ;----------------------------------------------------------------------------- ; DestinationDirs ; [ndiscm.nt.CopyFiles] Net4100.sys,,,2 [ndiscm.9x.CopyFiles] Net4100.sys,,,2 [DestinationDirs] ndiscm.nt.CopyFiles = 12 ndiscm.9x.CopyFiles = 11 [SourceDisksNames] 1 = "USBCM",net4100.sys.sys,, [SourceDisksFiles] net4100.sys = 1 [Strings] MOT = "Motorola" ; String that gets displayed while installing the device ndiscm.DeviceDesc = "Motorola SurfBoard USB Cable Modem SB4100" ; NT Service name ndiscm.Service.DispName = "Motorola SurfBoard USB Cable Modem SB4100 Windows 2000 Driver"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.