1. Driver_CXC150_CXC3xx_1.0.2.25_WHQL.zip Driver
2. netcticm.inf File Contents

netcticm.inf Driver File Contents (Driver_CXC150_CXC3xx_1.0.2.25_WHQL.zip)

;============================================================================
;   Installation file for Conexant Based ( CN94 Series ) External USB Cable Modem
;
;============================================================================

[version]
Signature   = "$Chicago$"
Class       = Net
ClassGUID   = {4d36e972-e325-11ce-bfc1-08002be10318}
CatalogFile = netcticm.cat
Provider    = %P_CN94_Series%
DriverVer   = 01/23/2002, 1.0.2.25
Compatible  = 1                    ; works with Win2K and Win9x

[Manufacturer]
%V_MANUFACTURER% = CN94_Series

[CN94_Series]
;
; Display Name              Section           DeviceID
;_________________________________________________________________
%ndiscm.DeviceDesc% =   ndiscm.ndi,       USB\VID_0BA8&PID_0110

[ControlFlags]
;
; Provides limited control on UI displays and events during installation.
; Must for any device on an enumerable bus like USB
;
ExcludeFromSelect = USB\VID_0BA8&PID_0110
;
; Windows 98 specific entry
;
[ndiscm.ndi]
AddReg = ndiscm.id.reg, ndiscm.9x.reg
CopyFiles       = ndiscm.9x.CopyFiles

;
; Windows 2000  specific entry
;
[ndiscm.ndi.NT]
Characteristics = 0x84                       ; NCF_PHYSICAL | NCF_HAS_UI ??
BusType         = 15                         ; PNPBus
AddReg          = ndiscm.nt.reg
CopyFiles       = ndiscm.nt.CopyFiles

[ndiscm.ndi.nt.Services]
AddService = ndiscm, 2, ndiscm.Service, common.EventLog

;----------------------------------------------------------------------------
; Win9x id registry sections
; These are not needed by NT
;
[ndiscm.id.reg]
HKR, Ndi, DeviceID, 0, "USB\VID_0BA8&PID_0110"
;-----------------------------------------------------------------------------
; WIN2K (NT) specific
;
[ndiscm.nt.reg]
HKR, Ndi,                       Service,    0, "ndiscm"
; use ndis5 as the upper bound because NT supports it
HKR, Ndi\Interfaces,            DefUpper,   0, "ndis5"
HKR, Ndi\Interfaces,            DefLower,   0, "ethernet"
HKR, Ndi\Interfaces,            UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces,            LowerRange, 0, "ethernet"

[ndiscm.Service]
DisplayName     = %ndiscm.Service.DispName%
ServiceType     = 1 ;%SERVICE_KERNEL_DRIVER%
StartType       = 3 ;%SERVICE_DEMAND_START%
ErrorControl    = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary   = %12%\netcticm.sys
LoadOrderGroup  = NDIS
AddReg          = TextModeFlags.reg

[common.EventLog]
AddReg = common.AddEventLog.reg

[common.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported,   0x00010001, 7

[TextModeFlags.reg]
HKR, , TextModeFlags, 0x00010001, 0x0001


;----------------------------------------------------------------------------
; Win9x specific
;
[ndiscm.9x.reg]
HKR, ,              DevLoader,          0, "*ndis"
HKR, ,              DeviceVxDs,         0, "netcticm.sys"
HKR, ,              EnumPropPages,      0, "netdi.dll,EnumPropPages"
; memphis appears to not support the ndis5 upper range, so use ndis3
HKR, Ndi\Interfaces,DefUpper,           0, "ndis3"
HKR, Ndi\Interfaces,DefLower,           0, "ethernet"
HKR, Ndi\Interfaces,UpperRange,         0, "ndis3"
HKR, Ndi\Interfaces,LowerRange,         0, "ethernet"


HKR, NDIS,          LogDriverName,      0, "NDISCM"
HKR, NDIS,          MajorNdisVersion,   1, 03
HKR, NDIS,          MinorNdisVersion,   1, 0A

HKR, Ndi\Install,   ndis3,              0, "ndiscm.install"

[SourceDisksNames]
1 = %Disk1%,,,

[SourceDisksFiles]
netcticm.sys = 1

;-----------------------------------------------------------------------------
; DestinationDirs
;
[ndiscm.nt.CopyFiles]
netcticm.sys,,,2

[ndiscm.9x.CopyFiles]
netcticm.sys,,,2

[DestinationDirs]
DefaultDestDir = 10,System32\Drivers
ndiscm.nt.CopyFiles = 12
ndiscm.9x.CopyFiles = 11

[Strings]
P_CN94_Series  = "CN94_Series"
Disk1    = "Installation disk 1"

;
; String that gets displayed while installing the device
;
ndiscm.DeviceDesc = "External USB Cable Modem"

;
; NT Service name
;
ndiscm.Service.DispName = "External USB Cable Modem NT Driver"
V_MANUFACTURER = "CN94_Series"