FLASH Memory Update Utility Release 3.0 This utility is used to save and update FLASH memory. It is recommended that this utility be executed from a bootable MS-DOS diskette that contains BIOS recovery files for the target system. This utility must be executed in a system without memory managers installed. If EMM386, QEMM, 386MAX, or Windows is active, then the FLASH update is not safe. Remove any memory manager or exit Windows before executing the FLASH Memory Update Utility. It is strongly recommended that you record your CMOS SETUP parameters before updating the BIOS and set the CMOS parameters to default values after the update is complete. You can set the CMOS parameters to default values by entering SETUP and hitting the <F5> key. The CMOS memory map may change from BIOS version to BIOS version, setting the parameters to default values will guarantee the CMOS memory is updated correctly. SHOWHDR.EXE: This tool is provided to display header information on the specified FLASH data image. Usage: SHOWHDR.EXE <FLASH data image filename>Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.