============================================================================= Intel(R) Server Platform SE7520AF2 BMC Release Notes ============================================================================= INTEL Enterprise Platform & Services Marketing Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ============================================================================= DATE: June 14th, 2005 TO: Intel(R) server platform SE7520AF2 customers SUBJECT: BMC(R) 0.48 Release Notes ============================================================================= LEGAL INFORMATION ============================================================================= Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (c) 2005 Intel Corporation. ============================================================================= ABOUT THIS RELEASE ============================================================================= REVISION INFORMATION RETURNED BY GET DEVICE ID COMMAND: Operational mode: v00.48 Flash update mode: v00.11 PIA data: v01.68 Manufacturer ID: 0x000157 (Intel) Product ID: 0x0021 (SE7520AF2) Checksum Information: Operational Code Region: 0x00030000 -> 0x000d9e2a Checksum: 0x6038 Boot Block Region: 0x00000000 -> 0x00003052 Checksum: 0x543b ============================================================================= SYSTEM HARDWARE REQUIREMENTS/REVISIONS ============================================================================= Intel(R) Management Module(IMM): - Professional Edition PBA C46194-403 or higher - Advanced Edition PBA C44973-405 or higher with BMC 0.23 or higher installed Advanced Edition NIC board (GCM): PBA C44941-201 (or later) Server Board SE7520AF2: - All production versions. ============================================================================= SYSTEM SOFTWARE REQUIREMENTS/REVISIONS ============================================================================= - SE7520AF2 BIOS release: SE7520AF20.86B.P.05.00.0089.111820041911 (or later) Any BIOS version prior to this will cause the BMC serial channel to not function properly. - SE7520AF2 FRU/SDR pacakge: AF-6.6.2 (or later) - PC87431M mini-Baseboard Managment Controler (mBMC) from NSC: Revision 2.40 (or later) - Firmware revisions on the Advanced Edition IMM card: FPGA : rev 47 or later EDID: rev 04 Any version prior to these will cause the Keyboard and mouse to become non-functional. The KVM viewer applicaton will also not function properly with earlier FPGA versions. ============================================================================= IMPORTANT INSTALLATION NOTES ============================================================================= - The following files are necessary to update the firmware: Run.bat - Batch file used to update the firmware 7520AF48.hex - BMC firmware hex file for the SE7520AF2 platform efs_122.efs - EFS Web Server efs image for IMM Advanced Edition efs_122.hex - EFS Web Server hex file for IMM Advanced Edition FWPIAUpd.exe - DOS utility to program FW hex file into the flash device Prior versions of this utility will not work with this FW Executing the fwpiaupd utility with your own command switches is unsupported and may leave your baseboard in a non-operational state! Please use the provided batch file to update the firmware. Executing the batch file can be done from any media (Hard disk, USB disk-on-key, shared network drive or floppy). BMC 0.23 or later must be preinstalled. If this is not the case, please update the IMM firmware to BMC 0.23 before updating to this release. All production IMM units are shipping with FW older than version 0.23. The boot block has been changed with the BMC 0.31 release but it is not required for this release. The batch file provided with this BMC package does not update the boot block. ============================================================================= INSTALLATION PROCEDURE ============================================================================= - If this update is not being applied to BMC 0.23 or later, please update to 0.23 before running this update. - Apply AC and power on the server. - Execute the run.bat file to begin the firmware update process (if running from the Software Update package, select update IMM Firmware option). - Proceed to install the latest FRU/SDR package and/or other update components instructed by the Software Update Package. ============================================================================= KNOWN ISSUES/WORKAROUNDS ============================================================================= - Power cycle operations to reset the system should not be used after an OFU is registered. Rather, use CLI resets or similar. - Please clear the web browser cache if the web server feature was used prior to BMC 0.37 as these cached pages will conflict with the pages generated with versions after BMC 38 and EFS content rev 1.12. The clearing of the web browser cache need only be done once. ============================================================================= FEATURES ADDED ============================================================================= BMC 0.47: - None BMC 0.46: - None BMC 0.45: - None BMC 0.43: - None BMC 0.32: - None BMC 0.31: - None BMC 0.30: - None BMC 0.29: - None ============================================================================= ISSUES FIXED ============================================================================= BMC 0.48: -21113 Enable 1MHz I2C speed on FPGA -20049 Clicking the 'last' button displays incorrect number of records per page. -20144 Incorrect 'Available entries' on the SEL pages -20123 Clicking on 'Previous' button displays incorrect no. of entries from last page. -20210 HTTP: Incorrect SEL percentage displayed on both the SEL pages -20664 CLI overwrites commands when connected on a embedded telnet session -19661 BMC21/Telnet: Backspace is causing error in telnet -42163 KVM support info in FW not correct -40056 ARP suspension occurs even when the watchdog is restarted -40234 apiKey.tcl:1: Set Channel Security Key not implemented -41691 Junk characters showed in the screen while the systems is booting -41885 Telnet/CLI: missing space in interrupt help -41888 Telnet/CLI: interrupt command not functional -40132 BMC21/Telnet: Prompt setting is not working in telnet BMC 0.47: - 42200 Fix for #20373 created another issue (DR#42200) which has been resolved - 42362 A memory leak in the web server has been resolved - 19930 Self test errors with IMM Pro; changes that are made for the NCR SOL issue - 74804 SC5300LX chassis with HS fans, Front Panel LED fault light lighting, either blinking RED, solid RED,or amber with no SEL error message being written BMC 0.46: - 19438 Invalid Chassis information and Asset tag in the 'System Summary' page. - 19850 Host and domain name updates not successful. - 19878 Gateway IP not getting reflected on the Summary page. - 20076 False front panel temp lower critical events generated - 20194 BMC TAM WDT alarms being cleared on power off - 20373 When user creates a session with USER access, they can run any admin command - 41879 Telnet/CLI: entering character after valid password "IPMI Session Error" - 41920 No LAN functionality - 42158 Watchdog timer test causes FRB timeout failure - 76154 POST Codes Not Driven by SIO on UUT3 BMC 0.45: - 41857 Power On/Off (warm reset) test hangs at Post Code 13 or F8 BMC 0.43: - 20229 HTTP: 'Configuration' page fields could be set with 'User' privilege level. BMC 0.42: - 16837 FW: User Feature cmd for HTTP/S enables returns incorrect # of data bytes - 20132 BMC fails self test err #8300 - 20140 Multiple email alerts are observed for single SEL entry - 20213 SCW: Some errors are observed at the end of SCW configuration. - 20307 Telnet: Invalid Password leads to BMC reset BMC 0.41: - 20173 HTTP: Changing UsrUrl2 adds special characters - 41534 SNMP: SNMPGet of SDR returns wrong values - 41678 SMTP: Two emails received for the same event BMC 0.40: - Various KVM fixes 20078, 19376, 19690, 19377 BMC 0.39: - Various SEL issues fixed 19933, 19956, 19958, 19959, 19654, 19882, 19937, 19882, 19723, 19454, 19402, 19647 19452 - 19073 BMC not responding going across sub-nets for Intel(R) Management Module - Advanced Ed. - 19844 CGI config byte reset to 00 - 19846 Web server hangs when choosing ""Clear SEL"" on the page. - 19827 Embedded CLI/SOL functionality is inconsistent and does not display correctly - 19891 SNMP Enable bit resets with power cycle - 19860 BMC38/Telnet: telnet and HTTP are not working when telnet port is changed - 19861 PS1 Status on the Summary page shows ""Inst"" for ""Installed"". - 19880 BMC38/Telnet: login propmt should not come when all 4 telnet sessions are active - 19850 Host and domain name updates not successful. - 19878 Gateway IP not getting reflected on the Summary page - 19879 Host name and Domain name should be clear on the Summary page. - 19438 Invalid Chassis information and Asset tag in the "System Summary" page. - 19880 BMC38/Telnet: login propmt should not come when all 4 telnet sessions are active - 19881 BMC38/Telnet: BMC has become busy(CC is 0xC0), not coming out of this state - 74756 FAN 5 and FAN 6 sensor numbers gets swapped when IMM is installed - 19862 Alerts not generated for configured filters - 39766 SDR Clear does not cancel reservation - 38098 SDR EraseTime timestamp Is Not Expected Time Value - 74762 Sometimes BMC will disable event messages from threshold type sensors after A/C off then on - 19840 Unnecessary characters appear on the left panel in Mozilla. - 19907 SOL: Accepted Character Count field is wrong. - 19969 embedded web server gives error if cli is accessing the BMC - 20038 DC power cycling is causing network stack to become unavailable. - 41353 Telnet 'power -console' fails to show server screen - 41588 SNMP fails to change ports - 76000 FRB2 was not disabling the BSP when the SEL log was full - 19912 System fails to boot with SC5300 Base SKU, P06 BIOS & IMM - 19888 Fix for data entry format in the IPMI command window. It now accepts things like "20 18 1" as well as "20 18 01". - 20041 Enabled the ability to write to the power unit and power supply FRU devices BMC 0.38: - 17571 HTTP web server about link causes error - 19558 IMM Status LED does not return to green from amber - 19616 Fan status LED does not go out after hot swap fan is repaired - 19628 BMC35/Telnet: Telnet is not working for any other port - 19659 Wrong "Current power state" shown on the "Power Control" page - 19678 Embedded web server "Help" link is broken - 19679 Unexpected character on web server summary page - 19682 Dislplay IMM GCM NIC gateway and subnet mask on summary page - 19690 Web Server SEL View erratic - 19737 Unable to telnet for user1 when password is reset - 19801 Event receiver not set correctly in SATA HSBP after AC cycle - 19824 Inconsistent mouse and keyboard control on KVM - 19825 Power cycling on can cause the BMC to not allow further connections - 19826 Logging into embedded CLI while KVM enabled causes BMC reset - 19828 Embedded CLI Banner still reads Sahalee BMC Embedded Telnet - 19833 Updating NIC configuration during Telnet Session stops LAN interface - 19836 Sessions and stress test issues with the web server BMC 0.37: - Various Embedded Web Server Fixes, 19439, 19497, 19534, 19670, 19677, 19678, 19679, 19680, 19681 19683, 19684, 19690 - 19732 HTTP does not work for any port other than 80 - Sensors that are valid only while DC is on were being scanned while DC was off. BMC 0.36 - 39809 Added new signals in MCH driver - Moved creation of new command tables to external RAM due to running out of internal RAM. BMC 0.35 - Various Telnet issues fixed, 19444, 19468, 19493, 19446 - 19488 BMC Prochot monitoring by BMC not reliable - Fix for mouse and keyboard getting disabled during system reboot or reset. - Front Panel reset button not getting locked in Sleep S1state BMC 0.34 - 19530 Get HTTP Configuration Parameters-- Parameter Revision is not 0x11 - 19485 BMC to emulate keyboard / mouse correctly on Microsoft Windows* 2003 - 19494 Key Board Gets Disabled on Microsoft Windows* 2000 - 39476 Serial over LAN recieved unexpected successful response BMC 0.33 - HTTP web server fixes - 17503 Get SNMP Config Params command returns bad completion code - 39454 SMI timeout does not work - 39489 OEM1 bit is un-settable - Fixed KVM issues - 18215 Init Agent fails to initialize the sensor thresholds - 16670 HTTP Power Webpage, timestamp needs to be updated - 19402 SEL page in EFS content rev 1.6 has errors BMC 0.32 - 17950 Boot Initator info block - 19398 PDB failure status not logged by BMC - 15895, 16213, 16597, 16840, 17179, 18805, 19246, and 19321 Miscellaneous HTTP web server fixes BMC 0.31 - 16325 EMP is not available for 10 seconds after DC ON - 18410 Communication failure in Terminal mode - 19027 Failed to make direct serial connection (LSM) - 19028 Failed to establish Serial Modem Connection (LSM) - 19031 SecureModeActive bit is not set by the Secure Mode KB signal. - 19306 CRERR04 - during console redirection and EMP is enabled - 19363 SMTP -Parameter Revision is not 0x11 - 19369 SMTP config parm#6, DNS override, inverted - 75975 BMC did not lock the Power and Reset push-buttons when Secure Mode signal is asserted. BMC 0.30 - 15819 IPMI2.0 commands not implemented correctly - 16415 Get Video Status requires video data structure - 16634 Setting an SMTP configuration appears to set multiple configurations - 16837 User Feature cmd for HTTP enables returns incorrect # of data bytes - 17186 Get Channel Payload Support responses the same output - 17459 Set KVM Config. to set in progress results in invalid completion code - 17460 Configuration to disable KVM does not work - 17501 Activate Payload not returning all required bytes - 17502 Video Status incorrectly reported when powered off - 17503 Get SNMP Config Params command returns bad completion code - 17538 Issues with Set SMTP Config Params command - 17540 Issues with Set/Get LAN Config Params cmd w/ parameter 0xc4 - 17773 No Video Data Received - 17779 Video packets still sent after Payload Deactivated - 17815 Invalid Mouse Type reported - 17860 BMC Becomes unresponsive to LAN connection - 17863 Capture Reference Frame has too much data in it - 17865 System will not boot w/KVM session Active - 17949 Chan 3 MAC Addr not auto-populated - 18387 Front Panel LCP is not recognized - 18698 Status LED does not turn amber when there is a fault on the system - 19169 Restart Cause command is not working as expected - 19237 PHP sensors stuck in init update mode after exit FW-Xfer mode - 19239 IERR occured at AC power cycle test - 19267 Power control fault beep codes are emitted when repeated power cycles - 19299 LAN Alerts with Alert strings are reported as malformed packets - 19321 EFS format/content not finalized yet - 19324 Mouse/Keyboard Not Initialized when OS booted during a KVM session - 19326 FPGA Encryption Problematic, video data length is invalid BMC 0.29: - 19155 BMC doesn't correctly transition to S1 sleep state - 34955 Implemented Memory board Front and rear temperature sensors - 19139 Console Redirection Causes Firmware Progress Errors in LD - 38307 System failed to log AC power failure during boot - 19107 Failure while verifying sensor initialization value - 18875 Online Firmware Update causes BMC to hang - 19156 RQ_SyncSMBus command locking wrong bus - 18963 PS_PWR_GD ISR is not being enabled occasionally - 18215 Removed init agent changes that were causing other problems - 18936 IERR event always occurs right after AC on - 19135 Added support to update mBMC FW when IMM is installed - 16483 BMC and SDR updates fail - 75901 DC cycling failed with IMM cards installed (Procs go offline) - 75907 Processors being Disabled after an OS Restart - 75908 Problems Powering On after an OS Shutdown - 75915 BMC is shutting down immediately after loading and disabling the CPUs - 74593 BIOS B19~P03 versions cause UUT boot failed after several front panel power cycling while IMM card installed. - 74618 IMM fails in SE7520BD2 -601A SCSI - Better handling of power loss & DC off events - BIOS hangs at POST code 0x2A due to I2C bus collisions with the PCI hot plug chipset ============================================================================= REFERENCE MATERIAL ============================================================================= Intel(R) Server Platform SE7520AF2 Technical Product Specification (TPS) [END OF RELEASE NOTES]Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.