Intel(R) PRO/100 S and SR Mobile Combo Adapters and Intel(R) PRO/100 S and SR Mobile Adapter LAN-only adapters January 7, 2002 Release Notes ======================================================================= Copyright (C) 2002, Intel Corporation. All rights reserved. Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein. * Other product and corporate names may be trademarks of other companies and are used only for explanation and to the owners' benefit, without intent to infringe. ======================================================================= Intel's PRO/100 S and SR Mobile Adapters are designed to work with mobile computers which include a CardBus slot (32-bit PC Card slot). CardBus is the next generation PC Card (PCMCIA) standard. It enables mobile computers to incorporate a PCI-based 32-bit bus, which improves performance. The PRO/100 S and SR Mobile Combo Adapters incorporate Intel's CardBus Ethernet technology and a 56K modem. They incorporate the latest in LAN technology, including advanced power management capabilities. They support ACPI and the CardBus Power Management Specification. The modem supports V.90 and K56flex* technology. This software release of the PRO/100 S and SR Adapter supports Windows* XP, Windows* 2000, Windows* 95 OSR2 (950B or higher), Windows 98, Windows Me and Windows NT* 4.0. A Windows based LAN diagnostic utility and modem utility are also included. Drivers for MS-DOS ODI and NDIS 2 are also provided on the Intel CD. If you have compatibility issues not addressed here, or require additional information, please refer to your Intel CardBus Adapter User's Guide, or check the Intel web site for the latest updates. Remember to register your Intel adapter via the Internet to receive information about software upgrades and new products. CONTENTS ======== - Customer Support - Browser-Viewable User's Guide - Intel PRO/100 S and SR Mobile Adapter Characteristics - Notes on Card Services - Known Limitations - CardBus-Equipped Portable Computers - Modem Information CUSTOMER SUPPORT ================ - Main Intel web support site: http://support.intel.com - Network products information: http://www.intel.com/network - Corporate site: http://www.intel.com - Worldwide access: Intel has technical support centers worldwide. Many of the centers are staffed by technicians who speak the local languages. For a list of all Intel support centers, the telephone numbers, and the times they are open, visit http://www.intel.com/support/9089.htm. - Telephone support: US and Canada: 1-916-377-7000 (7:00 - 17:00 M-F Pacific Time) Browser-Viewable User's Guide ============================= The PRO/100 adapter User's Guide is viewable with Internet Explorer* 4.0+ and Netscape* Navigator 4.0+. You can view the guide by inserting the CD in your computer and waiting for the Autorun menu to appear. Click the View Users Guide button on the Autorun screen. INTEL PRO/100 S AND SR MOBILE ADAPTER CHARACTERISTICS ===================================================== This release of the PRO/100 Mobile Adapters have the following characteristics: - Smart Powerdown-Extends battery life by putting the card into a low power mode when the LAN cable is removed from the adapter. - 10/100 Mbps connectivity - Allows portable PCs equipped with a CardBus slot to connect to 100Base-TX Ethernet networks to take advantage of higher network bandwidth. - The PRO/100 Mobile Adapter takes advantage of the PCI-based 32-bit bus provided by the CardBus slot. This eliminates the bottleneck of a 16-bit bus, thus providing high-performance 100 Mbps networking. - Auto-negotiation of 10 or 100 Mbps Ethernet connection rate - Upon initialization, the adapter will automatically adopt the speed of the network port to which it is attached, allowing it to be used seamlessly on either 10 Mbps (10Base-T) or 100 Mbps (100Base-TX) network segments. - On the LAN+Modem56 adapter, V.90 modem technology allows access to information and e-mail on corporate networks, the Internet, and other online services at speeds up to 56Kbps over standard phone lines. The V.90 mode enables speeds up to 56Kbps when data is downloaded. Upstream data sent from the user travels at the standard V.34 rate. The modems at both ends of the call must be V.90 compatible to achieve 56K speeds, if not, they will negotiate a standard V.34 connection. Making Floppy Disks for Installation ------------------------------------ If you need to use a floppy disk to install the adapter drivers, click the Create Install Disk button on the Intel CD autorun screen. The Create Install Disk utility appears, and you can follow on-screen prompts for creating the installation disk of your choice. (Make sure you have a blank 1.44 MB formatted, non-bootable diskette in the floppy drive when using this utility.) Installing PROSet II and Other Advanced Features ------------------------------------------------ The Intel CD includes an installation utility for installing Advanced Features, which may include the following (your adapter may not support all these features): - Intel(R) PROSet II control panel utility - Desktop Management Interface (DMI) - Intel(R) PRO Network Adapters WMI Provider - Intel(R) PRO Quality of Service WMI Provider - Intel(R) PRO/100 LAN Adapters SNMP - Intel(R) PRO/100 Mobile Modem Utilities For Windows* 95, only Intel(R) PROSet is available. When you insert the Intel CD in the CD-ROM drive, the Autorun screen appears. Select "Install Drivers and Utilities" to start the installer. Alternately, you can start the installer by double clicking AUTORUN.EXE in the root directory of the Intel CD. You can also install drivers without PROSet by selecting "Install Base Driver Only" on the Autorun screen menu. Upgrading to Windows 2000 or XP from prior version of Windows ------------------------------------------------------------- If you are upgrading from a prior version of Windows to Windows 2000 or Windows XP and you have Intel PROSet software installed, access to PROSet may be disabled during the upgrade process. You will need to reinstall Intel PROSet software as using the instructions above or those in the online User's Guide. Updating Software and Drivers in Windows 98 ------------------------------------------- If you're using Windows 98 and have updated or added an adapter, you may experience a problem with device driver update files not being copied. (This is a known problem, for which Microsoft has published a Knowledge Base article, Q242150.) To resolve this problem, perform the following: 1. Reboot the computer. 2. Remove the adapter via Device Manager and reboot the computer again. 3. When prompted for the adapter driver, choose the option "Display a list of all the drivers...". Then choose the adapter from the list and click Have Disk to update the drivers from the Intel CD. 4. Reboot the computer. NOTES ON CARD SERVICES ====================== Windows NT 4.0 -------------- - The PRO/100 Adapter is not compatible with NT 4.0 Card Services requiring support for PCMCIA proposal 187. - SystemSoft CardWizard* versions 4.1 and higher is now compatible with CardBus II adapters - Phoenix CardWare supports the LAN function only. KNOWN LIMITATIONS ================= - In order to connect to a 100Base-TX Ethernet network, a Category 5 unshielded twisted pair (UTP) network cable terminating in a male RJ-45 connector must be connected to a 100Mbps hub or switch. Check with your LAN Administrator if you are not certain of your network speed and infrastructure. - The PRO/100 Mobile Adapter is designed to connect to a 100Base-TX network. It does not support 100VG-AnyLAN networks. - If you are attempting to use the PRO/100 Mobile Adapter in a port replicator or docking station, are using Windows 95 and are having problems, there are three alternatives: 1. Put the adapter in the notebook rather than the replicator or docking station 2. Manually load the drivers 3. Use Windows 98 or Windows Me as these appear to support this environment better than Windows 95. - When attempting to use the PRO/100 Mobile Adapter with a 16-bit adapter (e.g. modems, flash cards, ATA cards) in the other slot, it may be necessary to start up with only the PRO/100 adapter installed, then hot-insert the second adapter. - On the Combo adapter, to achieve 56 Kbps speed, there can be only one digital to analog conversion between the connecting modems. Also, the modems at both ends of the call must be .V90 or K56flex compatible to achieve 56K speeds, if not, they will negotiate a standard V.34 rate. Current FCC regulations limit download speeds of the modem to 53Kbps. - When running MS-DOS, the PRO/100 Mobile Adapters must be initialized by running the CBCOMBO.EXE utility, which can be found in the CARDBUS/DOS folder on the Intel CD. Usage is as follows: CBCOMBO [Optional parameters] For the NDIS 2 DOS driver E100B.DOS the CBCOMBO utility must be run from the CONFIG.SYS file during system startup. The usage for this method is as follows: DEVICE=\path\CBCOMBO.EXE [optional parameters] Simultaneous dual mode operation of the LAN and Modem functions has limited support in the DOS environment. The CardBus II adapter requires that both the LAN and modem function share the same hardware interrupt. Most DOS- based LAN and modem communications applications were developed before the PCI bus made interrupt sharing possible and therefore have no support for interrupt sharing. Using the 16-bit ODI driver, specify either NOCOM or NOLAN when loading the CBCOMBO utility. The 32-bit ODI driver does not support modems. CARDBUS-EQUIPPED PORTABLE COMPUTERS =================================== The PRO/100 S Mobile Adapter requires a portable computer with a CardBus PC Card Slot. Most laptops introduced after January 1997 incorporate CardBus PC Card slots. If you're not sure if your system supports CardBus, contact the manufacturer of your laptop. MODEM INFORMATION ================= For general information on AT commands see the PRO/100 Mobile Adapters User's Guide. For information on configuring the modem for use with the V.90 protocol, see the next topic. S109 REGISTER ------------- The firmware contained in this product is designed to initially attempt to make a v.90 connection, and then fall back to K56flex if the host being dialed does not support v.90. However, the host being dialed must support v.90 auto-detect in order for a v.90 connection to be initiated by default. Please note that if this command is used and a v.90 connection is not achieved the modem will fall back directly to v.34. When S109=2, fall back from v.90 to K56Flex is disabled. To set this value back to the default issue an ATS109=1 command. In summary, the values of this register and the resultant behavior are: S109=1 (default) - Negotiates initially at v.90 if host supports v.90 auto-detect. If host does not support v.90 auto-detect or does not support v.90 at all, will negotiate back to K56flex. S109=2 - Forces v.90 for PCM connects. If host does not support v.90, falls directly back to v.34. Changing the value of the S109 register can be implemented via the following means: - When using a terminal emulator program, enter ATS109=n (where n is the value desired). - To implement with Windows 95/98/W2k/Me/NT dial up networking, go to Control Panel\Modems. Highlight the modem and click Properties. Click Connection\Advanced. Enter S109=n (where n is the value desired) in the Extra Settings box.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.