MANUAL Setting.
The user can append parameters with the following format
[/drive dma=dmamode|pio=piomode]
to the "device=..." statement in the CONFIG.SYS file.
Where
drive specifies which drive to override on. It can be:
PM primary/master
PS primary/slave
SM secondary/master
SS secondary/slave
dmamode specifies the overriding DMA mode. It can be:
SW2 single word DMA mode 2
MW1 multi-word DMA mode 1
MW2 multi-word DMA mode 2
NO not use DMA operation. The driver will use PIO on the
corresponding CD-ROM drive.
piomode specifies the overriding PIO mode. It can be:
0 PIO mode 0
1 PIO mode 1
2 PIO mode 2
3 PIO mode 3
4 PIO mode 4
If the pio_mode is specified, the driver will only use PIO
operation on the corresponding drive.
For example:
device=c:\bmide\tricd.sys /SM dma=no
indicates that we will not use DMA and only use PIO operation on the
master drive of the secondary IDE channel.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.