; Vector.inf
;
; Vector SmartMedia/CompactFlash reader/writer .INF file
;
; (c) Copyright 2000 SmartDisk Corporation
;
[Version]
Signature="$Chicago$"
Provider=%SMDK%
Class=MTD
ClassGUID={4d36e970-e325-11ce-bfc1-08002be10318}
;CatalogFile=Vector9x.cat
;CatalogFile.ntx86=Vector.cat
DriverVer=03/01/2001,1.0.19.0
[PreCopySection]
HKR,,NoSetupUI,,1
;
; Source file information
;
[SourceDisksNames]
1 = %DiskId1%,Vector.inf,,
[SourceDisksFiles]
TibUsb.sys = 1,,
TibClass.sys = 1,,
TibPort.pdr = 1,,
Tibsm.ico = 1,,
Tibcf.ico = 1,,
MarsCf.ico = 1,,
MarsSm.ico = 1,,
[DestinationDirs]
DefaultDestDir = 12
TibUsb.Files.Ext = 10,System32\Drivers
TibPort.Files.Ext = 12
TibClass.Files.Ext = 12
TibClass.Files.Ico = 10
;
; Driver information
;
[Manufacturer]
%SMDK% = SmartDisk
[SmartDisk]
%USB\VID_0917&PID_0001.DeviceDesc%=TibUsb,USB\VID_0917&PID_0001
%USB\VID_0917&PID_0002.DeviceDesc%=TibUsb,USB\VID_0917&PID_0002
%USB\VID_0917&PID_0003.DeviceDesc%=TibUsb,USB\VID_0917&PID_0003
%USB\VID_0917&PID_DA01.DeviceDesc%=TibUsb,USB\VID_0917&PID_DA01
%USB\VID_0917&PID_FFFF.DeviceDesc%=TibClass,USB\VID_0917&PID_FFFF
;
; The following device IDs are for the ScanLogic chip and our
; device before the firmware has been downloaded to the flash.
; This is only used by our manufacturing facility.
;
;%USB\VID_0917&PID_0000.DeviceDesc%=TibUsb,USB\VID_0917&PID_0000,USB\VID_04CE&PID_07D1
[ControlFlags]
ExcludeFromSelect=*
;
; General installation section
;
[TibUsb]
DriverVer=03/01/2001,4.1.0.19
CopyFiles=TibUsb.Files.Ext
AddReg=TibUsb.AddReg
[TibUsb.ntx86]
DriverVer=03/01/2001,1.0.19.0
CopyFiles=TibUsb.Files.Ext
AddReg=TibUsb.AddReg.ntx86
[TibUsb.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,tibusb.sys
HKR,Parameters,SuppressChildPdo,%REG_DWORD%,%SuppressChildUsb%
[TibUsb.AddReg.ntx86]
HKLM,%REG_KEY_USB%,BreakOnEntry,%REG_DWORD%,%BreakFlagUsb%
HKLM,%REG_KEY_USB%,TraceBreakLevel,%REG_DWORD%,%BreakLevelUsb%
HKLM,%REG_KEY_USB%,TraceOutputLevel,%REG_DWORD%,%OutputLevelUsb%
HKLM,%REG_KEY_USB%,SuppressChildPdo,%REG_DWORD%,%SuppressChildUsb%
[TibClass]
DriverVer=03/01/2001,4.1.0.19
CopyFiles=TibPort.Files.Ext,TibClass.Files.Ico
AddReg=TibPort.AddReg
[TibClass.ntx86]
DriverVer=03/01/2001,1.0.19.0
CopyFiles=TibClass.Files.Ext,TibClass.Files.Ico
AddReg=TibClass.AddReg.ntx86
[TibPort.AddReg]
HKR,,DevLoader,,*ios
HKR,,PortDriver,,TibPort.pdr
[TibClass.AddReg.ntx86]
HKLM,%REG_KEY_CLASS%,BreakOnAdd,%REG_DWORD%,%BreakAdd%
HKLM,%REG_KEY_CLASS%,BreakOnStart,%REG_DWORD%,%BreakStart%
HKLM,%REG_KEY_CLASS%,BreakOnEntry,%REG_DWORD%,%BreakFlag%
HKLM,%REG_KEY_CLASS%,BreakOnRead,%REG_DWORD%,%BreakRead%
HKLM,%REG_KEY_CLASS%,BreakOnWrite,%REG_DWORD%,%BreakWrite%
HKLM,%REG_KEY_CLASS%,BreakOnIoctl,%REG_DWORD%,%BreakIoctl%
HKLM,%REG_KEY_CLASS%,TraceBreakLevel,%REG_DWORD%,%BreakLevel%
HKLM,%REG_KEY_CLASS%,TraceOutputLevel,%REG_DWORD%,%OutputLevel%
;
; File sections
;
[TibUsb.Files.Ext]
TibUsb.sys
[TibClass.Files.Ext]
TibClass.sys
[TibPort.Files.Ext]
TibPort.pdr
[TibClass.Files.Ico]
TibCf.ico
TibSm.ico
MarsCf.ico
MarsSm.ico
;
; Service Installation
;
[TibUsb.ntx86.Services]
AddService = TibUsb, %SPSVCINST_ASSOCSERVICE%, TibUsb_Service_Inst, TibUsb_EventLog_Inst
[TibUsb_Service_Inst]
DisplayName = %TibUsb.SvcDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_DEMAND_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\TibUsb.sys
[TibUsb_EventLog_Inst]
AddReg = TibUsb_EventLog_AddReg
[TibUsb_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\TibUsb.sys"
HKR,,TypesSupported,%REG_DWORD%,7
[TibClass.ntx86.Services]
AddService = TibClass, %SPSVCINST_ASSOCSERVICE%, TibClass_Service_Inst, TibClass_EventLog_Inst
[TibClass_Service_Inst]
DisplayName = %TibClass.SvcDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_DEMAND_START%
ErrorControl = %SERVICE_ERROR_IGNORE%
ServiceBinary = %12%\TibClass.sys
[TibClass_EventLog_Inst]
AddReg = TibClass_EventLog_AddReg
[TibClass_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\TibClass.sys"
HKR,,TypesSupported,%REG_DWORD%,7
[Strings]
;
; Non-Localizable Strings
;
SERVICE_KERNEL_DRIVER = 1
SERVICE_DEMAND_START = 3
SERVICE_ERROR_IGNORE = 0
SERVICE_ERROR_NORMAL = 1
REG_SZ = 0x00000000
REG_MULTI_SZ = 0x00010000
REG_EXPAND_SZ = 0x00020000
REG_BINARY = 0x00000001
REG_DWORD = 0x00010001
BreakAdd = "0x00000000"
BreakStart = "0x00000000"
BreakFlag = "0x00000000"
BreakRead = "0x00000000"
BreakWrite = "0x00000000"
BreakIoctl = "0x00000000"
OutputLevel = "0x00000001"
BreakLevel = "0x00000002"
BreakFlagUsb = "0x00000000"
OutputLevelUsb = "0x00000001"
BreakLevelUsb = "0x00000002"
;
; This 'SuppressChildUsb' value is to permit our manufacturing facility
; to program the flash memory with our firmware. It should be a '1' in
; the last digit for that usage. All drive letters are suppressed when
; it is a one, so it is useless to use this in the user environment.
;
SuppressChildUsb = "0x00000000"
SPSVCINST_ASSOCSERVICE = 0x00000002
REG_KEY_USB = "SYSTEM\CurrentControlSet\Services\TibUsb\Parameters"
REG_KEY_CLASS = "SYSTEM\CurrentControlSet\Services\TibClass\Parameters"
;
; Localizable Strings
;
DiskId1 = "eFilm Reader-11 SM/CF Driver Disk"
SMDK = "Delkin Devices, Inc."
TibUsb.SvcDesc = "eFilm Reader-11 SM/CF USB Driver"
TibClass.SvcDesc = "eFilm Reader-11 SM/CF Class Driver"
USB\VID_0917&PID_0000.DeviceDesc = "Delkin Devices Unprogrammed Reader-11 (USB)"
USB\VID_0917&PID_0001.DeviceDesc = "eFilm Reader-11 SM/CF (USB)"
USB\VID_0917&PID_0002.DeviceDesc = "eFilm Reader-11 SM (USB)"
USB\VID_0917&PID_0003.DeviceDesc = "eFilm Reader-11 CF (USB)"
USB\VID_0917&PID_DA01.DeviceDesc = "eFilm Reader-11 Test (USB)"
USB\VID_0917&PID_FFFF.DeviceDesc = "eFilm Reader-11 (Class/PDR)"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.