; ; ; SN32LAN.INF - FILE USED FOR MULTILANGUAGE SUPPORT ; ================================================= ; ; ; SYNTAX: ORIGINAL STRING = DESTINATION STRING (IN ANY LANGUAGE) ; ====== ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; !!!!! WARNING !!!!! ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; DO NOT EDIT THE ORIGINAL STRINGS...ie STRINGS ON THE LEFT HAND SIDE ; OF THE = SIGN... ; ; ; [SWISNIFE] MSG_MAX_COMPATIBILITY = This is a removable media device. For maximum compatibility across all operating systems, Floppy Format is prefered. Do you want to continue with Hard Disk Format anyway? MSG_NT_COMPATIBILITY = Since this is an removable device, Windows NT will assign one drive letter for this drive. Do you want to continue anyway ? MSG_CARTRIDGE_FMT = Cartridge Format NT_MSG_DYNAMIC = SwissKnife has created the partitions, please shut down and restart the system for the changes to take effect. MSG_IDE_TOOL_HEAD = Partition and QuickFormat MSG_DRVR_SET_HEAD = Driver Settings MSG_DYNAMIC = SwissKnife will update the drive icons now! MSG_NODEV = No host adapter(s) found. Please ensure the device is powered up and connected properly.Do you want to retry? MSG_NO_DRIVER = Driver is not installed! DISK_READ_ERR = Error reading disk MSG_PART_INFO_HEAD = Partition Information MSG_NO_PARTITION = Disk not partitioned! MSG_NO_FORMAT = Not formatted LOW_LEVEL_FORMAT_MSG = This disk requires low level format. The system will appear to be locked until the low level format is completed. This process may take 10 to 15 minutes to complete. Do you want to continue? MSG_DATA_ERASE = You are about to format this drive. Please ensure that all windows of this drive are closed before starting the format operation. Do you still want to partition and format this drive? FLOPPY_FMT_MSG = Floppy format FLOPPY_FMT = Floppy format MSG_CREATE_PART_HEAD = Create Partition MSG_NO_PORT_ERR = Number of partitions is not valid! MSG_INVALID_SIZE = Partition size is invalid. For compatibility with DOS, please enter a partition size less than or equal to 2000 MB. MSG_SIZE_ERR = Size of partition to create is not valid! MSG_SIZE_EXECED = Partition size is greater than or equal to the total disk space. Do you want to create a partition of full disk space? MSG_SIZE_EXECED_REMAIN = Partition size is greater than or equal to the remaining disk space. Do you want to create a partition of full disk space? MSG_SIZE_LOW_REMAIN = You have selected to create a partition which is less than the remaining disk space. This will leave out some free space in the hard disk. Do you want to continue? MSG_ONASPI_REBOOT = Partitions created using ONASPI32.DLL. Run setup for the changes to take effect? MSG_REBOOT_SYS = Do you want to restart the system for the changes to take effect? MSG_SIZE_ZERO_ERR = Size should not be zero, Please enter valid size MSG_SIZE_LOW = You have selected to create a partition which is less than the total disk space. This will leave out some free space in the hard disk. Do you want to continue? MSG_ASPI32_FN_ERR = Unable to open a function in WNASPI32.DLL MSG_ERROR = SwissKnife Error WARN_COMMAND_OPTION = Please force the CD changer to behave as a single slot drive from Device - Driver Settings menu option and try again. MSG_MOUNT_PASS = Mount successful. Please choose View-Refresh in My Computer to update the drive icon. MSG_DLG_HDR = CD Mount MSG_MOUNT_FAIL = Mount failed: Is CD present in the selected slot? MSG_ASPI32_FREE_ERR = Unable to free WNASPI32.DLL MSG_ASPI32_LIB_ERR = Unable to load WNASPI32.DLL MEM_ERROR = Memory allocation error. Please free some space and run SwissKnife MEM_ERROR_HEAD = Memory Error MSG_SIO = SwissKnife will now attempt to detect if your system has a high performance parallel port. If this test does not respond for a long time, please restart the system, run SwissKnife from the folder where the software is installed and choose the menu option "Device - Attach" to make use of the external device. Do you want to scan for high performance parallel ports? LOW_LEVEL_FAIL_MSG = Low level format failed! LOW_LEVEL_COMPLETE_MSG = Low level format completed! MSG_MEM_ALLOC_ERR = Memory allocation error MSG_HP_DRIVERS_WARN = If you are going to use a HP Laser Jet 5X/6X series printer in daisy chain with the parallel port device in future, after installing the printer software, please run SwissKnife application from the folder where the software is installed and set "Do not use Printer port Interrupt" from Device -Driver Settings menu option. MSG_SETUP = Setup REFRESH_ERR_MSG = Refresh set timer error REFRESH_ERR_HEAD = Error MSG_NO_MEMORY = There is not enough memory to proceed! MSG_CAPACITY_ERR = Could not read disk capacity! OS_ERROR_MSG = Error in detecting operating system, please contact your vendor. MSG_NO_PORT_DRVR = Unable to locate NT Port Driver MSG_NO_DEVICE = Unable to open connected device MSG_DETACH = You are about to remove this device. Please ensure that you have saved all open files on this device. Do you still want to remove this device? WARNING = Warning NO_ADAPTERS_INSTALLED = No parallel port host adapters found! Please run Setup from the installation diskette. MSG_NT_REBOOT_CMD_LINE = SwissKnife has changed the driver settings. Please shut down and restart the system for the changes to take effect. MSG_ONASPI32_CMD_LINE = SwissKnife has changed the settings. MSG_CAPTION_SCAN = Scan for Device(s) MSG_CAPTION_LIST = Device(s) List MSG_PROMPT = Do you want to test the unit to make sure the connections are correct? MSG_SCAN = Scanning for Host Adapters... MSG_WRITE_SPEED = Computing write speed... MSG_READ_SPEED = Computing read speed... MSG_SN_COPYRIGHT = Copyright 1996-97 \251 OnSpec Electronic, Inc. MSG_MEDIA_ERROR = Media not present MSG_CAPTION_FLPY_FMT = Floppy Format MSG_CAPTION_HD_FMT = Hard Disk Format MSG_FLPY_FMT = Floppy Format is in progress, please wait... MSG_HD_FMT = Hard Disk Format is in progress, please wait... LOW_LEVEL_FMT_MSG = Low level format is in progress, please wait... LOW_LEVEL_FMT = Low Level Format MSG_ATTACH_TEXT = Please choose the device you want to attach and click on OK. MSG_DETACH_TEXT = Please choose the device you want to detach and click on OK. MSG_HP_DRIVERS_FOUND = Setup has detected an HP Laser Jet 5x/6x series printer in your system. Setup will modify the installation to co-exist with this printer. MSGS_PORT_DETECT = Port detected: MSGS_SUPER_IO = Super IO: MSGS_THRUPUT = Throughput supported by the port: MSGS_READ = Read: MSGS_WRITE = Write: MSGS_PCMCIA_DETECT = PCMCIA: MSGS_PCMCIA_ADDRESS = Detected at base address 160-16F IRQ: 9 MSGS_ABOUT = About MSG_TOTAL_NO_PART = Total number of partition(s): MSG_REMOVABLE = Removable MSG_FIXED = Fixed MSG_SCANNING = Scanning the slots, please wait... MSG_ATTACH_HEAD = Attach MSG_DETACH_HEAD = Detach MSG_MOUNTING = Mounting the slot, please wait... MSG_FAT32_PART = Size of the disk is greater than 2GB. You can create a single primary partition of full disk size by using FAT32 type. If you choose this option, this disk can be used only on Windows 95B and above. Do you want to create a single primary partition? MSG_CREATE_FAT32_PART_HEAD = FAT32 Partition MSG_CREATE_FAT32 = Creating FAT32 primary partition, please wait... ;STATIC CONTROLS... ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; Strings For The "ATTACH\DETACH" Dialog Box ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; MSG_GROUP_BOX = &Devices MSG_ATA_DET_ATAPI = &ATAPI/IDE Parallel Port Host Adapter MSG_ATA_DET_SCSI = &SCSI Parallel Port Host Adapter MSG_OK_BUTTON = &OK MSG_CANCEL_BUTTON = &Cancel MSG_CLOSE_BUTTON = &Close MSG_PARTITION_INFO_HELP = &Help ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; Strings For The "Create Partition" Dialog Box ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; MSG_PARTITION_TYPE = First partition type MSG_PRIMARY_LOGICAL = &Primary MSG_LOGICAL = &Extended MSG_PARTITION_MODE = Partitioning mode MSG_AUTO_MODE = &Auto mode MSG_CUSTOM_MODE = C&ustom mode MSG_NUMBER_PART = &Number of partition(s) (1 to 4): MSG_SIZE_OF = &Size of MSG_STATUS = Status: MSG_START_BUTTON = S&tart MSG_CANCEL_BUTTON_DCREATE = &Cancel MSG_HELP_BUTTON_DCREATE = &Help MSG_NOTE = If you wish to make this disk to be "bootable" you should choose Primary as your First partition type. MSG_NOTE_GROUP = Note ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; Strings For The "Devices List" Dialog Box ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; MSG_COL_HEAD_DEVICE = Device MSG_COL_HEAD_TYPE = Type MSG_COL_HEAD_HA = Host Adapter MSG_COL_HEAD_POSITION = Position ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ;Strings For The "Partition And Quick Format" Dialog Box ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; MSG_DEVICE_FOUND = &Device(s) found: MSG_DISK_INFORMATION = Disk information: MSG_TOTAL_DISK_SPACE = Total disk space: MSG_NUMBER_CYL = No. of cylinders: MSG_NUMBER_SECTOR = No. of sectors / track: MSG_NUMBER_HEAD = No. of heads: MSG_MEDIA = Media: MSG_PART_INFO_BUTTON = &Partition Info MSG_CREATE_PART_BUTTON = C&reate Partition ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; Strings For The "Driver Settings" Dialog Box ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; MSG_DRIVERS_FOUND = Dri&ver(s) found: MSG_PORT_ACCESS_PARAM = Port access parameters MSG_SLOW_EPP_ACCESS = &Slow down Enhanced Parallel Port access MSG_SPIN_DOWN = Spin down time in &minutes (1-16): MSG_TURN_OFF_BURST = &Turn off Burst mode MSG_FORCE_SPP = &Force port to behave as a Standard Parallel Port MSG_NO_SIO = Do not auto detect Su&per IO MSG_REDUCE_SPEED = R&educe port access speed by (1-30): MSG_IDE_USAGE = IDE usage MSG_ATAPI_USAGE = ATAPI CD changer usage MSG_CHK_CHANGER = Force CD changer to &behave as a single slot drive MSG_INTERRUPT_USAGE = Interrupt usage MSG_DO_NOT_USE_IRQ = Do ¬ use Printer port Interrupt MSG_AUTO_DETECT_IRQ = Auto &detect IRQ MSG_FORCE_IRQ = F&orce IRQ (1-14): MSG_RESTORE_BUTTON = &Restore MSG_APPLY_BUTTON = &Apply MSG_MAX_XFER = Set maximum transfer length MSG_MAX_XFER_AUTO = A&uto MSG_MAX_XFER_4K = &4 K MSG_MAX_XFER_8K = &8 K MSG_MAX_XFER_16K = &16 K MSG_MAX_XFER_32K = &32 K MSG_MAX_XFER_64K = &64 K ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; Strings For The "HP DRIVERS FOUND" Dialog Box ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; MSG_YES_BUTTON = &Yes MSG_NO_BUTTON = &No MSG_OK_BUTTON = &Ok ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; Strings For The "Partition Information" Dialog Box ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; MSG_PARTITION_LIST = &Partition(s) list: MSG_PARTITION_DETAILS = Partition details: MSG_TYPE = Type: MSG_ACTIVE_FLAG = Active flag: MSG_FILE_SYSTEM = File system: MSG_SIZE = Size: MSG_VOLUME_LABEL = Volume label: MSG_TOT_DISK_SPACE = Total disk space: MSG_SET_ACTIVE = &Set Active MSG_MADE_ACTIVE = The selected partition made active ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; Strings For The "Win Mount" Dialog Box ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; MSG_SLOT_INFO = &Slot Information: MSG_MOUNT_BUTTON = &Mount MSG_REFRESH_BUTTON = &Refresh ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; Strings For The "Cartridge Format" Dialog Box ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; MSG_SELECT_RMV_DRIVE = You have selected a removable drive. Please choose the type of partition you want to create: MSG_PART_TYPE = Partition type MSG_FLOPPY_FORMAT = &Floppy format of full disk space MSG_HARD_DISK_FORMAT = H&ard disk format ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; Strings For The SubMenu Items ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; MSG_MENU_SCAN_DEVICES = &Scan for Device(s) MSG_MENU_TOOLS = &Partition and QuickFormat MSG_MENU_CD_MOUNT = &CD Mount MSG_MENU_ATTACH = &Attach MSG_MENU_DETACH = D&etach MSG_MENU_DRVR_SET = Driver &Settings MSG_MENU_HELP_TOPICS = Help &Topics MSG_MENU_ABOUT = &About MSG_MENU_EXIT = E&xit ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; Strings For The "Create FAT32 Partition" Dialog Box ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; FAT32_PART_SIZE_MSG = Size: FAT32_PART_STATUS_MSG = Status: FAT32_PART_TYPE_MSG = Type: FAT32_PARTITION = Primary MB_MSG = MB DISK_WRITE_ERR = Error writing disk. Partition cancelled. MSG_AT_ADDRESS = at address MSG_KB_PER_SEC = kb/sec MSG_ATAPI_CDROM = ATAPI - CD-ROM MSG_ATA_PDCD_DISK = Hard Disk MSG_IDE_DISK = IDE - Hard Disk MSG_LS120_DISK = LS-120 MSG_PCMCIA = PCMCIA MSG_MASTER = Master MSG_SLAVE = Slave MSG_SCAN_HOST_ADPT = Scanning Host Adapter: MSG_TARGET = Target: MSG_FLOPPY_PART = Partition Size: EXTERNAL_DRIVE_MSG = External drive EXTENDED_PART_MSG = Extended PRIMARY_PART_MSG = Primary LOGICAL_PART_MSG = Extended ONTRACK_PART_MSG = Ontrack UNKNOWN_MSG = Unknown PCMCIA_DRIVE_MSG = PCMCIA drive HD_FMT_FMT_MSG = Hard disk format NOT_APPLICABLE_MSG = Not applicable BOOTABLE_MSG = Bootable NON_BOOTABLE_MSG = Non bootable MSG_FIRST_PART = first partition MSG_PARTITION = partition MSG_FIRST = first MSG_SECOND = second MSG_THIRD = third MSG_FOURTH = fourth MSG_DATAPROT = Medium is write protected! MSG_UNKNOWNERR = An unknown error has occured! MSG_NOTREADY = Drive not ready! MSG_MEDIUMERR = Medium error! MSG_HARDERROR = Hardware error! MSG_MIRROR_DRVR_INSTALLED = "Mirror driver has been installed, unable to create partition " MSG_DEV_LIST = "Device(s) found:" ; ;Strings Taken From ATAPI DRIVER... ; MSG_CHK_MASTER = Scanning for a device, please wait... MSG_CHK_SLAVE = Scanning for a device, please wait...... ONSPEC-ATA_PC_CARD = ONSPEC-ATA_PC_CARD PCMCIA_MSG_DYNAMIC = SwissKnife has created the partitions, please stop the PC-CARD once, remove it and insert again for the changes to take effect. ; ;Strings For Primary Partition ; MSG_CREATE_PRIMARY = Do you wish to have a primary partition? MSG_PRI_ACTIVE = Do you wish to make the primary partition active? MSG_QUICK_FMT = QuickFormatting, please wait... ; ;Strings Displayed by DYNAICON ; [DynaIcon] MSG_WAIT = "Dyna Icon is adding the device to your system, please wait..." MSG_WAIT_FOR_REV = "Dyna Icon is removing the device from your system, please wait..." MSG_SCAN_WAIT = "DynaScan is adding the device to your system, please wait..." MSG_SCAN_WAIT_FOR_REM = "DynaScan is removing the device from your system, please wait..." MSG_DETACH_WARN = "The parallel port device is about to be removed. Please ensure that all the applications using this device are closed. Do you want to continue?" MSG_SN32 = "SwissKnife application is running. Please use Device-Attach/Detach menu option of SwissKnife to add/remove the device." MSG_CAPTION = "Dyna Icon"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.