lmos2.txt Driver File Contents (6102v20.exe)

*                                                                           *
*               VIA PCI 10/100Mb Fast Ethernet Adapter                      *
*                                                                           *
*              NDIS2 Driver for MS LAN MANAGER OS2 Server                   *
*                                                                           *
*                                                                           *


  The Ethernet NDIS2 Driver for LAN MANAGER OS2 Server confirms to the
  Network Driver Interface Specification(NDIS2). This document shows you how
  to setup the driver and how to use the enhanced functions by setting the
  custom keywords in configuration file.

Contents of the Subdirectory:

    LMOS2.TXT           This file.
    FETND.OS2           The NDIS2 driver for LAN MANAGER OS2 Server.
    PROTOCOL.INI        Sample protocol.ini file.
    ..\..\NIF\FETND.NIF The installation information file.


  Before starting with the installation process, make sure that the adapter
  is properly installed and configured. You can use the diagnostic program
  (A:\SETUP.EXE) to make sure your connection with the network is correct.

  Installing driver procedure on LAN MANAGER OS2 Server:

     1) If you install LAN Manager for the first time, you Install LAN Manager
        to your HardDisk by running SETUP.EXE program from the setup diskette.
        Upon completion of the workstation's last disk installation, you
        will be asked if you want to import additional network drivers.
        Answer "YES".

        If you have already installed LAN Manager in your hard disk, run
        SETUP.EXE from HardDisk and select "Actions"->"Import Network Driver"

     2) Insert the NDIS2 driver diskette into drive 'A' and follow the steps
        on the screen. Select the "PCI ETHERNET ADAPTER" card and press
        "enter", then SETUP.EXE program will copy the necessary NDIS2 driver
        programs from the driver diskette to your hard disk, according to LAN
        MANAGER file structure.

     3) Reboot your computer for the changes to take effect.

4Configuration Files:

    Sample of configuration file:
    (Suppose the Lan Requester package is installed at C:\NET directory)

    File Name:          C:\CONFIG.SYS

    File Name:          C:\STARTUP.CMD
        @if errorlevel 2 C:\IBMLAN\NETPROG\lserr.exe

    File Name:          C:\IBMCOM\PROTOCOL.INI
           FETND_nif = FETND.nif
           Bindings = FETND_nif
           Bindings = FETND_nif
           Bindings = FETND_nif
           DriverName    = FETND$
           Iobase        = 0x0300
           Interrupt     = 5

    Custom Keywords:
        FULLDUPLEX                      This keyword is used to enable full
                                        duplex mode.

        SPEED                           This keyword is used to force the
                                        adapter at 10M/100M speed.

        AUTO                            This keyword is used to force the
                                        chip at Auto-Negotiation mode.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.69