* README * * Ralink Tech Inc. * * http://www.ralinktech.com * RT2500 b/g driver for RT2500 b/g, Ralink Tech Corp. ================================================================= The source code package verified for Linux version after RedHat Linux 7.1. 1) SETUP SEQUENCE ====================================================================== a. $tar -xvzf RT2500STA-Linux-1.1.0.tgz go to "./RT2500STA-Linux-1.1.0/Module" directory. b. Use 'chmod' command to change access right of following script files : 'load', 'unload', 'Configure' c. $make config # config build linux os version d. $make all # compile driver source code e. $load # load/insmod module(rt2500.o) Note: Script functionality: load load module to kernel unload unload module from kernel Configure retrive linux version 2) To BUILD UTILITY ====================================================================== a. go to the "./Utility" directory b. run 'qmake -o Makefile raconfig2500.pro' If qmake command is not found in your system, you can download the QT tool 'qt-x11-free-3.2.1' or later at http://www.trolltech.com/ (qmake comes with RedHat 7.3 or later QT Package) c. run 'make" to compile the utility source code. d. After all, an execution file would be generated "RaConfig2500" run "RaConfig2500" to config the driver as you want 3) CONFIGURATION ====================================================================== RT2500 driver can be configured via following interfaces, i.e. i)"iwconfig" command, ii)"iwpriv" command, iii) configuration file, iv) RaConfig2500 i) iwconfig comes with kernel. Please refer file "iwconfig_usage.txt" for details. ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details. iii)copy configuration file "RT2500STA.dat" to /etc/Wireless/RT2500STA/RT2500STA.dat. Please refer to 3.1) for details. iv) RT2500 provides API : RaConfig2500, please go to directory ./utility and refer to how-to-compile.txt 3.1) Configuration File : RT2500STA.dat # Copy this file to /etc/Wireless/RT2500STA/RT2500STA.dat # This file is a binary file and will be read on loading rt2500.o module. # # Use "vi -b RT2500STA.dat" to modify settings according to your need. # # 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using Infrastructure # 2.) set Channel to "0" for auto-select on Infrastructure mode # 3.) set SSID for connecting to your Accss-point. # 4.) AuthMode can be "OPEN", "SHARED", "WPAPSK", "WPANONE" # 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES" # for more information refer to the Readme file. # [Default] CountryRegion=0 WirelessMode=0 SSID=AP350 NetworkType=Infra Channel=0 AuthMode=OPEN EncrypType=NONE DefaultKeyID=1 Key1Type=0 Key1Str=0123456789 Key2Type=0 Key2Str= Key3Type=0 Key3Str= Key4Type=0 Key4Str= WpaPsk=abcdefghijklmnopqrstuvwxyz TXBurst=0 TurboRate=0 BGProtection=0 ShortSlot=0 TxRate=0 RTSThreshold=2312 FragThreshold=2312 PSMode=CAM ----------------------------------------------- syntax is 'Param'='Value' and describes below. 1. CountryRegion=value value 0: for use channel 1-11 1: for use channel 1-11 2: for use channel 1-13 3: for use channel 10-11 4: for use channel 10-13 5: for use channel 14 6: for use channel 1-14 7: for use channel 3-9 2. WirelessMode=value value 0: 802.11 B/G mixed 1: 802.11 B only 3. SSID=value value 1~32 ascii characters. 4. NetworkType=Infra value Infra : infra-structure mode Adhoc : ad-hoc mode 5. Channel=value value 1~14 depends on CountryRegion 6. AuthMode=value value OPEN For Open System SHARED For Shared key system WPAPSK 7. EncrypType=value value NONE :For AuthMode=OPEN or AuthMode=SHARED WEP :For AuthMode=OPEN or AuthMode=SHARED TKIP :For AuthMode=WPAPSK 8. DefaultKeyID=value value 1 ~ 4 9. Key1Type=value value 0: Hexadecimal 1: Ascii 10. Key1Str=value value 10 or 26 hexadecimal characters eg: 012345678 5 or 13 ascii characters eg: passd 11. Key2Type=value value 0: Hexadecimal 1: Ascii 12. Key2Str=value value 10 or 26 hexadecimal characters eg: 012345678 5 or 13 ascii characters eg: passd 13. Key3Type=value value 0: Hexadecimal 1: Ascii 14. Key3Str=value value 10 or 26 hexadecimal characters eg: 012345678 5 or 13 ascii characters eg: passd 15. Key4Type=value value 0: Hexadecimal 1: Ascii 16. Key4Str=value value 10 or 26 hexadecimal characters eg: 012345678 5 or 13 ascii characters eg: passd 17. WpaPsk=value value 8 ~ 63 characters or 64 hexadecimal characters 18. TxBurst=value value 0: Disable 1: Enable 19. TurboRate=value value 0: Disable 1: Enable 20. BGProtection=value value 0: Auto 1: Always On 2: Always Off 21. ShortSlot=value value 0: Disable 1: Enable 22. TxRate=value value 0: Auto 1: 1 Mbps 2: 2 Mbps 3: 5.5 Mbps 4: 11 Mbps 5: 6 Mbps //WirelessMode must be 0 6: 9 Mbps //WirelessMode must be 0 7: 12 Mbps //WirelessMode must be 0 8: 18 Mbps //WirelessMode must be 0 9: 24 Mbps //WirelessMode must be 0 10: 36 Mbps //WirelessMode must be 0 11: 48 Mbps //WirelessMode must be 0 12: 54 Mbps //WirelessMode must be 0 23. RTSThreshold=value value 1 ~ 2312 24. FragThreshold=value value 256 ~ 2312 25. PSMode=value value MAX_PSP Power Saving Mode CAM CAM (Constantly Awake Mode) 4) MORE INFORMATION ================================================================================= If you want for rt2500 driver to auto-load at boot time: A) choose ra0 for first RT2500 WLAN card, ra1 for second RT2500 WLAN card, etc. B) create(edit) 'ifcfg-ra0' file in /etc/sysconfig/network-scripts/, edit( or add the line) in /etc/modules.conf: alias ra0 rt2500 C) edit(create) the file /etc/sysconfig/network-scripts/ifcfg-ra0 DEVICE='ra0' ONBOOT='yes' NOTE: if you use dhcp, add this line too . BOOTPROTO='dhcp' *D) To ease the Default Gateway setting, add the line GATEWAY=x.x.x.x in /etc/sysconfig/networkDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.