NE34ND.SYS Ver 1.10 02/26/96 Description: 1. NE34ND.SYS is a NDIS 3.x driver for Windows NT 3.51 Platforms. If there is only one NE-34 PCI Adapter, the driver will automatically get IOBASE and IRQ from PCI Configuration Space. If there is more than one NE-34 PCI Adapters , user can indicate a specified NE-34 PCI card by inputing IDs. 2. OEMSETUP.INF is a Network Setup Information File for Windows NT 3.51 Platforms. Installation: 1. Load NE34ND.SYS and OEMSETUP.INF files into local hard disk. 2. Double-click the 'Control Panel' icon in the 'Main' Program Group. 3. Double-click the 'Network' icon from the 'Control Panel' Window. 4. Click the 'Add Adapter' button in the 'Network Settings' Dialog Box. 5. When the 'Add Network Adapter' Dialog Box appears, select the '<Other> Requires disk from manufacturer' item in the list of network cards and then press <Enter>. 6. Type the path that contains then NE34ND.SYS and OEMSETUP.INF files and then press <Enter>. 7. Select the 'NE-34 PCI Adapter' item in the 'Select OEM Option' Dialog Box and then click the 'OK' button. 8. If there is only one NE-34 PCI adapter in your system , click the 'Ignore' button when the 'Input Ethernet ID' Dialog Box appears. Otherwise, type Ethernet IDs when the 'Input Ethernet ID' Dialog Box appears and then click the 'OK' button. 9. Bind the adapter to the transport drivers by choosing the 'Binding' button in the 'Network Settings' Dialog Box. 10.When you finish the installation procedure, click the 'OK' button. 11.The SETUP program has already copied the files NE34ND.SYS and OEMSETUP.INF to the c:\winnt35\system32\drivers directory , but OEMSETUP.INF has been renamed as another installation information file. 12.Restart your computer. Use: 1. Boot your computer. 2. If you want to select another NE-34 card,perform the following steps: a. Double-click the 'Control Panel' icon in 'Main' Program Group. b. Double-click the 'Network' icon from 'Control Panel' Window. c. Select the 'NE-34 PCI Adapter' item in 'Installed Adapter Cards' Window and double-click the 'Configure' button. d. When the 'Input Ethernet ID' Dialog Box appears,type the Ethernet IDs you want to select and then click the 'OK' button. e. Click the 'OK' button in the 'Network Settings' Dialog Box. f. Restart your system. Trouble Shooting 1. Message----> At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details. Solution---> Make sure your NE-34 PCI card is plugged into your system or, if there exists more than one NE-34 PCI adapters , you should indicate each NE-34 card by specifying an ID. 2. Condition--> The Windows NT 3.51 cannot boot normally. Solution---> Make sure your NE-34 PCI is connected to the cable. Histories of Release: ***) 1.00, 11-17-1995 First release. ***) 1.10, 02-26-1996Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.