1. ne34pci.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (ne34pci.zip)

                         NE34OD.COM Ver 1.20


                               02/26/96


Description:

  1. NE34OD.COM is a ODI workstation driver. It is for the DOS environment
     only and therefore defaults to the 802.3 frame type.

  2. If there is only one NE-34 PCI adapter, the driver will automatically
     read IOBASE and IRQ from PCI Configuration Space.

  3. If there is more than one NE-34 PCI adapters , user  must indicate  a
     specified IOBASE in NET.CFG file.

  4. If you want to login to Netware server, you need five files:

        LSL.COM
        NE34OD.COM
        IPXODI.COM
        VLM.EXE
        NET.CFG


Installation:

   1. The running sequence is:

        LSL.COM
        NE34OD.COM   --> NE-34 PCI DOS ODI driver
        IPXODI
        NETX

   2. Modify the NET.CFG file to set

      (a) 'Ethernet Frame' type if you wish; the  valid NET.CFG files  are
          shown below:

                Link driver NE34OD
                frame ethernet_802.2
                frame ethernet_802.3
                frame ethernet_ii
                frame ethernet_snap

      (b) 'IOBASE' if there is more than one NE-34 card, the valid NET.CFG
          is as shown below:

                Link driver NE34OD
                port d000

      For more information on NET.CFG parameters, see
      "NetWare Workstation for DOS" or
      "ODI for DOS User's Guide".


Use:

  Available command line options:

  NE34OD   -Installs the LAN driver
  NE34OD U -Unloads resident LAN driver from memory
  NE34OD ? -Displays this help screen


Trouble Shooting

  1. Message---> FATAL: NE-34 NIC Command port failed to respond.
                 FATAL: Board failed to initialize correctly.'

     Solution--> Make sure
                 a. your NE-34 PCI card is plugged into the system, and

                 b. if there is more than one NE-34 card in your system ,
                    you must use the I/O port to select a NE-34 card.This
                    is done by adding  the following  statements  to  the
                    NET.CFG file:

                        Link Driver NE34OD
                            port d000      ---> selected NE-34 card.

  2. Message---> A File Server could not be found.'

     Solution--> Make sure
                 a. your NE-34 PCI card is connected to the cable,

                 b. the Novell OS is active in this network,

                 c. the frame types between client(your system) and server
                    (Novell OS) are the same.


Histories of Release:

    ***) 1.10,  11-06-1995
         First release.

    ***) 1.20,  02-26-1996