===============================================================
How to install LAN Manager MS-DOS workstation with NE34ND.DOS
===============================================================
* Please follow the procedures below to setup LAN Manager DOS workstation:
1. When installation program asks for a network drivers, select
"Other Driver".
2. Insert NE-34 PCI Drivers diskette into drive A:
3. Type "A:\" and press <Enter>
4. Follow the direction to finish the setup procedure.
* Trouble Shooting
1. Message---> !! No NE34PCI card detected
Solution--> Make sure that your NE-34 PCI card is plugged steadily.
2. Message---> !! No free NE34PCI card
Solution--> One driver for one card. Make sure that there is less
drivers loaded than card plugged. If option keyword
SelectedID is assigned, make sure all node ID's assigned
is correct or let drivers without SelectedID be loaded
after those with SelectedID.
3. Message---> !! Cannot open PROTMAN$
Solution--> Make sure PROTMAN.DOS is loaded before NE34ND.DOS,and it
is initialized successfully.If the syntax of PROTOCOL.INI
is incorrect, PROTMAN$ cannot be loaded.
4. Message---> !! Bad Parameter in PROTOCOL.INI
Solution--> The parameter is invalid. For example, the correct
SelectedID format need two single quotation signs (').
If you fail to do it, this message will be shown.
5. Message---> !! Unknown Keyword in PROTOCOL.INI
Solution--> NE34ND only accepts two keywords:
DRIVERNAME and SELECTED. Other keywords are unknown.
Notice ! PCI bus need not assign IOBASE and INTERRUPT.
6. Message---> !! Specified SELECTEDID is absent or bound
Solution--> You specified a NODE ID at keyword SelectedID , and this
ID is bound by another drivers or can not be found. Make
sure that the ID is correct.
* Version Release
1.04 11-15-1995 This is the first revision of NE34ND.DOS 2.0.1 MAC Driver.
2.00 02-05-1996 Reconstruct the source to support OS/2.
2.01 02-26-1996 .
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.