PROTOCOL.INI Driver File Contents (cnet200.zip)

        DriverName = DM9PCI$
;---------------------------------------------------------------------------------
; PROTOCOL.INI of CNET PRO200WL PCI Series Ethernet Adapter
;---------------------------------------------------------------------------------
; Description :
;       Drivername = DM9PCI$
;
;       SLOT =  1
;          This parameter specifies the slot number used for notifications.
;          For PCI slot , you can specify from 1 to 16.
;
;       MEDIA_TYPE = AUTODETECT
;       MEDIA_TYPE = FM_100M_FULL
;       MEDIA_TYPE = FM_100M_HALF
;       MEDIA_TYPE = FM_10M_FULL
;       MEDIA_TYPE = FM_10M_HALF
;       Note:
;          AUTODETECT    ; --> Auto detect the data rate and duplex mode
;          FM_100M_FULL  ; --> Forced 100M Full Duplex Mode
;          FM_100M_HALF  ; --> Forced 100M Half Duplex Mode
;          FM_10M_FULL   ; --> Forced 10M Full Duplex Mode
;          FM_10M_HALF   ; --> Forced 10M Half Duplex Mode
;
;          This parameter specifies the connector type configuration
;          (data rate and duplex mode) of the  network adapter card.
;------------------------------------------------------------------------------

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.14