1. AO-DR_SMC1244TXv2_DRV.zip Driver
2. NDIS.TXT File Contents

NDIS.TXT Driver File Contents (AO-DR_SMC1244TXv2_DRV.zip)

*****************************************************************************
*                           SMC Networks, Inc.                              *
*                    SMC EZ Card 10/100 (SMC1244TX V2)                      *
*                        NDIS/2 Driver Installation                         *
*                                                                           *
*                   Copyright (C) 2002 SMC Networks, Inc.                   *
*                            All Rights Reserved.                           *
*****************************************************************************

The drivers you need are in the directories MSLANMAN.DOS, MSLANMAN.OS2 and
NDIS2. The NDIS drivers contained in these subdirectories are used with 3Com
3+Open, Microsoft OS/2 LAN Manager OEM distribution, Release 1.x or 2.x,
and other compatible OEM versions of LAN Manager.  The driver can also used
with IBM LAN Server 3.0, 4.0, Banyan VINES, ARTISOFT LANtastic 5.0, 6.0,
Wollongong Pathway Access, Microsoft Windows for Workgroups v3.11,
DEC PATHWORKS, Sun PC-NFS etc.


The drivers named FastNIC conform to the Network Driver Interface Specification
(NDIS) defined by Microsoft/3Com.

Included in MSLANMAN.DOS, and NDIS subdirectories are the following files:

\MSLANMAN.DOS\DRIVERS\FastNIC\FastNIC

    FastNIC.DOS          The DOS NDIS MAC driver
    PROTOCOL.INI         A sample section of PROTOCOL.INI file

\MSLANMAN.DOS\DRIVERS\NIF\

    FastNIC.NIF          Network Information File

\MSLANMAN.OS2\DRIVERS\FastNIC\FastNIC

    FastNIC.OS2          The OS2 NDIS MAC driver
    PROTOCOL.INI         A sample section of PROTOCOL.INI file

\MSLANMAN.OS2\DRIVERS\NIF\

    FastNIC.NIF          Network Information File


\NDIS

    NDIS.TXT            This readme file

    WFW.TXT             The Installation guide for
                        Windows for Workgroups v3.11

    LANMAN.TXT          The Installation guide for
                        LAN Manager

    LANSVR.TXT          The Installation guide for Lan Server

    BANYAN.TXT          The Installation guide for Banyan VINES

    LANTASTI.TXT        The Installation guide for ARTISOFT LANtastic 5.0, 6.0

    PATHWORK.TXT        The Installation guide for DEC PATHWORKS

    PCNFS.TXT           The Installation guide for Sun PC-NFS


\NDIS2\DOS

    FastNIC.NIF         Network Information File for IBM Lan Support Program
    FastNIC.DOS         The DOS NDIS/2 driver
    OEMSETUP.INF        Network Information File for Windows for Workgroups
                        v3.11
    PROTOCOL.INI        A sample section of PROTOCOL.INI file


\NDIS2\OS2

    FastNIC.NIF         Network Information File for IBM LAN Server 3.0, 4.0
    FastNIC.OS2         The OS2 NDIS/2 driver
    PROTOCOL.INI        A sample section of PROTOCOL.INI file


Sample PROTOCOL.INI Files and Parameters
----------------------------------------
[FASTNIC_NIF]

  DriverName = FSTNIC$
; Slot = 1            ;; {1-4}
; MEDIA = AUTODETECT
; {MEDIA = UTP, UTP_FD,UTP_100,UTP_100FD, AUTODETECT}

There are several parameters included in the FASTNIC_NIF section of the
PROTOCOL.INI file. However, the only parameter that you should specify
is the "drivername."

If you change other parameter settings, such as the MEDIA, make sure
that it matches the hardware setting.  Otherwise, the adapter may fail.

If you don't specify these settings, SMC1244TX V2 NDIS/2 driver will
automatically detect them.


SLOT        Specifies which network adapter is used by the driver.  If you
            have only one SMC EZ Card 10/100 (SMC1244TX V2)'s LAN card in your
            machine, this parameter is unnecessary!  For two or more Fast
            Ethernet's PCI LAN cards, this parameter is required and cannot
            be omitted from PROTOCOL.INI. For the first FastNIC adapter, Slot=1, and
            the second one, Slot=2, third, Slot=3,..., etc.

MEDIA       Specifies the medium type used by the adapter.
            Acceptable values for this parameter are AUTODETECT, UTP, UTP_FD
            ,UTP_100 and UTP_100FD. If you didn't specify this settings it
            would be AUTODETECT for FastNIC.

            UTP   : 10BaseT, UTP_100: Fast Ethernet (100BaseTx)
            UTP_FD: 10BaseT with Full_Duplex
            UTP_100FD: 100BaseTx with Full_Duplex

            Default: AUTODETECT