To updated your CD-R firmware to version 2.00
To update the CD-R firmware:
1. Startup your computer system in DOS environment
(i.e. Win95 user, please press F8, select Command Prompt only when
"starting Windows 95" messsage appear)
2. Insert the " EZ-SCSI installation disk" to the floppy drive
3. Type "A:\Install" to begin installing the SCSI driver for the CD-R
4. Follow the screen instructions to complete the installation
5. Restart the computer in DOS for the new driver to take effect.
6. Ensure that the CD-R drive is detected and working properly in DOS.
7. From DOS prompt, Type : Downfirm mk200.bin
8. The drive LED light will begin to blink, wait until it stops
(about 1 min)
9. Restart the computer and the drive firmware is updated
For Windows 95 users, After you have updated the firmware, you must
remove the EZ-SCSI drivers from the system Configuration files.
2. Install the GEAR software.
3. If you should have problem using our CD-R kit, please fill in the Field
Report form as details as possible to ensure you get the best help.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.