1. r32jd7d2.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (r32jd7d2.exe)

[Driver Model]: FM + 3D SRS sound.

[Subject]: Magic MP32  3D Plug and Play Audio+Modem card 
           setup driver version R3.2j-D7 for windows 95.
           (Audio Driver is based on Crystal ver 1.80 driver .) 
           (Modem Driver is based on Rockwell Semiconductor driver.)
             
[Install]: 
       Install the card driver for Win'95 .
       (a) Removing all sound card driver first if you have installed any 
           sound card drivers before :
           If you have installed the the driver or any other 
           sound card driver , please uninstall these sound card
           driver before install the new  card's driver.
           Please follow the [Unistall] section for detailed instruction .
           ** And before you proceed with the card installation, you must 
  	   disable the COM port that you want to use for the modem in the 
	   BIOS setup.  For detailed information on BIOS, refer to the 
	   user's guide that comes with your system board.	

       (b) Insert card , then power on the machine :
           After inserting the card to your machine , then power 
           on your machine . 

       (c) Insert the driver setup disk :
           Because the card's Plug and Play property , windows 95
           will auto detect the card . During installation ,you 
           will see some pictures below :
           (1) Windows 95 will auto create the information for card .
           (2) You will see a picture for three choices . And the default 
               is setting to " Driver from disk provided by hardware 
               manufacture " .
          *(3) Click "OK" . Then you'll see another picture asking you to 
               insert the card setup disk. 
          *(4) Please insert the setup disk or browsing the path
               where the file "install.inf" is .  ( e.g. A:\ )
          *(5) Click "OK" .
           (6) Then win95 will copy files from the source disk .
               And the system will auto detect 5 audio device:

               "Magic MP32 PnP Audio System CODEC"
               "Magic MP32 CD-ROM ( No Install )"
               "Magic MP32 PnP Audio System Joystick"
               "Magic MP32 PnP Audio System Control Registers"
               "Magic MP32 PnP Audio System MPU-401 Compatible"
         
              ,and it'll auto load and create the related driver and 
              information .
        
       (d) After completing the Audio driver setup program , 
           you will see Win95 setup driver's pictures again, follow the 
           process of (c), the system will auto detect 1 Modem device. 
	   In the following screen appears with a list of available 
  	   devices that you may install (in this case, only Magic MP32 V.34
	   Data + Fax + Voice Modem appears on the list).

[Unistall]:  

            (A)Under the Audio Driver's Disk,  you can find the 
               "Rem_MP32.exe" program.
               You can run the program to uninstall the audio driver.

          Or(B)Open the "Control Panel" , "Add/Remove Programs" , Select
               "Uninstall Magic MP32 PnP Audio card . " , then select
               "Add/Remove" .

          Or(C)Under the \Windows path,you can find "Rem_MP32.inf" ,right
               click the mouse button on the file . Then select "Install" 
               to uninstall the  Audio+Modem card driver.

[Tips for Install]:
                   (A) MS_DOS volume control :
                       You can run file "cs32mix.exe" for open the DOS 
                       Mixer volume control . 
                     
[Music Center]:
               After installed the audio card , we also setup a music
               software application .
               You can run the application by clicking "Start","Programs",
               "Magic MP32" , "Music Center" .    
               About the detailed help , please see the "Help" from 
               "Music Center" .
                     
[Trouble Shooting]:
               If you insert our combo card to the mainboard,and setup the
               Windows'95 O.S. After the Win'95 been build up,the Win'95 
               may install the "Sound Blaster" driver as the audio driver.
               So,you should run the "Rem_MP32.exe" in our Audio driver disk.
               It will remove the Sound Blaster driver first, then restart
               the computer. The Win'95 will auto detect our audio card,
               and you can insert our driver and begin to install the 
               correct audio driver.