Broadcom Corporation 16215 Alton Parkway, Irvine, CA 92619-7013 Release Notes Broadcom BCM570x EFI Driver for IA-32 and IA-64 11/19/2001 Introduction ============ This file describes the EFI driver for Broadcom's BCM570x 10/100/1000 Mbps Ethernet Network Interface Controller. Driver is released as a standard EFI driver format for both EFI core firmware 1.0.2 and 1.1. 1. b57undi32.efi : EFI driver for IA-32 platform. 2. b57undi64.efi : EFI driver for IA-64 platform. Installing Driver ================= Drivers for core firmware v1.02 and v1.1 are built based on EFI SDK 1.02.12.38 and EFI SDK 1.1.14.50, respectively. The same version of the efildr should be used on IA32 systems. The driver is compatible with efildr that is deployed on most IA64 systems. 1. Boot into EFI shell. 2. Load b57undi32.efi in IA-32 platform OR Load b57undi64.efi in IA-64 platform 3. If SNP is loaded by core firmware then skip to step 4. Otherwise, Load snp3264.efi. 4. For drivers running on core firmware v1.1, then start the drivers connect -r 5. Once driver is loaded, TCP/IP stack can be loaded into the memory as follows: load tcpipv4.efi 6. Configure interface as follows ifconfig sni0 30.2.1.1 up 7. Ping remote station, etc.... Revision History ================ v2.0.5 (11/19/01) - Added description of what slot (PCI or PCI-X) the NIC/LOM is installed on when it's detected. v2.0.4 (11/16/01) - Added support for EFI core firmware v1.1. - Fixed a problem where performance of TCP/UDP traffic is intermittently slow. v2.0.3 (10/29/01) - Built specificially for core firmware V1.02.12.32 and older. This version of driver doesn't raise/restore priority level as done to work around an issue in SNP module of core firmware v1.02.12.36 Or newer. v2.0.2 (10/26/01) - Fixed a problem Bond ID is not checked correctly. v2.0.1 (10/19/01) - Added support for BCM5702 and BCM5703 NICs/LOMs. v2.0.0 (09/06/01) - Fixed a problem where application (pktsnoop) cannot monitor packet with invalid 802.3 length fields. - Fixed a problem where system intermittently crashes during continous file transfer. - Added Fiber NIC support. v0.03 (08/31/01) - Added support for BCM5701. - Fixed problem with loading driver on IA-32 (CQ#2009). - Fixed problem when assigning IP address on IA-32 (CQ#2300). - Fixed pktxmit.efi crashing problem (CQ#2302). - Added a workaround to minimize the race condition on SNP v0.02 (08/18/01) - Fixed problem with ping on IA-64 (CQ#1960). v0.01 (05/14/01) - First Release. Known Problems ============== 1. Since the driver is built based on the latest EFI SDK (v1.02.12.38), it may not work with the efildr of the previous version on IA32. However, it is compatible with the efildr that is deployed on most IA64 systems (v1.02.12.36a).Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.