1. 315v2.zip Driver
2. W95osr2.txt File Contents

W95osr2.txt Driver File Contents (315v2.zip)

   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
                  Installation for Windows 95OSR2                          ³
   ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ



  A. Installation:
  Before starting with the installation process, make sure that the adapter
  is properly installed and configured.

   1.When you plug the AOpen AON-315 in the mother board and power on the Windows
     95 OSR2, the 'Update Device Driver Wizard' window will prompt and say
     that

     The wizard will complete the installation of
          PCI Ethernet Controller

   2.Click 'Next' then it will say
     'Windows was unable to locate a driver for this device'.
     Click 'Other Location' button.

   3.Put the driver disk in the floppy drive and enter the driver path i.e.
     'A:\W95OSR2' in Location Field and click 'OK'.

   4.It will show that Windows found the following updated driver for this
     device:

         AOpen AON-315 10/100M Fast Ethernet PCI Adapter  

     And
     Location of Driver
          A:\W95OSR2

     Click 'Finish'.


   5.If this is your first time to install the Ethernet adapter and have not
     install the protocols and clients for Microsoft and Netware, please do
     NOT restart the computer.Go to the Start\Settings\Control and
     double-click the Network icon to install the other necessary files for
     the network operation.
     Windows 95 OSR2 will ask you Do you want to restart your computer now?,
     Click 'Yes' to restart the Windows 95 OSR2.

   B. Change the property of AOpen AON-315:
      There are some properties that you can change for your application.

      1. Connection Type:

          AutoSense                   Senses dynamically the media ports

          10BaseT (TP)                To connect 10BaseT Ethernet hubs

          10BaseT (TP) Full Duplex    To connect 10BaseT Full Duplex hubs
       
          10BaseT (TP) No_Link_Test   To connect hubs not supporting
                                       the Link Integrity Test

          100BaseTx (TP 100)          To connect 100BaseTx Ethernet hubs

          100BaseTx (TP 100) FDx      To connect 100BaseTx Full Duplex hubs

        You can change the speed to be 10M or 100M and change to be the Full
        duplex or Half duplex.
        The default value is Auto Mode,i.e. AOpen AON-315 will talk with connection
        Hub or Switch with auto-negotiation to decide the optimal connection
        type.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.