ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Installation for NetWare Server ODI ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ A. Software Revision Requirements: o NetWare version 3.12 or above. o Novell support modules as supplied in kit directories. B. Supplied Files: Table 1: The Novell NetWare ODI Server Directory Files --------------------------------------------------------------------- AON315.LAN AON315 Novell NetWare ODI server driver. --------------------------------------------------- AON315.LDI Novell network installation file for this driver --------------------------------------------------- AON315.INF Novell network Windows 95 installation file for this driver --------------------------------------------------- ETHERTSM.NLM Novell TSM needed to run the ODI server driver --------------------------------------------------- MSM31X.NLM Novell MSM needed to run the ODI server driver with NetWare v3.1x --------------------------------------------------- NBI31X.NLM Novell NBI needed to run the ODI server driver with NetWare v3.12 --------------------------------------------------- LSWAP.EXE For Netware 3.12 you must download the LOADER.EXE LOADER.EXE and LSWAP.EXE provided by Novell. Then copy them to the NWSERVER directory and run the LSWAP.EXE to update the loader segment in the server.exe file. This is required by Novell in order for the NBI31X/MSM31X to function correctly. -------------------------------------------------------------------- C. Installing Software: 1. NetWare v3.12 installation: 1.1 Copy The AON315.LAN to the SYS:\SYSTEM directory on the NetWare server. 1.2 Add to your AUTOEXEC.NCF the line required to load the AON315.LAN and bind it. Refer to the sample AUTOEXEC.NCF for more information (according to the type of NetWare you are using, i.e. v3.12 or 4.x). 1.3 For Netware 3.12 ONLY you must copy the LOADER.EXE and LSWAP.EXE to the NWSERVER directory and run the LSWAP.EXE to update the loader segment in the server.exe file. This is required by Novell in order for the NBI31X/MSM31X to function correctly. 2. NetWare v4.x installation: 2.1 Have ready a diskette with AON315.LAN and AON315.LDI both from the driver's kit. 2.2 On the server's prompt type: LOAD INSTALL 2.3 When the install program comes up, choose the menu item that refers to NETWORK DRIVERS. Note that this menu item is on different place on different NetWare versions (i.e. v4.0x vs. 4.1x). 2.4 Install the network driver AON315.LAN according to the NetWare manual, or use the on-line instructions and help. NOTE: The 3.12 and 4.x driver (one and the same) use the NBI layer from Novell. 3. NetWare v5.x installation: 3.1 Execute "LOAD NWCONFIG" after booting up. Type: LOAD NWCONFIG 3.2 Select "Driver options", -> "Configure network drivers", and -> "Select a driver". 3.3 Press <Insert> key to install an unlisted driver. 3.4 Please insert release driver diskette into floppy disk. 3.5 Press <F3> to specify a different <PATH>. <PATH> is directory which include both AON315.LAN and AON315.LDI Ex. A:\NWSERVER\ 3.6 Select "AON315.LAN ...". 3.7 Select "Save parameters and load driver" after configuring adapter setting. 3.8 NetWare server will loading/binding driver automatically. 3.9 After the driver has been loaded, check whether all the frame types you want are specified for this driver in AUTOEXEC.NCF. D. Parameters The following parameters belong on the server's command line, or in the load line inside the AUTOEXEC.NCF. The general way of using these parameters is: LOAD <driver name> <PARAMETER NAME>... <PARAMETER NAME[=VALUE]> Example: LOAD <driver name> TURBO SLOT=16 FRAME=Ethernet_802.2 ------------------------------------------------------------------ NOTE that wrong values (such as 'line_speed=128') are IGNORED, and a default value is taken instead. ------------------------------------------------------------------ Driver specific parameters list (as for NetWare standard parameters, please see the NetWare user's manual): TP selects TP port. TP_NO_LINK_TEST selects twisted pair connection, but disables the LINK test for specific HUBs that do not support LINK. TP_FULL_DUPLEX selects twisted pair connection to work in full duplex mode. TURBO Fixes the problem of multiple transmit underflows and receive overflows (i.e. lose of packets) in systems that use certain PCI chipsets. LINE_SPEED selects line speed between 10MPBs and 100MBPs. Format: LINE_SPEED=<value> Allowed values are: 10,100 GENERAL_PURPOSE_CONTROL user override of the control value in the GENERAL_PURPOSE register. Normally, this value should not be changed. Format: GENERAL_PURPOSE_CONTROL=<Hexadecimal Value> Allowed values: in the range 1FF-0 hex. GENERAL_PURPOSE_DATA user override of the data value in the GENERAL_PURPOSE register. Normally, this value should not be changed. Format: GENERAL_PURPOSE_DATA=<Hexadecimal Value> Allowed values: in the range 1FF-0 hex.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.