ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex EN2000N Ethernet Adapter º
º Copyright (C) 1995 by PDS. All Rights Reserved º
º Release Date : Aug 24, 1995 º
º (950824) º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
INTRODUCTION
============
This is a reference for the EN2000N User Diagnostic Version 1.10
(EN2DIAG.EXE v1.10).
Important: This diagnostic program does not work if the EN2000N adapter is
placed at the 8-bit slot.
There are three tests to verify the functionality of the network
adapter. These tests are performed in sequence. However, if any one
test were to fail, the remaining tests will not be continued.
The On Screen Diagnostic window will show you the progress of
the three tests. The details are described as follow.
A) [Initialization]
In this test, all NIC registers are tested and verified.
B) [RAM Test]
This test perform Read-After-Write test on the memory module on the
network adapter. It verifies the address, the data paths and
the memory modules separately.
C) [IRQ Test]
This test checks the configured IRQ# of the adapter.
The test initiates the transmission of frames through the adapter
and then checks the interrupt line on the system.
Note that you should choose an interrupt line that DOES NOT
conflict with other adapters' settings, otherwise the system MAY HANG.
REMEMBER to terminate the adapter.
Provided by:-
Compex Inc.
4051 E,La Palma
Anaheim, CA 92807
USA
======================== END =============================================
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.