1. 325cv111.zip Driver
2. MSLANMAN.TXT File Contents

MSLANMAN.TXT Driver File Contents (325cv111.zip)

   LAN Manager Workstation/Server

   Introduction:
   -------------
   This document describes the procedure to setup Microsoft LAN Manager
   Workstation/Server driver for AOpenLAN ALN-325 10/100 Base-TX Fast       Ethernet Adapter.

   Location of Driver: \MSLANMAN.DOS\DRIVERS\ETHERNET\ALN325\ALN325.DOS


   Sample Configuration Files:
   ---------------------------
      CONFIG.SYS :

          DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
          DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\ALN325\ALN325.DOS

 
   Setup Procedures:
   -----------------
      Before you start with the installation process, make sure that the
      adapter  is properly  installed and  configured.  Make  sure  your
      Microsoft LAN Manager is properly installed.

      1. Run the appropriate Microsoft Lan Manager SETUP for computer you
         are setting up. Select "Configuration" item ,select the
         <Other Driver> item (the AOpenLAN driver isn't included on the
         LAN Manager disk) and insert the AOpenLAN driver disk,specify the
         drive name of the driver disk (don't specify the path name),
         and follow the directions.

      2. When completed, reboot your computer .


   NOTES:
   ------

       Sample PROTOCOL.INI for LAN Manager:

           [PROTMAN]
           DRIVERNAME = PROTMAN$
           DYNAMIC = YES
           PRIORITY = NETBEUI

           [NETBEUI_XIF]
           Drivername = netbeui$
           SESSIONS = 6
           NCBS = 12
           BINDINGS = "ALN325_NIF"
           LANABASE = 0

           [ALN325_NIF]
           ;
           ; ALN325 PROTOCOL.INI Sample Adapter
           ;
           DriverName = ALN325$
 

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.