Installing the OmniBook DOCKBOOT.SYS:
=====================================
The HP OmniBook 5700 DOCKBOOT.SYS is located on the OmniBook hard disk
in the C:\OMNIBOOK\DRIVERS\WFW\DOCKBOOT directory or on the Recovery CD in
the \OMNIBOOK\DRIVERS\WFW\DOCKBOOT directory.
DOCKBOOT.SYS is used to determine which MS-DOS Menu item is the default
when the HP OmniBook 5700 is docked. The syntax is as follows:
device=[drive]:\[directory]\dockboot.sys /[default menu number]
NOTE: DOCKBOOT.SYS must be the FIRST line in CONFIG.SYS
1. From the DOS prompt or Windows File Manager, create a directory on the
hard disk called C:\OMNIBOOK.
2. Copy DOCKBOOT.SYS to C:\OMNIBOOK.
3. Edit \CONFIG.SYS and add the following lines.
4. Reboot the OmniBook.
config.sys
----------
REM Must be loaded first. Force different option if docked...
device=c:\omnibook\dockboot.sys /3
[menu]
menuitem=Windows, Windows Only -- Default
menuitem=MS-DOS, MS-DOS
menuitem=Docked, Windows & Docking System
menudefault=Windows,3
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.