Wishblade Inc.
Wishblade Advanced (OPS656-XG1) Ver.1.21 Supplementary Information
-------------------------------------------------------------------------------
Introduction
This file provides important information on the use of the Wishblade Advanced
(OPS656-XG1).
Be sure to read through this file carefully before attempting to use the
Wishblade Advanced.
Operating Environment
OS : Windows 98 Second Edition, Windows Me, Windows 2000, Windows XP
CPU : Pentium III 600 MHz or more
Memory : 128 MB or more (at least 256 MB recommended)
Monitor : Capable of displaying 1024 x 768 pixels, High Color
(True Color recommended)
Mouse
CD-ROM Drive
Installation
Run the SETUP.EXE file to begin installation. Follow the on-screen
instructions to complete the installation.
Usage Precautions
1) Correct operation with either Windows 95 or Windows NT 4.0 is not
guaranteed.
2) Please refer to the Wishblade User's Manual for information on
registration mark alignment.
3) If you load metafiles (files with a WMF or EMF extension) on a computer
running Windows 98 or Me, please note that the following problems may
occur, due to Windows limitations:
* Certain colors may be missing, or not displayed.
* Certain colors may be missing if expand/reduce and re-display
operations are repeated.
* The file may not be loaded if there is a large amount of data.
4) When using the function "Rotate 180 degrees" in Printer settings of
Output settings, a part of image may not be printed with certain
printers.
In this case, please print without using the function "Rotate 180
degrees".
If the registration mark(s) is moved to out side of printing area when
you turn off this function, please adjust the location of registration
mark(s).
5) If Cropping will be performed in Output Settings >Common Settings,
please use a size smaller than A4. In addition, please use a smaller
size when using this function together with the Tiling function in
Output Settings.
6) We recommend that an inkjet printer be used for printing images that
will be cut on the Wishblade. With laser printers, the printed images
may become distorted due to paper skew or slanted feeding. This makes
it difficult to align the cutlines with the pre-printed images for print
& cut operations, and there may be large discrepancies in the alignment
positions, especially in areas that are not close to the registration
marks.
7) Do not run the Wishblade Advanced controller or press the Wishblade
Advanced Controller button while the Wishblade is operating.
All the brand names and product names listed in this document are the
trademarks or registered trademarks of their respective owners.
* Wishblade is trademark of Wishblade Inc.
* Graphtec has exclusive copyrights to the Wishblade Advanced software,
and OPS656 product names.
END
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.