BeWAN ADSL st Version 1.9.0.10 1) English 2) French 3) PROFILS DETAILS - DETAILS DES PROFILS ------------------1------------------ ---------------- | INSTALLATION | ---------------- If you already have an older version of the drivers, you can do an update by double clicking on setup.exe file which is extracted by default in C:\ADSL\ST\xxxxxxx (xxxxxxx : Version Number). Only for USB interface Modem : ---------------------------------- | USB TROUBLESHOOTING 02/21/2002 | ---------------------------------- Windows 98 First Edition: ------------------------- The Service Pack 1 for Windows 98 (SP1) must be installed in the machine. Windows 98 Second Edition: -------------------------- If the USB Host controller is an Open HCI controller, the version of the file openhci.sys must be greater than 4.10.0.2228 Please apply the patch from Microsoft Knowledge Base (KB) F263218/Q253697 Windows XP: ----------- If the USB Host controller is an Universal HCI controller, Please apply the Windows XP Hotfixes service pack 1 or 1a and KB822603 from Windows Update. For all Operating Systems: -------------------------- DMA transfers must be validated for hard disks and CDRoms/DVDRoms. Windows 98/Millenium: My Computer -> Properties -> Device Manager: Disk Drives -> GENERIC IDE DISK TYPE47 -> Properties -> Settings: - Check the DMA box CDROM -> <CDROM Name> -> Properties -> Settings: - Check the DMA box Windows 2000/XP: My Computer -> Properties -> Hardware -> Device Manager: IDE ATA/ATAPI controllers -> Primary/Secondary IDE channel: Properties -> Advanced Settings: - Transfer Mode: DMA if available - Current Transfer Mode: DMA or Ultra DMA Generally speaking: ------------------- Recent motherboards need to have up-to-date drivers for the onboard chipsets. -----------------2------------------- ---------------- | INSTALLATION | ---------------- Si vous possédez une ancienne version des pilotes vous pouvez faire une mise à jour en double cliquant sur le fichier setup.exe se trouvant, par défaut, après décompression des pilotes dans le répertoire c:\adsl\st\xxxxxxx (xxxxxxx : Numéro de version). Seulement pour les Modem avec Interface USB : ------------------------------------ | DYSFONCTIONNEMENT USB 21/2/2002 | ------------------------------------ Windows 98 Première Edition: ---------------------------- Le Service Pack 1 pour Windows 98 (SP1) doit être installé. Windows 98 deuxième Edition: ---------------------------- Si le contrôleur d'hôte PCI vers USB est un contrôleur Open HCI, la version du fichier openhci.sys doit être supérieure à 4.10.0.2228 Veuillez appliquer le correctif de la base de connaissance Microsoft (KB) F263218/Q253697. Windows XP: ----------- Si le contôleur d'hôte PCI vers USB est un contrôleur Universal HCI Veuillez appliquer les correctifs Windows XP service pack 1 ou 1a et KB822603 de Windows Update. Pour tous les systèmes d'exploitation: -------------------------------------- Les transferts DMA doivent être activés pour les disques durs et les CDRoms/DVDRoms. Windows 98/Millenium: Poste de travail -> Propriétés -> Gestionnaire de périphériques: Lecteurs de disque -> GENERIC IDE DISK TYPE47 -> Propriétés -> Paramètres: - Cocher DMA CDROM -> <Nom du lecteur de CDRom> -> Propriétés -> Paramètres: - Cocher DMA Windows 2000/XP: Poste de travail -> Propriétés -> Matériel -> Gestionnaire de périphériques: Contrôleur ATA/ATAPI IDE -> Canal IDE principal/secondaire: Propriétés -> Paramètres avancés: - Mode de transfert: DMA si disponible - Mode de transfert actif: DMA ou Ultra DMA De manière générale: -------------------- Sur les cartes mères récentes vous devez acquérir les dernières mise à jour de pilotes des chipsets intégrés à la carte. -------------------3--------------------- ----------------------------------------- | PROFILS DETAILS - DETAILS DES PROFILS | ----------------------------------------- belgium1.ins -> Belgium - Wanadoo - PPPoE (VPI=8, VCI=35) / ANSI (T1.413 issue 2) belgium2.ins -> Belgium - PPPoE (VPI=8, VCI=35) / ANSI (T1.413 issue 2) belgium3.ins -> Belgium - Belgacom ADSL - PPPoE (VPI=8, VCI=35) / ANSI (T1.413 issue 2) espana1.ins -> España - Routed IP (VPI=8, VCI=32) / ANSI (T1.413 issue 2) espana2.ins -> España - PPPoA (VPI=8, VCI=32) / ANSI (T1.413 issue 2) espana3.ins -> España - PPPoE (VPI=8, VCI=32) / ANSI (T1.413 issue 2) espana4.ins -> España - PPPoA (VPI=8, VCI=35) / ANSI (T1.413 issue 2) espana5.ins -> España - Tele2 - PPPoA (VPI=8, VCI=35) / G.dmt (G.992.1) espana6.ins -> España - Tele2 - PPPoE (VPI=8, VCI=35) / G.dmt (G.992.1) finland1.ins -> Finland - Bridged Ethernet (VPI=0, VCI=100) / ANSI (T1.413 issue 2) france1.ins -> France - PPPoA (VPI=8, VCI=35) / G.dmt (G.992.1) france2.ins -> France - LDCOM - PPPoA (VPI=8, VCI=35) / G.dmt (G.992.1) france3.ins -> France - PPPoE (VPI=8, VCI=35) / G.dmt (G.992.1) france4.ins -> France - Passerelle Ethernet (VPI=8, VCI=35) / G.dmt (G.992.1) france5.ins -> France - AOL - Passerelle Ethernet (VPI=8, VCI=35) / Multimode (G.992.1,T1.413 issue 2) france6.ins -> France - PPPoA (VPI=8, VCI=67) / G.dmt (G.992.1) france7.ins -> France - PPPoE (VPI=8, VCI=67) / G.dmt (G.992.1) france8.ins -> France - Passerelle Ethernet (VPI=8, VCI=67) / G.dmt (G.992.1) france9.ins -> France - PPPoA (VPI=2, VCI=32) / G.dmt (G.992.1) france10.ins -> France - PPPoE (VPI=2, VCI=32) / G.dmt (G.992.1) france11.ins -> France - Passerelle Ethernet (VPI=2, VCI=32) / G.dmt (G.992.1) france12.ins -> France - Tele2 - PPPoA (VPI=8, VCI=35) / G.dmt (G.992.1) france13.ins -> France - OOL - PPPoA (VPI=8, VCI=35) / G.dmt (G.992.1) france14.ins -> France - Free - IP routé (VPI=8, VCI=36) / G.dmt (G.992.1) france15.ins -> France - OOL - PPPoE (VPI=8, VCI=35) / G.dmt (G.992.1) france16.ins -> France - Cegetel - PPPoA (VPI=8, VCI=35) / Multimode (G.992.1,T1.413 issue 2) fscfr1.ins -> France - PPPoA (VPI=8, VCI=35) - Partage et Pare-Feu / G.dmt (G.992.1) fscfr2.ins -> France - LDCOM - PPPoA (VPI=8, VCI=35) - Partage et Pare-Feu / G.dmt (G.992.1) fscfr3.ins -> France - PPPoE (VPI=8, VCI=35) - Partage et Pare-Feu / G.dmt (G.992.1) fscfr6.ins -> France - PPPoA (VPI=8, VCI=67) - Partage et Pare-Feu / G.dmt (G.992.1) fscfr7.ins -> France - PPPoE (VPI=8, VCI=67) - Partage et Pare-Feu / G.dmt (G.992.1) fscfr9.ins -> France - PPPoA (VPI=2, VCI=32) - Partage et Pare-Feu / G.dmt (G.992.1) fscfr10.ins -> France - PPPoE (VPI=2, VCI=32) - Partage et Pare-Feu / G.dmt (G.992.1) fscfr12.ins -> France - Tele2 - PPPoA (VPI=8, VCI=35) - Partage et Pare-Feu / G.dmt (G.992.1) fscfr13.ins -> France - OOL - PPPoA (VPI=8, VCI=35) - Partage et Pare-Feu / G.dmt (G.992.1) fscfr15.ins -> France - OOL - PPPoE (VPI=8, VCI=35) - Partage et Pare-Feu / G.dmt (G.992.1) fscfr16.ins -> France - Cegetel - PPPoA (VPI=8, VCI=35) - Partage et Pare-Feu / Multimode (G.992.1,T1.413 issue 2) gen1.ins -> Generic - PPPoA (VPI=8, VCI=35) / ANSI (T1.413 issue 2) gen2.ins -> Generic - PPPoE (VPI=8, VCI=35) / ANSI (T1.413 issue 2) gen3.ins -> Generic - Bridged Ethernet (VPI=8, VCI=35) / ANSI (T1.413 issue 2) germany1.ins -> Germany - PPPoE (VPI=1, VCI=32) / ANSI (T1.413 issue 2) hungary1.ins -> Hungary - PPPoE (VPI=1, VCI=32) / ANSI (T1.413 issue 2) italia1.ins -> Italia - PPPoA (VPI=8, VCI=35) / ANSI (T1.413 issue 2) italia2.ins -> Italia - Tiscali - PPPoA (VPI=8, VCI=35) / ANSI (T1.413 issue 2) italia3.ins -> Italia - Tele2 - PPPoA (VPI=8, VCI=35) / G.dmt (G.992.1) netherland1.ins -> Netherland - Wanadoo - PPPoA (VPI=8, VCI=48) / ANSI (T1.413 issue 2) netherland2.ins -> Netherland - PPPoA (VPI=8, VCI=48) / ANSI (T1.413 issue 2) netherland3.ins -> Netherland - Planet Internet - PPPoA (VPI=8, VCI=48) / ANSI (T1.413 issue 2) osterreich1.ins -> Osterreich - PPPoA (VPI=8, VCI=48) / G.dmt (G.992.1) poland1.ins -> Poland - PPPoA (VPI=0, VCI=35) / ANSI (T1.413 issue 2) portugal1.ins -> Portugal - PPPoE (VPI=0, VCI=35) / ANSI (T1.413 issue 2) sweden1.ins -> Sweden - Bridged Ethernet (VPI=8, VCI=35) / ANSI (T1.413 issue 2) sweden2.ins -> Sweden - Tele2 - PPPoE (VPI=8, VCI=35) / ANSI (T1.413 issue 2) switzerland1.ins -> Switzerland - Bluewin SA -PPPoE (VPI=8, VCI=35) / ANSI (T1.413 issue 2) switzerland2.ins -> Switzerland - VTX - PPPoA (VPI=8, VCI=35) / ANSI (T1.413 issue 2) switzerland3.ins -> Switzerland - PPPoA (VPI=8, VCI=35) / ANSI (T1.413 issue 2) switzerland4.ins -> Switzerland - PPPoE (VPI=8, VCI=35) / ANSI (T1.413 issue 2) uk1.ins -> UK - PPPoA (VPI=0, VCI=38) / (G.992.1, T1.413 issue 2) uk2.ins -> UK - AOL - PPPoA (VPI=0, VCI=38) / (G.992.1, T1.413 issue 2) uk3.ins -> UK - AOL (future) - Bridged Ethernet (VPI=0, VCI=38) / (G.992.1, T1.413 issue 2) uk4.ins -> UK - Freeserve Broadband - PPPoA (VPI=0, VCI=38) / G.dmt (G.992.1) uk5.ins -> UK - BT Openworld - PPPoA (VPI=0, VCI=38) / ANSI (T1.413 issue 2)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.