;*********************************************************************** ; Genius GF100TXRII PCI Fast Ethernet miniport driver for WINNT3.5x * ;*********************************************************************** [Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA "Jazz-Internal Bus" [Options] RTL8139 [FileConstants] UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "KYE" ProductMajorVersion = "1" ProductMinorVersion = "1" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "RTL8139" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\RTL8139.sys" NetRuleSoftwareType = "RTL8139Sys ndisDriver RTL8139Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """RTL8139Sys"" yes no container" NetRuleSoftwareClass = {"RTL8139Driver basic"} NetRuleSoftwareBindable = {"RTL8139Driver RTL8139Adapter non exclusive 100"} ProductHardwareName = "RTL8139" NetRuleHardwareType = "RTL8139 RTL8139Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"RTL8139Adapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers NT350VersionConstant = "3.50" NT310VersionConstant = "3.10" [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set !G:DebugOutputControl = 1 set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] Debug-Output "clt begin Install Option sectoin " set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif Debug-Output "clt begin to run " set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + Debug-Output "clt after begin: " set ActivateDetection = FALSE ;; ;; Get the Version of Windows NT we are installing on. This will allow us to use the ;; PCI Support that will be included in NT v3.51 ;; set CurrentVersionValue = "" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt Ifstr(i) $(KeyNt) != "" GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue Debug-Output "$(InfFile) $(Option): WinNT CurrentVersion ="$(CurrentVersionValue) CloseRegKey $(KeyNt) Endif ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant) ;; NT v3.10 not supported! Debug-Output "$(InfFile) $(Option): Configureadapter" set Error = "Windows NT v3.10 is not support by this product" goto fatal endif Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set CommonStatus = STATUS_REBOOT set ActivateDetection = TRUE set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the GF100TXRII PCI Fast Ethernet Adapter driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE set ActivateDetection = TRUE endif Debug-Output "clt: ==================================================" Debug-Output "clt: STF_CWDIR is: "$(!STF_CWDIR) Debug-Output "clt: STF_LANGUAGE is: "$(!STF_LANGUAGE) Debug-Output "clt: Option is: "$(Option) Debug-Output "clt: !STF_NCDETECT is: "$(!STF_NCDETECT) Debug-Output "clt: !STF_NCOPTION is: "$(!STF_NCOPTION) Debug-Output "clt: !STF_NCDETCARD is: "$(!STF_NCDETCARD) Debug-Output "clt: !STF_NCDETINFO is: "$(!STF_NCDETINFO) Debug-Output "clt: ==================================================" Set DetectedCard = FALSE Set EtherID = "" Ifstr(i) $(ActivateDetection) != TRUE Goto skipdetection Endif skipdetection =+ Debug-Output "clt after skipdetection " set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + ;;;;;;;;;;;12/09/1996 clt ;;;;;;;;;;;;;;;;;;;;;;; ;;install "Install-RSET" ; copy tracer.dll to winnt35/system32 install "Install-help" ; copy sample.hlp to winnt35/system32 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Debug-Output "clt after installadapter " OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif endif Ifstr(i) $(DetectedCard) != TRUE Goto adaptersetup Endif StartWait Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD) EndWait Ifstr(i) $($R0) != STATUS_SUCCESSFUL Goto adaptersetup Endif Set DetectedParams = $($R1) Debug-Output "clt: Calling Param_SetDefaults to merge detected params" Shell $(ParamInf) Param_SetDefaults $(DetectedParams) goto adapteroptions configureadapter = + Debug-Output "clt after configureadapter: " Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "Speed" set speed = $(ValueData) else-ifstr(i) $(ValueName) == "SlotNumber" set DeviceNum = $(ValueData) else-ifstr(i) $(ValueName) == "EtherID" set EtherID = $(ValueData) else-ifstr(i) $(ValueName) == "BusType" set BusInterfaceType = $(ValueData) else-ifstr(i) $(ValueName) == "BusNumber" set BusNum = $(ValueData) else-ifstr(i) $(ValueName) == "FunctionNumber" set FunctionNum = $(ValueData) endif EndForListDo adaptersetup =+ Debug-Output "clt after adaptersetup: " Shell $(ParamInf) Param_ParameterConfidence Ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "OEMNADE2.INF: parameter confidence too low to bypass configuration" Goto adapteroptions Endif Ifstr(i) $(DetectedCard) == TRUE Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM Goto adapterverify Endif Endif goto adapteroptions adapteroptions = + Debug-Output "clt after adapteroptions: " set from = adapteroptions ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" ifstr(i) $(!AutoNetInterfaceType) != "" set BusInterfaceType = $(!AutoNetInterfaceType) else set BusInterfaceType = 1 endif ifstr(i) $(!AutoNetBusNumber) != "" set BusNumber = $(!AutoNetBusNumber) else set BusNumber = 0 endif goto adapterverify endif set EtherID = "" set BusInterfaceType = 5 ;;;; pci 0x5 set BusNumber = 0 adapterverify =+ Debug-Output "clt after adapterverify: " Ifstr(i) $(DetectedCard) != TRUE Debug-Output "clt detectedcard != TRUE: " Goto skipoptions Endif Debug-Output "clt: Calling Param_VerifyCard" Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD) Ifstr(i) $($R0) == STATUS_SUCCESSFUL Debug-Output "clt: Param_VerifyCard succeeded" Goto skipoptions Endif Set from = adapteroptions Set to = skipoptions Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto Warning skipoptions =+ Debug-Output "clt after skipoptions: " ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ;;;;;;;clt 12/06/1996 ;;;begin ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Debug-Output "$(InfFile) $(Option): About to look for 3Com PCI Cards" ;; ;; We must be installing a PCI card. ;; ;; Note: If we are are on WinNT v3.51 and above, we have PCI detection support ;; and are able to setup the adapter without user intervention. Otherwise, we can ;; only do one card at a time. ;; set TargetVersion = *($(CurrentVersionValue),4) Debug-Output "$(InfFile) $(Option): Current Version:"$(TargetVersion) ifstr $(TargetVersion) == $(NT350VersionConstant) ;; We need to ask on v3.50 Debug-Output "Running on WindowsNT 3.50" set Version350 = $(TRUE) else Debug-Output "Running on WindowsNT 3.51" set Version350 = $(FALSE) endif ifint $(Version350) == $(TRUE) Debug-Output "Running on WindowsNT v3.50, Not using PCI Detection!!!" ifstr $(!STF_GUI_UNATTENDED) == "YES" Debug-Output "$(InfFile) $(Option): Running in GUI unattended mode" ifstr(i) $(!AutoNetInterfaceType) != "" set BusInterfaceType = $(!AutoNetInterfaceType) else set BusInterfaceType = 5 endif ifstr(i) $(!AutoNetBusNumber) != "" set BusNumber = $(!AutoNetBusNumber) else set BusNumber = 0 endif set NTDetected = $(FALSE) set AdapterList = $(Option) ;; 1 Item to install Debug-Output "$(InfFile) $(Option): BusInterfaceType = $(BusInterfaceType)" Debug-Output "$(InfFile) $(Option): BusNumber = $(BusNumber)" else Debug-Output "$(InfFile) $(Option): Running 3.50 Bus Dialog" set BusInterfaceType = 5 set BusNumber = 0 set NTDetected = $(FALSE) Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set BusInterfaceType = $($R1) set BusNumber = $($R2) set AdapterList = $(Option) ;; 1 Item to install Debug-Output "$(InfFile) $(Option): BusInterfaceType = $(BusInterfaceType)" Debug-Output "$(InfFile) $(Option): BusNumber = $(BusNumber)" endif else ;jack nt4.0 ;; ;; v3.51 has PCI detection code built in. ;; ;;set BusInterfaceType = 5 ;;set BusNumber = 0 ;; Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber) set NTDetected = $(TRUE) set Vendor = 4332 ;; 0x10b7 is 3Com's Vendor ID! set DevID = 33081 ;; 0x10b7 is 3Com's Vendor ID! set CFIDList = $($(Option)CFIDList) Debug-Output "$(InfFile) $(Option): VendorID = $(Vendor)" Debug-Output "$(InfFile) $(Option): CFIDList = $(CFIDList)" set AdapterList = {} ForListDo $(CFIDList) set-div CFID = $($) 1 Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(DevID) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ForListDo $($R0) set AdapterList = >($(AdapterList), $($)) EndForListDo EndForListDo ifstr(i) $(AdapterList) == {} set Error = $(CANNOT_FIND_ANY_CARD) set CommonStatus = USER_CANCEL set from = end goto nonfatal endif endif ;;; NT v3.50 ifint $(OldVersionExisted) == $(FALSE) Debug-Output "clt: enter if( oldverexisted == false) " ifstr(i) $(!NTN_InstallMode) == "install" Debug-Output "clt: enter if( NTN_InstallMode == install) " Ifstr(i) $(DoCopy) == "YES" Debug-Output "clt: enter if( Docopy == YES) " Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif ;;;;;;;clt begin for loop ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Debug-Output "$(InfFile) $(Option): Adapterlist = $(AdatperList)" ForListDo $(AdapterList) Set InstallCard = "YES" ifint $(NTDetected) == $(TRUE) set BusNum = *($($),1) set DeviceNum = *($($),2) set FunctionNum = *($($),3) Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), + $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) == "YES" set InstallCard = "NO" ;; Don't want to re-install, it's there already endif endif ;; ;; Are we installing the card? ;; Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) ;;;;goto writeparameters ;;;writeparameters = + ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;clt 11/25/1996;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; set SpeedValue1 = "auto" set speed = "auto" set cltlist = {"auto", "10" ,"100"} read-syms SpeedDlg$(!STF_LANGUAGE) Debug-Output "clt before ui start inputDlg: " SetHelpFile $(!STF_WINDOWSSYSPATH)"\"sample.hlp 10 20 10 ui start "InputDlg" Debug-Output "clt after ui start inputDlg: " ifstr(i) $(DLGEVENT) == "CONTINUE" set speed = $(ListItemsOut) Debug-Output "clt Continue:"$(speed) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" ;;;;;; set CommonStatus = STATUS_USERCANCEL Debug-Output "select speed cancel." ui pop 1 goto end else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; set NewValueList = {{EtherID,$(NoTitle),$(!REG_VT_SZ),$(EtherID)},+ {Speed,$(NoTitle),$(!REG_VT_SZ),$(speed)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+ {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif Debug-Output "clt: leave if (R1 != yes)" endif ;;;;;;NO end;;;;;;;;;;;;;;;;;;;;;; EndForListDo EndWait goto successful ;;;;goto writeparameters ;;;writeparameters = + ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;clt 11/25/1996;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; set SpeedValue1 = "auto" set speed = "auto" set cltlist = {"auto", "10" ,"100"} read-syms SpeedDlg$(!STF_LANGUAGE) Debug-Output "clt before ui start inputDlg: " SetHelpFile $(!STF_WINDOWSSYSPATH)"\"sample.hlp 10 20 10 ui start "InputDlg" Debug-Output "clt after ui start inputDlg: " ifstr(i) $(DLGEVENT) == "CONTINUE" set speed = $(ListItemsOut) Debug-Output "clt Continue:"$(speed) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" ;;;;;; set CommonStatus = STATUS_USERCANCEL Debug-Output "select speed cancel." ui pop 1 goto end else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; set NewValueList = {{EtherID,$(NoTitle),$(!REG_VT_SZ),$(EtherID)},+ {Speed,$(NoTitle),$(!REG_VT_SZ),$(speed)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+ {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif Debug-Output "clt: leave if (R1 != yes)" endif ;;;;;;NO end;;;;;;;;;;;;;;;;;;;;;; EndForListDo Debug-Output "clt:Endforlistdo " ;;;;;;;clt end for loop ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; EndWait goto successful writeparameters = + ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Debug-Output "clt: begin writeparameters !" ;;;;clt 11/25/1996;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; set SpeedValue1 = "auto" set speed = "auto" set cltlist = {"auto", "10" ,"100"} read-syms SpeedDlg$(!STF_LANGUAGE) SetHelpFile $(!STF_WINDOWSSYSPATH)"\"sample.hlp 10 20 10 Debug-Output "clt before ui start inputDlg: " ui start "InputDlg" Debug-Output "clt after ui start inputDlg: " ifstr(i) $(DLGEVENT) == "CONTINUE" set speed = $(ListItemsOut) Debug-Output "clt Continue:"$(speed) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" ;;;;;; set CommonStatus = STATUS_USERCANCEL Debug-Output "select speed cancel." ui pop 1 goto end else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; set NewValueList = {{EtherID,$(NoTitle),$(!REG_VT_SZ),$(EtherID)},+ {Speed,$(NoTitle),$(!REG_VT_SZ),$(speed)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+ {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif Debug-Output "clt:end write parameter !! " ;;;;;;;clt end for loop ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "clt:ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-RSET] set STF_VITAL = "" AddSectionFilesToCopyList Files-RSET $(SrcDir) $(!STF_WINDOWSSYSPATH) ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif ifstr(i) $(DoConfig) == "YES" endif Exit [Install-help] set STF_VITAL = "" AddSectionFilesToCopyList Files-help $(SrcDir) $(!STF_WINDOWSSYSPATH) ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif ifstr(i) $(DoConfig) == "YES" endif Exit [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif ifstr(i) $(DoConfig) == "YES" endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-RSET $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-inf $(SrcDir) $(!STF_WINDOWSSYSPATH) exit [Source Media Descriptions] 1 = "Genius LAN GF100TXRII Fast Ethernet Adapter Driver Disk" ; from disk a:\ or b:\ [Signature] FileType = MICROSOFT_FILE [GetSignature] read-syms Signature return $(FileType) [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 1, oemsetup.inf, SIZE=50000, RENAME=$(!UG_Filename) [Files-RTL8139] 1,RTL8139.SYS , SIZE=50000 [Files-help] 1,sample.hlp, SIZE=50000 [Files-RSET] 1,TRACER.DLL , SIZE=50000 [LanguagesSupported] ENG [OptionsTextENG] RTL8139 = "Genius LAN GF100TXRII PCI Fast Ethernet Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = "Genius LAN GF100TXRII PCI Fast Ethernet Adapter Setup" ProductSoftwareDescription = "Genius LAN GF100TXRII PCI Fast Ethernet Adapter Driver" ProductHardwareRTL8139Description = "Genius LAN GF100TXRII PCI Fast Ethernet Adapter" ProductSoftwareTitle = "Genius LAN GF100TXRII PCI Fast Ethernet Adapter Driver" ProductHardwareRTL8139Title = "Genius LAN GF100TXRII PCI Fast Ethernet Adapter" ShellCodeErrorTitle = "Error: "$(FunctionTitle) ShellCodeErrorText = "Shell Code Error." [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] Caption = "Input Ethernet ID" DlgText = "Please input adapter's Ethernet ID: "$(!LF)+ "For example:"$(!LF)+ " Ethernet ID: 00 01 02 A3 B4 C5"$(!LF)$(!LF)+ "(This option is only required when you have more than "+ "one GF100TXRII PCI Fast Ethernet adapters on this computer. "+ "Select SKIP if only one adapter is installed on "+ "this computer.)" Edit1Label = "&Ethernet ID:" Continue = "&OK" Exit = "&Skip" Help = "&Help" DlgType = "Edit" DlgTemplate = "QUERY_COMPUTER_NAME" EditTextLim = 17 EditTextIn = $(EtherID) EditFocus = "ALL" [SpeedDlgENG] Caption = "Select Line Speed" DlgText = "This netcard support (1) auto detect (2) 10 Mbps (3) 100Mbps."+ " Please select one:" Continue = "OK" Cancel = "Cancel" Help = "&Help" DlgType = List DlgTemplate = "OEMSINGLESEL" HelpContext = 10 ListItemsIn = $(cltlist) ListItemsOut = $(SpeedValue1) ; ListItemsIn = $(OemOptionTextList) ; ListItemsOut = *($(OemOptionTextList),1)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.